[U-Boot] [PATCH 1/5] edid: add function to convert edid to fb_videomode

[Eric Nelson]

Hi Fabio,

On 01/13/2014 05:36 PM, Fabio Estevam wrote:
> Hi Eric,
>
> On Fri, Jan 10, 2014 at 7:36 PM, Eric Nelson
> <eric.nelson at boundarydevices.com> wrote:
>
>> I just tried gluing this up for use in the Nitrogen6X HDMI channel,
>> but found that this is more difficult than expected.
>>
>> Apparently the i.MX6 clock tree doesn't (yet) support use with
>> the 1080P monitor I have connected.
>
> Yes, that's true.
>
> Should we try adding the common clock framework driver from the kernel
> into U-boot?
>

I think if we don't do it all at once, we'll end up doing it in
pieces...

Regards


Eric