[U-Boot] [PATCH v3 0/2] Initial support for the silica pengwyn board

[Lothar Felten]

This patch add support for the Silica Pengwyn board [1]
The board is basen on a TI AM3354 CPU [2]
All jumpers removed it will boot from the SDcard, the console is on
UART1 accessible via the FDTI -> USB. The on board NAND chip is
supported and can act as boot medium, depending on jumper settings.
USB Host, USB Device and Ethernet are also provided but untested.

[1]
http://www.silica.com/product/silica-pengwyn-board.html
[2]
http://www.ti.com/product/am3354

Lothar Felten (2):
  initial support for pengwyn board
  cosmetics: braces, comment and whitespace formatting    
    Signed-off-by: Lothar Felten <lothar.felten at gmail.com>

 arch/arm/include/asm/arch-am33xx/ddr_defs.h |   16 ++
 board/silica/pengwyn/Makefile               |   13 ++
 board/silica/pengwyn/board.c                |  216 +++++++++++++++++++++
 board/silica/pengwyn/board.h                |   15 ++
 board/silica/pengwyn/mux.c                  |  107 +++++++++++
 boards.cfg                                  |    1 +
 include/configs/pengwyn.h                   |  272 +++++++++++++++++++++++++++
 7 files changed, 640 insertions(+)
 create mode 100644 board/silica/pengwyn/Makefile
 create mode 100644 board/silica/pengwyn/board.c
 create mode 100644 board/silica/pengwyn/board.h
 create mode 100644 board/silica/pengwyn/mux.c
 create mode 100644 include/configs/pengwyn.h

-- 
1.7.9.5