[U-Boot] [PATCH] sf: params: Removed flag SECT_4K for Micron N25Q128

[Jagan Teki]

On Wed, Jan 8, 2014 at 11:27 AM, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Remove the flag SECT_4K for device N25Q128 as the 4K-byte
> sub sector erase granularity is available only for top/bottom
> 8 sectors in some of the N25Q128 chips.
>
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> ---
>  drivers/mtd/spi/sf_params.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
> index 4cdb4c2..daf8fe7 100644
> --- a/drivers/mtd/spi/sf_params.c
> +++ b/drivers/mtd/spi/sf_params.c
> @@ -73,8 +73,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
>         {"N25Q32A",        0x20bb16, 0x0,       64 * 1024,    64, RD_FULL,         WR_QPP | SECT_4K},
>         {"N25Q64",         0x20ba17, 0x0,       64 * 1024,   128, RD_FULL,         WR_QPP | SECT_4K},
>         {"N25Q64A",        0x20bb17, 0x0,       64 * 1024,   128, RD_FULL,         WR_QPP | SECT_4K},
> -       {"N25Q128",        0x20ba18, 0x0,       64 * 1024,   256, RD_FULL,         WR_QPP | SECT_4K},
> -       {"N25Q128A",       0x20bb18, 0x0,       64 * 1024,   256, RD_FULL,         WR_QPP | SECT_4K},
> +       {"N25Q128",        0x20ba18, 0x0,       64 * 1024,   256, RD_FULL,                   WR_QPP},
> +       {"N25Q128A",       0x20bb18, 0x0,       64 * 1024,   256, RD_FULL,                   WR_QPP},
>         {"N25Q256",        0x20ba19, 0x0,       64 * 1024,   512, RD_FULL,         WR_QPP | SECT_4K},
>         {"N25Q256A",       0x20bb19, 0x0,       64 * 1024,   512, RD_FULL,         WR_QPP | SECT_4K},
>         {"N25Q512",        0x20ba20, 0x0,       64 * 1024,  1024, RD_FULL, WR_QPP | E_FSR | SECT_4K},
> --
> 1.7.4

Applied to u-boot-spi/master

-- 
Thanks,
Jagan.