[U-Boot] [PATCH 1/3 V3] esdhc: Workaround for card can't be detected on T4240QDS

[Zhang Haijun]

Many thanks.

Pantelis and York

How about below patch?

http://patchwork.ozlabs.org/patch/283002/

It's about esdhc, but is in york's backyard.


Regards

Haijun

On 01/22/2014 08:01 PM, Pantelis Antoniou wrote:
> Hi York,
>
> On Jan 22, 2014, at 12:01 AM, York Sun wrote:
>
>> Pantelis,
>>
>> On 01/09/2014 09:52 PM, Haijun Zhang wrote:
>>> Card detection pin is ineffective on T4240QDS Rev1.0.
>>> There are two cards can be connected to board.
>>> 1. eMMC card is built-in board, can not be removed. so
>>>    For eMMC card it is always there.
>>> 2. Card detecting pin is functional for SDHC card in Rev2.0.
>>>
>>> This workaround force sdhc driver scan and initialize the card
>>> regardless of whether the card is inserted or not in case Rev1.0.
>>>
>>> Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
>>> ---
>>> changes for V3:
>>> 	- Define quirk in board specific file instead of code in driver
>>> changes for V2:
>>> 	- Add the judgement condition for this broken card
>>>
>> I think this set of patches are in your backyard. If you ack them, I can apply
>> them to mpc85xx.
>>
> Go ahead please.
>
>> http://patchwork.ozlabs.org/patch/309168/
>> http://patchwork.ozlabs.org/patch/309167/
>> http://patchwork.ozlabs.org/patch/309170/
>>
>> York
>>
> Regards
>
> -- Pantelis
>
>
>