[U-Boot] U-Boot execution sequence

JYOTI DUBEY jyoti0801 at gmail.com
Fri Jan 24 07:14:30 CET 2014


while compiling I got an error System not configured - see README. SO how
can I configure it for NItrogen6x board?


On Thu, Jan 23, 2014 at 8:38 PM, Jagan Teki <jagannadh.teki at gmail.com>wrote:

> Have some boot flow png's long back with previous version (not the
> current) [1]
> I thought it could be a starter - not equivalently same.
> If possible better take this as a reference and start tagging around the
> source.
>
> [1] http://jagannadhteki.blog.com/2014/01/23/u-boot-functional-flowarm/
>
> thanks!
>
> On Thu, Jan 23, 2014 at 6:10 PM, Mj Embd <mj.embd at gmail.com> wrote:
> > a) step 1 - compile and build the bin / etf
> > b) step 2 - create an asm - objdump -DS
> > c) find the lds file
> > d) locate uboot.map
> >
> > start from __start. (keep an arm manual handy) & begin.
> >
> > :)
> >
> > On 1/23/14, JYOTI DUBEY <jyoti0801 at gmail.com> wrote:
> >> Can anyone tell how to understand the flow of u-boot source code? I am
> >> working on ARM processor and the board used is Nitrogen6X.
>
> --
> Jagan.
>


More information about the U-Boot mailing list