[U-Boot] [PATCH 1/9] exynos4:pinmux:fdt: decode peripheral id

Piotr Wilczek p.wilczek at samsung.com
Tue Jan 28 13:13:50 CET 2014


Hi Jaehoon,

Thanks for review. Please comments below.

> -----Original Message-----
> 
> Hi, Piotr.
> 
> On 01/27/2014 11:15 PM, Piotr Wilczek wrote:
> > This patch adds api to decode peripheral id based in interrupt
> number.
> >
> > Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> > CC: Minkyu Kang <mk7.kang at samsung.com>
> > ---
> >  arch/arm/cpu/armv7/exynos/pinmux.c |   21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> >
> > diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c
> > b/arch/arm/cpu/armv7/exynos/pinmux.c
> > index 904177a..3201d53 100644
> > --- a/arch/arm/cpu/armv7/exynos/pinmux.c
> > +++ b/arch/arm/cpu/armv7/exynos/pinmux.c
> > @@ -741,6 +741,25 @@ int exynos_pinmux_config(int peripheral, int
> > flags)  }
> >
> >  #ifdef CONFIG_OF_CONTROL
> > +
> 
> Remove the white space.
Ok.

> 
> > +static int exynos4_pinmux_decode_periph_id(const void *blob, int
> > +node) {
> > +	int err;
> > +	u32 cell[3];
> > +
> > +	err = fdtdec_get_int_array(blob, node, "interrupts", cell,
> > +					ARRAY_SIZE(cell));
> > +	if (err)
> > +		return PERIPH_ID_NONE;
> > +
> > +	/* check for invalid peripheral id */
> > +	if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0))
> 
> What's condition checking? i didn't understand this.
> PERIPH_ID_SDMMC > cell[1] or PERIPH_ID_UART0 > cell[1] is valid?
> 
It supposed to check if cell[1] is within supported periph_id range and
should be like this:
If ((cell[1] >= PERIPH_ID_UART0) && (cell[1] < PERIPH_ID_COUNT))

> Best Regards,
> Jaehoon Chung
> 
> > +		return cell[1];
> > +
> > +	debug(" invalid peripheral id\n");
> > +	return PERIPH_ID_NONE;
> > +}
> > +
> >  static int exynos5_pinmux_decode_periph_id(const void *blob, int
> > node)  {
> >  	int err;
> > @@ -763,6 +782,8 @@ int pinmux_decode_periph_id(const void *blob, int
> > node)  {
> >  	if (cpu_is_exynos5())
> >  		return  exynos5_pinmux_decode_periph_id(blob, node);
> > +	else if (cpu_is_exynos4())
> > +		return  exynos4_pinmux_decode_periph_id(blob, node);
> >  	else
> >  		return PERIPH_ID_NONE;
> >  }
> >
Best regards,
Piotr Wilczek





More information about the U-Boot mailing list