[U-Boot] U-Boot execution sequence

[Jagan Teki]

On Fri, Jan 24, 2014 at 11:44 AM, JYOTI DUBEY <jyoti0801 at gmail.com> wrote:
> while compiling I got an error System not configured - see README. SO how
> can I configure it for NItrogen6x board?

Please elaborate the steps what you did?

>
>
> On Thu, Jan 23, 2014 at 8:38 PM, Jagan Teki <jagannadh.teki at gmail.com>
> wrote:
>>
>> Have some boot flow png's long back with previous version (not the
>> current) [1]
>> I thought it could be a starter - not equivalently same.
>> If possible better take this as a reference and start tagging around the
>> source.
>>
>> [1] http://jagannadhteki.blog.com/2014/01/23/u-boot-functional-flowarm/
>>
>> thanks!
>>
>> On Thu, Jan 23, 2014 at 6:10 PM, Mj Embd <mj.embd at gmail.com> wrote:
>> > a) step 1 - compile and build the bin / etf
>> > b) step 2 - create an asm - objdump -DS
>> > c) find the lds file
>> > d) locate uboot.map
>> >
>> > start from __start. (keep an arm manual handy) & begin.
>> >
>> > :)
>> >
>> > On 1/23/14, JYOTI DUBEY <jyoti0801 at gmail.com> wrote:
>> >> Can anyone tell how to understand the flow of u-boot source code? I am
>> >> working on ARM processor and the board used is Nitrogen6X.
>>
>> --
>> Jagan.
>
>



-- 
Jagan.