[U-Boot] [PATCH V3 04/14] ARM: tegra: enable PLLX only once it's been fully configured

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

This programming sequence is correct per Jimmy Zhang, and makes sense
too!

Signed-off-by: Stephen Warren <swarren at nvidia.com>
Tested-by: Thierry Reding <treding at nvidia.com>
---
v2: New patch, split out from the later Tegra124 changes.
---
 arch/arm/cpu/arm720t/tegra-common/cpu.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c
index 03f67b163cc5..322ce10d6fe3 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c
@@ -144,18 +144,23 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
 		reg |= (1 << PLL_DCCON_SHIFT);
 	writel(reg, &pll->pll_misc);
 
-	/* Enable PLLX */
-	reg = readl(&pll->pll_base);
-	reg |= PLL_ENABLE_MASK;
-
 	/* Disable BYPASS */
+	reg = readl(&pll->pll_base);
 	reg &= ~PLL_BYPASS_MASK;
 	writel(reg, &pll->pll_base);
+	debug("pllx_set_rate: base = 0x%08X\n", reg);
 
 	/* Set lock_enable to PLLX_MISC */
 	reg = readl(&pll->pll_misc);
 	reg |= PLL_LOCK_ENABLE_MASK;
 	writel(reg, &pll->pll_misc);
+	debug("pllx_set_rate: misc = 0x%08X\n", reg);
+
+	/* Enable PLLX last, once it's all configured */
+	reg = readl(&pll->pll_base);
+	reg |= PLL_ENABLE_MASK;
+	writel(reg, &pll->pll_base);
+	debug("pllx_set_rate: base final = 0x%08X\n", reg);
 
 	return 0;
 }
-- 
1.8.1.5