[U-Boot] [PATCH v5 00/30] zynq: More boards support

[Albert ARIBAUD]

Hi Jagannadha,

On Thu, 9 Jan 2014 01:48:01 +0530, Jagannadha Sutradharudu Teki
<jagannadha.sutradharudu-teki at xilinx.com> wrote:

> These changes are from u-boot-xlnx.git repo from git.xilinx.com
> and in addition of basic fdt support. This repo is well tested
> on xilinx zynq platform, hence pushing the same on upstream.
> 
> Excluded qspi and nand changes from previous series.
> 
> --
> Thanks,
> Jagan.
> 
> Changes for v5:
> 	- rebase to u-boot-arm/master
> 	- Enabled CONFIG_DEFAULT_DEVICE_TREE in pre-board config files.
> 	- Updated build steps on doc/README.zynq
> Changes for v4:
>         - rebase to master
>         - Removed CONFIG_SYS_NO_FLASH in zynq-common.h
> Changes for v3:
>         - Removed CONFIG_ZYNQ_QSPI
>         - Removed CONFIG_NAND_ZYNQ
>         - Removed CONFIG_SYS_PROMPT_HUSH_PS2
>         - Documented bootmode detection code
>         - Added comments
> 
> Jagannadha Sutradharudu Teki (30):
>   zynq: Enable CONFIG_FIT_VERBOSE
>   zynq: Enable Boot FreeBSD/vxWorks
>   zynq: Cleanup on miscellaneous configs
>   zynq: Cleanup on memory configs
>   zynq: Minor config cleanup
>   zynq: Enable cache options
>   zynq: Add UART0, UART1 configs support
>   zynq: Add GEM0, GEM1 configs support
>   zynq-common: Rename zynq with zynq-common
>   doc: zynq: Add information on zynq u-boot
>   zynq: Add zynq zc70x board support
>   zynq: Add zynq zed board support
>   zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
>   zynq-common: Define exact TEXT_BASE
>   zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
>   zynq: Add zynq microzed board support
>   zynq: Add zynq_zc770 xm010 board support
>   zynq: Add zynq_zc770 xm013 board support
>   zynq: Add zynq_zc770 xm012 board support
>   zynq: Add support to find bootmode
>   zynq-common: Define default environment
>   zynq-common: Change Env. Sector size to 128Kb
>   zynq-common: Define flash env. partition
>   zynq-common: Define CONFIG_ENV_OVERWRITE
>   dts: zynq: Add basic fdt support
>   gpio: zynq: Add dummy gpio routines
>   zynq-common: Enable verified boot(RSA)
>   dts: zynq: Add more zynq dts files
>   zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
>   doc: Update the zynq u-boot status
> 
>  arch/arm/cpu/armv7/zynq/slcr.c             |   6 +
>  arch/arm/dts/zynq-7000.dtsi                |  13 ++
>  arch/arm/include/asm/arch-zynq/gpio.h      |  25 +++
>  arch/arm/include/asm/arch-zynq/sys_proto.h |   1 +
>  board/xilinx/dts/zynq-microzed.dts         |  14 ++
>  board/xilinx/dts/zynq-zc702.dts            |  14 ++
>  board/xilinx/dts/zynq-zc706.dts            |  14 ++
>  board/xilinx/dts/zynq-zc770-xm010.dts      |  14 ++
>  board/xilinx/dts/zynq-zc770-xm012.dts      |  14 ++
>  board/xilinx/dts/zynq-zc770-xm013.dts      |  14 ++
>  board/xilinx/dts/zynq-zed.dts              |  14 ++
>  board/xilinx/zynq/board.c                  |  25 +++
>  boards.cfg                                 |   8 +-
>  doc/README.zynq                            |  94 ++++++++++++
>  include/configs/zynq-common.h              | 238 +++++++++++++++++++++++++++++
>  include/configs/zynq.h                     | 139 -----------------
>  include/configs/zynq_microzed.h            |  26 ++++
>  include/configs/zynq_zc70x.h               |  29 ++++
>  include/configs/zynq_zc770.h               |  42 +++++
>  include/configs/zynq_zed.h                 |  27 ++++
>  20 files changed, 630 insertions(+), 141 deletions(-)
>  create mode 100644 arch/arm/dts/zynq-7000.dtsi
>  create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
>  create mode 100644 board/xilinx/dts/zynq-microzed.dts
>  create mode 100644 board/xilinx/dts/zynq-zc702.dts
>  create mode 100644 board/xilinx/dts/zynq-zc706.dts
>  create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
>  create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
>  create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
>  create mode 100644 board/xilinx/dts/zynq-zed.dts
>  create mode 100644 doc/README.zynq
>  create mode 100644 include/configs/zynq-common.h
>  delete mode 100644 include/configs/zynq.h
>  create mode 100644 include/configs/zynq_microzed.h
>  create mode 100644 include/configs/zynq_zc70x.h
>  create mode 100644 include/configs/zynq_zc770.h
>  create mode 100644 include/configs/zynq_zed.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.