[U-Boot] [PATCH REPOST4 1/2] ARM: rpi_b: power on SDHCI and USB HW modules

[Albert ARIBAUD]

Hi Stephen,

On Mon, 13 Jan 2014 19:50:11 -0700, Stephen Warren
<swarren at wwwdotorg.org> wrote:

> Send RPC commands to the VideoCore to turn on the SDHCI and USB modules.
> For SDHCI this isn't needed in practice, since the firmware already
> turned on the power in order to load U-Boot. However, it's best to be
> explicit. For USB, this is necessary, since the module isn't powered
> otherwise. This will allow the kernel USB driver to work.
> 
> Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
> ---
> Could this please be applied for v2014.01? I know I did first post it
> after the merge window closed (by just a few hours...) but there's always
> plenty of other stuff that's accepted under similar timing.

I'm not against taking this in as this affects only a single board (and
provided Tom is OK too).

Also, I'd really like to know whether the three reposts are actually
versions (in which case I'd have liked a version history, even limited
to "vN: rebase" if such is the case) or pings (in which case I'd prefer
"ping?" replies, as these replies do not create patch entries in
patchwork).

Amicalement,
-- 
Albert.