[U-Boot] [PATCH V3 13/14] ARM: tegra: add Venice2 (Tegra124) board
Stephen Warren
swarren at wwwdotorg.org
Fri Jan 24 20:46:18 CET 2014
From: Tom Warren <twarren.nvidia at gmail.com>
These are the board files for Venice2 (Tegra124), plus the AS3722 PMIC
files. PMIC init will be moved to pmic_common_init later.
This builds/boots on Venice2, SPI/MMC/USB/I2C all work. Audio, display
and WB/LP0 are not supported yet.
Signed-off-by: Tom Warren <twarren at nvidia.com>
Signed-off-by: Stephen Warren <swarren at nvidia.com>
Tested-by: Thierry Reding <treding at nvidia.com>
---
v2:
* Convert to Kconfig-style make Makefiles.
* Updated default environment to enable bootcmd_pxe.
* Removed most functional diffs (i.e. other than SoC name, valid values,
etc.) between include/configs/tegra1[12]4-common.h.
* Deleted PMIC programming code that was disabled; it can be added later
if it turns out to be useful.
* Fixed boards.cfg sort order.
* Removed unused define CONFIG_TEGRA_USE_EMC_DRAM_SIZE.
* Minor comment cleanup.
---
board/nvidia/venice2/Makefile | 9 +
board/nvidia/venice2/as3722_init.c | 91 +++++++
board/nvidia/venice2/as3722_init.h | 38 +++
board/nvidia/venice2/pinmux-config-venice2.h | 339 +++++++++++++++++++++++++++
board/nvidia/venice2/venice2.c | 33 +++
boards.cfg | 1 +
include/configs/tegra124-common.h | 82 +++++++
include/configs/venice2.h | 79 +++++++
8 files changed, 672 insertions(+)
create mode 100644 board/nvidia/venice2/Makefile
create mode 100644 board/nvidia/venice2/as3722_init.c
create mode 100644 board/nvidia/venice2/as3722_init.h
create mode 100644 board/nvidia/venice2/pinmux-config-venice2.h
create mode 100644 board/nvidia/venice2/venice2.c
create mode 100644 include/configs/tegra124-common.h
create mode 100644 include/configs/venice2.h
diff --git a/board/nvidia/venice2/Makefile b/board/nvidia/venice2/Makefile
new file mode 100644
index 000000000000..5fac5ab1f81f
--- /dev/null
+++ b/board/nvidia/venice2/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2013-2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += as3722_init.o
+obj-y += venice2.o
diff --git a/board/nvidia/venice2/as3722_init.c b/board/nvidia/venice2/as3722_init.c
new file mode 100644
index 000000000000..960fea7ee7e3
--- /dev/null
+++ b/board/nvidia/venice2/as3722_init.c
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include "as3722_init.h"
+
+/* AS3722-PMIC-specific early init code - get CPU rails up, etc */
+
+void tegra_i2c_ll_write_addr(uint addr, uint config)
+{
+ struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+ writel(addr, ®->cmd_addr0);
+ writel(config, ®->cnfg);
+}
+
+void tegra_i2c_ll_write_data(uint data, uint config)
+{
+ struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+ writel(data, ®->cmd_data1);
+ writel(config, ®->cnfg);
+}
+
+void pmic_enable_cpu_vdd(void)
+{
+ debug("%s entry\n", __func__);
+
+ /* Don't need to set up VDD_CORE - already done - by OTP */
+
+ debug("%s: Setting VDD_CPU to 1.0V via AS3722 reg 0/4D\n", __func__);
+ /*
+ * Bring up VDD_CPU via the AS3722 PMIC on the PWR I2C bus.
+ * First set VDD to 1.0V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(AS3722_SD0VOLTAGE_DATA, I2C_SEND_2_BYTES);
+ /*
+ * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled.
+ * tegra_i2c_ll_write_data(AS3722_SD0CONTROL_DATA, I2C_SEND_2_BYTES);
+ */
+ udelay(10 * 1000);
+
+ debug("%s: Setting VDD_GPU to 1.0V via AS3722 reg 6/4D\n", __func__);
+ /*
+ * Bring up VDD_GPU via the AS3722 PMIC on the PWR I2C bus.
+ * First set VDD to 1.0V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(AS3722_SD6VOLTAGE_DATA, I2C_SEND_2_BYTES);
+ /*
+ * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled.
+ * tegra_i2c_ll_write_data(AS3722_SD6CONTROL_DATA, I2C_SEND_2_BYTES);
+ */
+ udelay(10 * 1000);
+
+ debug("%s: Set VPP_FUSE to 1.2V via AS3722 reg 0x12/4E\n", __func__);
+ /*
+ * Bring up VPP_FUSE via the AS3722 PMIC on the PWR I2C bus.
+ * First set VDD to 1.2V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(AS3722_LDO2VOLTAGE_DATA, I2C_SEND_2_BYTES);
+ /*
+ * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled.
