[U-Boot] [PATCH 2/3 V2] esdhc: Detecting 8 bit width before mmc initialization

Pantelis Antoniou panto at antoniou-consulting.com
Thu Jan 9 11:43:49 CET 2014


Hi Haijun,

On Dec 11, 2013, at 7:35 AM, Haijun Zhang wrote:

> The upper 4 data signals of esdhc are shared with spi flash.
> So detect if the upper 4 pins are assigned to esdhc before
> enable sdhc 8 bit width.
> 
> Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
> ---
> changs for V2:
> 	- No changes
> 
> drivers/mmc/fsl_esdhc.c    | 5 +++++
> include/configs/T4240QDS.h | 1 +
> 2 files changed, 6 insertions(+)
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index b3b5f37..a5fee3c 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -646,6 +646,11 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
> 			mmc->host_caps &= ~MMC_MODE_4BIT;
> 	}
> 
> +	/* Detect if the upper 4 pins are used for ESDHC */
> +#if defined(CONFIG_T4240QDS)
> +	if (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
> +		mmc->host_caps &= ~MMC_MODE_8BIT;
> +#endif

Same comment applies as for the card detect quirk,

#define CONFIG_ESDHC_DETECT_8_BIT_QUIRK etc.

> 	if (caps & ESDHC_HOSTCAPBLT_HSS)
> 		mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
> 
> diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
> index 955e6b9..4799d38 100644
> --- a/include/configs/T4240QDS.h
> +++ b/include/configs/T4240QDS.h
> @@ -167,6 +167,7 @@ unsigned long get_board_ddr_clk(void);
> #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
> #define QIXIS_BRDCFG5			0x55
> #define QIXIS_MUX_SDHC			2
> +#define QIXIS_MUX_SDHC_WIDTH8		1
> #define QIXIS_BASE_PHYS		(0xf00000000ull | QIXIS_BASE)
> 
> #define CONFIG_SYS_CSPR3_EXT	(0xf)
> -- 
> 1.8.4.1
> 
> 

Regards

-- