[U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file

[Eric Nelson]

On 01/24/2014 04:27 AM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> MAINTAINERS file has been removed from the project.
>
> Replace its reference with 'boards.cfg' file instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>   board/boundary/nitrogen6x/README | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
> index 6f449be..9d84265 100644
> --- a/board/boundary/nitrogen6x/README
> +++ b/board/boundary/nitrogen6x/README
> @@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board:
>   	make
>
>   Note that 'nitrogen6x' is a placeholder. The complete list of supported
> -board configurations is shown in tha MAINTAINERS file:
> +board configurations is shown in the boards.cfg file:
>   	nitrogen6q		i.MX6Q/6D	1GB
>   	nitrogen6dl		i.MX6DL		1GB
>   	nitrogen6s		i.MX6S		512MB
>

Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>