[U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.
Enric Balletbo Serra
eballetbo at gmail.com
Fri Jan 24 09:45:36 CET 2014
Hi Tom,
2014/1/6 Tom Rini <trini at ti.com>:
> On Mon, Dec 23, 2013 at 12:11:25PM +0100, Enric Balletbo Serra wrote:
>> 2013/12/6 Enric Balletbo i Serra <eballetbo at gmail.com>:
>> > Hi all,
>> >
>> > Most of the boards based on TI processors uses common configuration files
>> > (ti_armv7_common.h, ti_<processor>_common.h) to avoid duplication of code.
>> > This is right except for OMAP3-based boards. In order to use the same schema
>> > as used on am33xx, omap4, omap5 and dra7 TI processors these patches create
>> > a new ti_omap3_common.h (that include ti_armv7_common.h) with the purpose that
>> > all OMAP3 board can use it.
>> >
>> > Patches 1 and 2 just renames current omap4|omap5_common.h to
>> > ti_omap4|omap5_common.h to be coherent with current ti_am33xx_common.h,
>> > ti_armv7_common.h and the new ti_omap3_common.h. It's just a cosmetic change so
>> > if people don't like it I don't have any inconvenient to remove from these
>> > series.
>> >
>> > Patches 3 and 4 modifies the ti_armv7_common.h to be more compatible with OMAP3
>> > boards. For example, patch 3 removes the assumption that all ti_armv7 have an
>> > ELM hardware engine and patch 4 handles the case that the number of DRAM banks
>> > is defined at board level. The patch 5 is also required to integrate the use
>> > of ti_armv7_common.h on OMAP3 boards.
>> >
>> > Patch 6 creates the new ti_omap3_common.h to be used for any OMAP3-based board.
>> >
>> > And finally, patch 7 moves the IGEP boards to use the new common file. As I
>> > only have IGEP hardware to test these patches I decided only implement the use
>> > case for these boards. I don't have any inconvenient to move other OMAP3 boards
>> > to use this schema but I prefer leave the decision to the board maintainers.
>> >
>> > Any comments, improvements, fixes are welcome.
>> >
>> > Best regards,
>> >
>> > Enric Balletbo i Serra (7):
>> > ARM: OMAP4: Rename to ti_omap4_common.h
>> > ARM: OMAP5: Rename to ti_omap5_common.h
>> > TI: armv7: Move ELM support to SoC configuration file.
>> > TI: armv7: Do not define the number DRAM banks if is already defined.
>> > ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
>> > TI: OMAP3: Create common config files for TI OMAP3 platforms.
>> > OMAP3: igep00x0: Convert to ti_omap3_common.h.
>> >
>> > arch/arm/include/asm/arch-omap3/omap3.h | 6 +-
>> > include/configs/dra7xx_evm.h | 4 +-
>> > include/configs/omap3_igep00x0.h | 190 +--------------------
>> > include/configs/omap4_panda.h | 4 +-
>> > include/configs/omap4_sdp4430.h | 4 +-
>> > include/configs/omap5_uevm.h | 4 +-
>> > include/configs/ti_am335x_common.h | 4 +
>> > include/configs/ti_armv7_common.h | 11 +-
>> > include/configs/ti_omap3_common.h | 73 ++++++++
>> > .../configs/{omap4_common.h => ti_omap4_common.h} | 10 +-
>> > .../configs/{omap5_common.h => ti_omap5_common.h} | 10 +-
>> > 11 files changed, 118 insertions(+), 202 deletions(-)
>> > create mode 100644 include/configs/ti_omap3_common.h
>> > rename include/configs/{omap4_common.h => ti_omap4_common.h} (95%)
>> > rename include/configs/{omap5_common.h => ti_omap5_common.h} (95%)
>>
>> Ping, any comment on this patch series ?
>
> I intend to pick this up after v2014.01. Thanks!
>
Now that merge window is open, did you try to pick these patches?
There is an issue that affect the IGEP boards introduced by commit
commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d
arm: omap3: Enable clocks for peripherals only if they are used
To fix the issue, I need to modify the omap3_igep00x0.h file and I'm
thinking that it's preferable wait and send the patch after these
patches.
Also there is any plan to create a branch for 2014.01 with fixes ?
Cheers,
Enric
> --
> Tom
More information about the U-Boot
mailing list