[U-Boot] [RFC][PATCH 0/7] TI: OMAP3: Use common config file.

[Tom Rini]

On Mon, Dec 23, 2013 at 12:11:25PM +0100, Enric Balletbo Serra wrote:
> 2013/12/6 Enric Balletbo i Serra <eballetbo at gmail.com>:
> > Hi all,
> >
> > Most of the boards based on TI processors uses common configuration files
> > (ti_armv7_common.h, ti_<processor>_common.h) to avoid duplication of code.
> > This is right except for OMAP3-based boards. In order to use the same schema
> > as used on am33xx, omap4, omap5 and dra7 TI processors these patches create
> > a new ti_omap3_common.h (that include ti_armv7_common.h) with the purpose that
> > all OMAP3 board can use it.
> >
> > Patches 1 and 2 just renames current omap4|omap5_common.h to
> > ti_omap4|omap5_common.h to be coherent with current ti_am33xx_common.h,
> > ti_armv7_common.h and the new ti_omap3_common.h. It's just a cosmetic change so
> > if people don't like it I don't have any inconvenient to remove from these
> > series.
> >
> > Patches 3 and 4 modifies the ti_armv7_common.h to be more compatible with OMAP3
> > boards. For example, patch 3 removes the assumption that all ti_armv7 have an
> > ELM hardware engine and patch 4 handles the case that the number of DRAM banks
> > is defined at board level. The patch 5 is also required to integrate the use
> > of ti_armv7_common.h on OMAP3 boards.
> >
> > Patch 6 creates the new ti_omap3_common.h to be used for any OMAP3-based board.
> >
> > And finally, patch 7 moves the IGEP boards to use the new common file. As I
> > only have IGEP hardware to test these patches I decided only implement the use
> > case for these boards. I don't have any inconvenient to move other OMAP3 boards
> > to use this schema but I prefer leave the decision to the board maintainers.
> >
> > Any comments, improvements, fixes are welcome.
> >
> > Best regards,
> >
> > Enric Balletbo i Serra (7):
> >   ARM: OMAP4: Rename to ti_omap4_common.h
> >   ARM: OMAP5: Rename to ti_omap5_common.h
> >   TI: armv7: Move ELM support to SoC configuration file.
> >   TI: armv7: Do not define the number DRAM banks if is already defined.
> >   ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
> >   TI: OMAP3: Create common config files for TI OMAP3 platforms.
> >   OMAP3: igep00x0: Convert to ti_omap3_common.h.
> >
> >  arch/arm/include/asm/arch-omap3/omap3.h            |   6 +-
> >  include/configs/dra7xx_evm.h                       |   4 +-
> >  include/configs/omap3_igep00x0.h                   | 190 +--------------------
> >  include/configs/omap4_panda.h                      |   4 +-
> >  include/configs/omap4_sdp4430.h                    |   4 +-
> >  include/configs/omap5_uevm.h                       |   4 +-
> >  include/configs/ti_am335x_common.h                 |   4 +
> >  include/configs/ti_armv7_common.h                  |  11 +-
> >  include/configs/ti_omap3_common.h                  |  73 ++++++++
> >  .../configs/{omap4_common.h => ti_omap4_common.h}  |  10 +-
> >  .../configs/{omap5_common.h => ti_omap5_common.h}  |  10 +-
> >  11 files changed, 118 insertions(+), 202 deletions(-)
> >  create mode 100644 include/configs/ti_omap3_common.h
> >  rename include/configs/{omap4_common.h => ti_omap4_common.h} (95%)
> >  rename include/configs/{omap5_common.h => ti_omap5_common.h} (95%)
> 
> Ping, any comment on this patch series ?

I intend to pick this up after v2014.01.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140106/aaa3b801/attachment.pgp>