+ * tegra_i2c_ll_write_data(AS3722_LDO2CONTROL_DATA, I2C_SEND_2_BYTES);
+ */
+ udelay(10 * 1000);
+
+ debug("%s: Set VDD_SDMMC to 3.3V via AS3722 reg 0x16/4E\n", __func__);
+ /*
+ * Bring up VDD_SDMMC via the AS3722 PMIC on the PWR I2C bus.
+ * First set it to bypass 3.3V straight thru, then enable the regulator
+ *
+ * NOTE: We do this early because doing it later seems to hose the CPU
+ * power rail/partition startup. Need to debug.
+ */
+ tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(AS3722_LDO6VOLTAGE_DATA, I2C_SEND_2_BYTES);
+ /*
+ * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled.
+ * tegra_i2c_ll_write_data(AS3722_LDO6CONTROL_DATA, I2C_SEND_2_BYTES);
+ */
+ udelay(10 * 1000);
+}
diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
new file mode 100644
index 000000000000..2a9e7cdf8721
--- /dev/null
+++ b/board/nvidia/venice2/as3722_init.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* AS3722-PMIC-specific early init regs */
+
+#define AS3722_I2C_ADDR 0x80
+
+#define AS3722_SD0VOLTAGE_REG 0x00 /* CPU */
+#define AS3722_SD1VOLTAGE_REG 0x01 /* CORE, already set by OTP */
+#define AS3722_SD6VOLTAGE_REG 0x06 /* GPU */
+#define AS3722_SDCONTROL_REG 0x4D
+
+#define AS3722_LDO2VOLTAGE_REG 0x12 /* VPP_FUSE */
+#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
+#define AS3722_LDCONTROL_REG 0x4E
+
+#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
+#define AS3722_SD0CONTROL_DATA (0x0100 | AS3722_SDCONTROL_REG)
+
+#define AS3722_SD1VOLTAGE_DATA (0x3200 | AS3722_SD1VOLTAGE_REG)
+#define AS3722_SD1CONTROL_DATA (0x0200 | AS3722_SDCONTROL_REG)
+
+#define AS3722_SD6CONTROL_DATA (0x4000 | AS3722_SDCONTROL_REG)
+#define AS3722_SD6VOLTAGE_DATA (0x2800 | AS3722_SD6VOLTAGE_REG)
+
+#define AS3722_LDO2CONTROL_DATA (0x0400 | AS3722_LDCONTROL_REG)
+#define AS3722_LDO2VOLTAGE_DATA (0x1000 | AS3722_LDO2VOLTAGE_REG)
+
+#define AS3722_LDO6CONTROL_DATA (0x4000 | AS3722_LDCONTROL_REG)
+#define AS3722_LDO6VOLTAGE_DATA (0x3F00 | AS3722_LDO6VOLTAGE_REG)
+
+#define I2C_SEND_2_BYTES 0x0A02
+
+void pmic_enable_cpu_vdd(void);
diff --git a/board/nvidia/venice2/pinmux-config-venice2.h b/board/nvidia/venice2/pinmux-config-venice2.h
new file mode 100644
index 000000000000..50868e6488d2
--- /dev/null
+++ b/board/nvidia/venice2/pinmux-config-venice2.h
@@ -0,0 +1,339 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_VENICE2_H_
+#define _PINMUX_CONFIG_VENICE2_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define USB_PINMUX CEC_PINMUX
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .padgrp = PDRIVE_PINGROUP_##_padgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PGRP_LPMD_##_lpmd, \
+ .schmt = PGRP_SCHMT_##_schmt, \
+ .hsm = PGRP_HSM_##_hsm, \
+ }
+
+static struct pingroup_config tegra124_pinmux_common[] = {
+ /* EXTPERIPH1 pinmux */
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT),
+
+ /* I2S0 pinmux */
+ DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+
+ /* I2S1 pinmux */
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* I2S3 pinmux */
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLDVFS pinmux */
+ DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4, ULPI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, ULPI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT),
+
+ /* EC KBC/SPI */
+ DEFAULT_PINMUX(ULPI_CLK, SPI1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DIR, SPI1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, SPI1, NORMAL, NORMAL, INPUT),
+
+ /* I2C3 (TPM) pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* UARTD pinmux (UART4 on Servo board, unused) */
+ DEFAULT_PINMUX(GPIO_PJ7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PB0, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PB1, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PK7, UARTD, NORMAL, NORMAL, OUTPUT),
+
+ /* SPI4 (Winbond 'boot ROM') */
+ DEFAULT_PINMUX(GPIO_PG5, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PG6, SPI4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PG7, SPI4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PI3, SPI4, NORMAL, NORMAL, INPUT),
+
+ /* Touch IRQ */
+ DEFAULT_PINMUX(GPIO_W3_AUD, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* PWM1 pinmux */
+ DEFAULT_PINMUX(GPIO_PH1, PWM1, NORMAL, NORMAL, OUTPUT),
+
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT),
+
+ /* BLINK pinmux */
+ DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC pinmux */
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+
+ /* Misc */
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT),
+
+ /* UARTA pinmux (BR_UART_TXD/RXD on Servo board) */
+ DEFAULT_PINMUX(KB_ROW9, UARTA, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW10, UARTA, UP, TRISTATE, INPUT),
+
+ /* I2CPWR pinmux (I2C5) */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* RTCK pinmux */
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT),
+
+ /* CLK pinmux */
+ DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT),
+
+ /* PWRON pinmux */
+ DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT),
+
+ /* CPU pinmux */
+ DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT),
+
+ /* PMI pinmux */
+ DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT),
+
+ /* RESET_OUT_N pinmux */
+ DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT),
+
+ /* EXTPERIPH3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* UARTB, GPS */
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
+
+ /* UARTC (WIFI/BT) */
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* CEC pinmux */
+ CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* I2C4 (HDMI_DDC) pinmux */
+ DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+ DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+
+ /* USB pinmux */
+ USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+ USB_PINMUX(USB_VBUS_EN1, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+
+ /* Unused, marked SNN_ on schematic, TRISTATE 'em */
+ DEFAULT_PINMUX(GPIO_PBB0, RSVD3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB3, RSVD3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB4, RSVD3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, RSVD2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PH3, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PI7, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PJ2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_X5_AUD, RSVD3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_X6_AUD, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GPIO_PFF2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(USB_VBUS_EN2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL5, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW5, RSVD2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW13, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW14, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW16, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(OWR, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_FS, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, RSVD2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(CLK2_OUT, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC1_WP_N, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(CAM_MCLK, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(CLK3_REQ, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT, RSVD1, NORMAL, TRISTATE, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+ DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT),
+};
+
+/* Initially setting all used GPIO's to non-TRISTATE */
+static struct pingroup_config tegra124_pinmux_set_nontristate[] = {
+ DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT),
+
+ /* EN_VDD_BL */
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT),
+
+ /* MODEM */
+ DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* BOOT_SEL0-3 */
+ DEFAULT_PINMUX(GPIO_PG0, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PG1, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PG2, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PG3, GMI, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
+
+ /* TS_SHDN_L */
+ DEFAULT_PINMUX(GPIO_PK1, GMI, NORMAL, NORMAL, OUTPUT),
+};
+
+static struct padctrl_config venice2_padctrl[] = {
+ /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR,
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE),
+};
+#endif /* PINMUX_CONFIG_VENICE2_H */
diff --git a/board/nvidia/venice2/venice2.c b/board/nvidia/venice2/venice2.c
new file mode 100644
index 000000000000..1ed2fd788ec1
--- /dev/null
+++ b/board/nvidia/venice2/venice2.c
@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2013-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-venice2.h"
+#include <i2c.h>
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_table(tegra124_pinmux_set_nontristate,
+ ARRAY_SIZE(tegra124_pinmux_set_nontristate));
+
+ pinmux_config_table(tegra124_pinmux_common,
+ ARRAY_SIZE(tegra124_pinmux_common));
+
+ pinmux_config_table(unused_pins_lowpower,
+ ARRAY_SIZE(unused_pins_lowpower));
+
+ /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+ padgrp_config_table(venice2_padctrl, ARRAY_SIZE(venice2_padctrl));
+}
diff --git a/boards.cfg b/boards.cfg
index a8336cc7a9a0..a884afa97f5e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -363,6 +363,7 @@ Active arm armv7 zynq xilinx zynq zynq_zc770_xm010
Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren at nvidia.com>
+Active arm armv7:arm720t tegra124 nvidia venice2 venice2 - Tom Warren <twarren at nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel <alban.bedel at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel <alban.bedel at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design tec tec - Alban Bedel <alban.bedel at avionic-design.de>
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
new file mode 100644
index 000000000000..32d5bc9c950f
--- /dev/null
+++ b/include/configs/tegra124-common.h
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _TEGRA124_COMMON_H_
+#define _TEGRA124_COMMON_H_
+
+#include "tegra-common.h"
+
+/* Cortex-A15 uses a cache line size of 64 bytes */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA124 /* is an NVIDIA Tegra124 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */
+#define CONFIG_STACKBASE 0x82800000 /* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x90000000\0" \
+ "pxefile_addr_r=0x90100000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
+#define CONFIG_SPL_STACK 0x800ffffc
+
+/* Total I2C ports on Tegra124 */
+#define TEGRA_I2C_NUM_CONTROLLERS 5
+
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
+#endif /* _TEGRA124_COMMON_H_ */
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
new file mode 100644
index 000000000000..91808e920388
--- /dev/null
+++ b/include/configs/venice2.h
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2013-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+
+#include "tegra124-common.h"
+
+/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra124 (Venice2) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+
+/* SPI */
+#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */
+#define CONFIG_TEGRA114_SPI_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--
1.8.1.5
More information about the U-Boot
mailing list