[U-Boot] [PATCH v5 38/38] tools/env: cross-compile fw_printenv without setting HOSTCC
Masahiro Yamada
yamada.m at jp.panasonic.com
Fri Jan 17 12:11:07 CET 2014
fw_printenv is a program which mostly runs on the target Linux.
Before switching to Kbuild, we needed to set HOSTCC at the
command line like this:
make HOSTCC=<your CC cross-compiler> env
Going forward we can cross compile it by specifying CROSS_COMPILE:
make CROSS_COMPILE=<your cross-compiler prefix> env
This looks more natural.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
Changes in v5:
- Newly added
Changes in v4: None
Changes in v3: None
Changes in v2: None
tools/.gitignore | 1 -
tools/env/.gitignore | 2 ++
tools/env/Makefile | 17 ++++++++++++++---
tools/env/README | 5 ++---
4 files changed, 18 insertions(+), 7 deletions(-)
create mode 100644 tools/env/.gitignore
diff --git a/tools/.gitignore b/tools/.gitignore
index 13283b7..6e4a287 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -16,7 +16,6 @@
/xway-swap-bytes
/*.exe
/easylogo/easylogo
-/env/fw_printenv
/gdb/gdbcont
/gdb/gdbsend
/kernel-doc/docproc
diff --git a/tools/env/.gitignore b/tools/env/.gitignore
new file mode 100644
index 0000000..804abac
--- /dev/null
+++ b/tools/env/.gitignore
@@ -0,0 +1,2 @@
+fw_printenv
+fw_printenv_unstripped
diff --git a/tools/env/Makefile b/tools/env/Makefile
index d47fe16..10993c9 100644
--- a/tools/env/Makefile
+++ b/tools/env/Makefile
@@ -5,6 +5,11 @@
# SPDX-License-Identifier: GPL-2.0+
#
+# fw_printenv is supposed to run on the target system, which means it should be
+# built with cross tools. We only replace "HOSTCC" with "CC" for the maximum
+# code reuse of scripts/Makefile.host.
+HOSTCC = $(CC)
+
# Compile for a hosted environment on the target
HOST_EXTRACFLAGS = $(patsubst -I%,-idirafter%, $(UBOOTINCLUDE)) \
-idirafter $(SRCTREE)/tools/env \
@@ -15,9 +20,15 @@ ifeq ($(MTD_VERSION),old)
HOST_EXTRACFLAGS += -DMTD_OLD
endif
-hostprogs-y := fw_printenv
-always := $(hostprogs-y)
+always := fw_printenv
+hostprogs-y := fw_printenv_unstripped
-fw_printenv-objs := fw_env.o fw_env_main.o \
+fw_printenv_unstripped-objs := fw_env.o fw_env_main.o \
crc32.o ctype.o linux_string.o \
env_attr.o env_flags.o
+
+quiet_cmd_strip = STRIP $@
+ cmd_strip = $(STRIP) -o $@ $<
+
+$(obj)/fw_printenv: $(obj)/fw_printenv_unstripped FORCE
+ $(call if_changed,strip)
diff --git a/tools/env/README b/tools/env/README
index 1020b57..24e31bc 100644
--- a/tools/env/README
+++ b/tools/env/README
@@ -2,11 +2,10 @@
This is a demo implementation of a Linux command line tool to access
the U-Boot's environment variables.
-In the current version, there is an issue in cross-compilation.
In order to cross-compile fw_printenv, run
- make HOSTCC=<your CC cross-compiler> env
+ make CROSS_COMPILE=<your cross-compiler prefix> env
in the root directory of the U-Boot distribution. For example,
- make HOSTCC=arm-linux-gcc env
+ make CROSS_COMPILE=arm-linux- env
For the run-time utility configuration uncomment the line
#define CONFIG_FILE "/etc/fw_env.config"
--
1.8.3.2
More information about the U-Boot
mailing list