[U-Boot] [PATCH v2 2/9] kmp204x: introduce QRIO GPIO functions
Valentin Longchamp
valentin.longchamp at keymile.com
Mon Jan 27 11:49:05 CET 2014
The QRIO GPIO functions can be of general interest. They are thus added
to a qrio.c and their prototype are available from kmp204x.h. The QRIO
prst function are also included in this file, as well as the functions
required for the I2C deblocking support (open-drain).
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
---
Changes in v2: None
board/keymile/kmp204x/Makefile | 2 +-
board/keymile/kmp204x/kmp204x.c | 56 ---------------
board/keymile/kmp204x/kmp204x.h | 10 +++
board/keymile/kmp204x/qrio.c | 147 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 158 insertions(+), 57 deletions(-)
create mode 100644 board/keymile/kmp204x/qrio.c
diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile
index 3e69ee2..c57ca08 100644
--- a/board/keymile/kmp204x/Makefile
+++ b/board/keymile/kmp204x/Makefile
@@ -8,5 +8,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \
+obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \
../common/common.o ../common/ivm.o
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 20a3264..bbb2453 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -77,62 +77,6 @@ unsigned long get_board_sys_clk(unsigned long dummy)
return 66666666;
}
-#define WDMASK_OFF 0x16
-
-static void qrio_wdmask(u8 bit, bool wden)
-{
- u16 wdmask;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- wdmask = in_be16(qrio_base + WDMASK_OFF);
-
- if (wden)
- wdmask |= (1 << bit);
- else
- wdmask &= ~(1 << bit);
-
- out_be16(qrio_base + WDMASK_OFF, wdmask);
-}
-
-#define PRST_OFF 0x1a
-
-void qrio_prst(u8 bit, bool en, bool wden)
-{
- u16 prst;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- qrio_wdmask(bit, wden);
-
- prst = in_be16(qrio_base + PRST_OFF);
-
- if (en)
- prst &= ~(1 << bit);
- else
- prst |= (1 << bit);
-
- out_be16(qrio_base + PRST_OFF, prst);
-}
-
-#define PRSTCFG_OFF 0x1c
-
-void qrio_prstcfg(u8 bit, u8 mode)
-{
- u32 prstcfg;
- u8 i;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
-
- for (i = 0; i < 2; i++) {
- if (mode & (1<<i))
- set_bit(2*bit+i, &prstcfg);
- else
- clear_bit(2*bit+i, &prstcfg);
- }
-
- out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
-}
-
#define NUM_SRDS_BANKS 2
#define PHY_RST 15
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index b6ba672..0267596 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -5,6 +5,16 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+/* QRIO GPIO ports */
+#define GPIO_A 0x40
+#define GPIO_B 0x60
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr);
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val);
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
+
#define PRSTCFG_POWUP_UNIT_CORE_RST 0x0
#define PRSTCFG_POWUP_UNIT_RST 0x1
#define PRSTCFG_POWUP_RST 0x3
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
new file mode 100644
index 0000000..e6b3521
--- /dev/null
+++ b/board/keymile/kmp204x/qrio.c
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp at keymile.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include "../common/common.h"
+#include "kmp204x.h"
+
+/* QRIO GPIO register offsets */
+#define DIRECT_OFF 0x18
+#define GPRT_OFF 0x1c
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr)
+{
+ u32 gprt;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+
+ return (gprt >> gpio_nr) & 1U;
+}
+
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value)
+{
+ u32 gprt, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+ if (value)
+ gprt |= mask;
+ else
+ gprt &= ~mask;
+
+ out_be32(qrio_base + port_off + GPRT_OFF, gprt);
+}
+
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ direct |= mask;
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+
+ qrio_set_gpio(port_off, gpio_nr, value);
+}
+
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ direct &= ~mask;
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ if (val == 0)
+ /* set to output -> GPIO drives low */
+ direct |= mask;
+ else
+ /* set to input -> GPIO floating */
+ direct &= ~mask;
+
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+#define WDMASK_OFF 0x16
+
+static void qrio_wdmask(u8 bit, bool wden)
+{
+ u16 wdmask;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ wdmask = in_be16(qrio_base + WDMASK_OFF);
+
+ if (wden)
+ wdmask |= (1 << bit);
+ else
+ wdmask &= ~(1 << bit);
+
+ out_be16(qrio_base + WDMASK_OFF, wdmask);
+}
+
+#define PRST_OFF 0x1a
+
+void qrio_prst(u8 bit, bool en, bool wden)
+{
+ u16 prst;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ qrio_wdmask(bit, wden);
+
+ prst = in_be16(qrio_base + PRST_OFF);
+
+ if (en)
+ prst &= ~(1 << bit);
+ else
+ prst |= (1 << bit);
+
+ out_be16(qrio_base + PRST_OFF, prst);
+}
+
+#define PRSTCFG_OFF 0x1c
+
+void qrio_prstcfg(u8 bit, u8 mode)
+{
+ u32 prstcfg;
+ u8 i;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
+
+ for (i = 0; i < 2; i++) {
+ if (mode & (1<<i))
+ set_bit(2*bit+i, &prstcfg);
+ else
+ clear_bit(2*bit+i, &prstcfg);
+ }
+
+ out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
+}
+
--
1.8.0.1
More information about the U-Boot
mailing list