[U-Boot] [PULL-Update] : Please pull u-boot-imx
Albert ARIBAUD
albert.u.boot at aribaud.net
Mon Jan 6 09:31:53 CET 2014
Hi Stefano,
On Fri, 03 Jan 2014 15:51:14 +0100, Stefano Babic <sbabic at denx.de>
wrote:
> On 02/01/2014 17:25, Stefano Babic wrote:
> > Hi Albert,
> >
> > my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !
> >
>
> Albert, I forget to merge some further patches. This is my updated PULL
> request:
>
> The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
>
> arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 4611d5bab26f93471b84f6f33967cef69b3f723a:
>
> arm: mx5: Add fuse supply enable in fsl_iim (2014-01-03 15:44:06 +0100)
>
> ----------------------------------------------------------------
> Eric Nelson (8):
> i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
> i.MX6DQ/DLS: remove useless mux/pad declarations
> i.MX6DQ: Add Pinmux settings that are present in mainline and
> Dual-Lite/Solo
> i.MX6DQ/DLS: remove unused pad declarations
> i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
> imx-common: remove extraneous semicolon from macro
> i.MX6 (DQ/DLS): use macros for mux and pad declarations
> ARM: mx6: Update non-Freescale boards to include CPU errata.
>
> Fabio Estevam (24):
> configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
> wandboard: Return the error immediately when ipuv3_fb_init() fails
> wandboard: Return the error when cpu_eth_init() fails
> titanium: Return the error when cpu_eth_init() fails
> nitrogen6x: Remove unused OCOTP options
> mx51evk: Fix pmic_init() argument
> mx31pdk: Fix pmic_init() argument
> efikamx: Fix pmic_init() argument
> power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
> mx6sabresd: Fix wrong colors in LVDS splash
> mx6sabresd: Add SPI NOR support
> imx: Explicitly pass the I2C bus number in pmic_init()
> configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
> mx6: clock: Fix the calculation of PLL_ENET frequency
> mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
> mx6sabresd: Fix LVDS width and color format
> doc: README.fuse: Add an example on how to use the fuse API on mx6q
> mx6sabre_common.h: Add CONFIG_CMD_FUSE support
> mx6: soc: Staticize set_vddsoc()
> mx6: soc: Clear the LDO ramp values up prior to setting the LDO
> voltages
> mx6: soc: Set the VDDSOC at 1.175 V
> mx6: soc: Introduce set_ldo_voltage()
> mx6: soc: Add the required LDO ramp up delay
> mx6: soc: Disable VDDPU regulator
>
> Frank Li (1):
> imx6: fix random hang when download by usb
>
> Giuseppe Pagano (5):
> udoo: Move and optimize platform register setting.
> udoo: Add ethernet support (FEC + Micrel KSZ9031).
> udoo: Fix watchdog during kernel boot.
> nitrogen6x: Move setup_sata to common part
> udoo: Add SATA support on uDoo Board.
>
> Liu Ying (1):
> MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
>
> Marek Vasut (3):
> Net: FEC: Fix huge memory leak
> ARM: mx53: video: Add IPUv3 LCD support for M53EVK
> ARM: mxs: tools: Fix errno handling in strtoul() invocation
>
> Michael Heimpold (1):
> mxs_gpio: fix the handling in gpio_direction_output()
>
> Otavio Salvador (6):
> imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
> mx28evk: Use 512k for fdt partition to align it
> mx28evk: Add 'nandboot' environment command
> mx28evk: Extend environment to easy write of NAND system
> ARM: mx6: Change the FDT loading address to avoid overlaping
> ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
>
> Sergey Alyoshin (1):
> arm: mx5: Add fuse supply enable in fsl_iim
>
> Stefan Roese (1):
> mx6: titanium: Move BSP code to barco board directory
>
> Stefano Babic (1):
> MX6: fix sata compilation for i.MX6
>
> arch/arm/cpu/armv7/mx5/clock.c | 12 +
> arch/arm/cpu/armv7/mx6/clock.c | 23 +-
> arch/arm/cpu/armv7/mx6/soc.c | 110 +-
> arch/arm/imx-common/Makefile | 3 +
> arch/arm/imx-common/cpu.c | 4 +-
> arch/arm/imx-common/sata.c | 34 +
> arch/arm/include/asm/arch-mx5/clock.h | 1 +
> arch/arm/include/asm/arch-mx5/crm_regs.h | 3 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 23 +
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 33 +-
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2728
> +++++++++-------------
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 2642
> ++++++++-------------
> arch/arm/include/asm/arch-mx6/sys_proto.h | 2 -
> arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
> arch/arm/include/asm/imx-common/sata.h | 16 +
> board/{freescale => barco}/titanium/Makefile | 0
> board/{freescale => barco}/titanium/imximage.cfg | 0
> board/{freescale => barco}/titanium/titanium.c | 110 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 197 +-
> board/congatec/cgtqmx6eval/cgtqmx6eval.c | 40 +-
> board/denx/m53evk/m53evk.c | 73 +
> board/freescale/mx25pdk/mx25pdk.c | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 2 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/freescale/mx53evk/mx53evk.c | 2 +-
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 68 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 62 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 155 +-
> board/genesi/mx51_efikamx/efikamx.c | 2 +-
> board/udoo/1066mhz_4x256mx16.cfg | 55 +
> board/udoo/clocks.cfg | 32 +
> board/udoo/ddr-setup.cfg | 87 +
> board/udoo/udoo.c | 165 +-
> board/udoo/udoo.cfg | 29 +
> board/wandboard/wandboard.c | 60 +-
> boards.cfg | 4 +-
> doc/README.imx6 | 76 +
> drivers/gpio/mxs_gpio.c | 4 +-
> drivers/misc/fsl_iim.c | 13 +-
> drivers/net/fec_mxc.c | 177 +-
> drivers/power/power_fsl.c | 3 +-
> include/configs/cgtqmx6eval.h | 2 +-
> include/configs/imx31_phycore.h | 1 -
> include/configs/m53evk.h | 16 +
> include/configs/mx25pdk.h | 2 -
> include/configs/mx28evk.h | 56 +-
> include/configs/mx31pdk.h | 1 -
> include/configs/mx35pdk.h | 2 -
> include/configs/mx51evk.h | 1 -
> include/configs/mx53ard.h | 1 -
> include/configs/mx53evk.h | 2 -
> include/configs/mx53loco.h | 2 -
> include/configs/mx53smd.h | 2 -
> include/configs/mx6_common.h | 1 +
> include/configs/mx6qarm2.h | 1 -
> include/configs/mx6sabre_common.h | 20 +-
> include/configs/nitrogen6x.h | 13 +-
> include/configs/titanium.h | 1 +
> include/configs/udoo.h | 31 +-
> include/configs/wandboard.h | 3 +-
> include/micrel.h | 5 +
> tools/mxsimage.c | 1 +
> 65 files changed, 3444 insertions(+), 3781 deletions(-)
> create mode 100644 arch/arm/imx-common/sata.c
> create mode 100644 arch/arm/include/asm/imx-common/sata.h
> rename board/{freescale => barco}/titanium/Makefile (100%)
> rename board/{freescale => barco}/titanium/imximage.cfg (100%)
> rename board/{freescale => barco}/titanium/titanium.c (66%)
> create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
> create mode 100644 board/udoo/clocks.cfg
> create mode 100644 board/udoo/ddr-setup.cfg
> create mode 100644 board/udoo/udoo.cfg
>
> Thanks,
> Stefano
>
Applied to u-boot-arm/master (with a cosmetic merge conflict
resolution on include/micrel.h), thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list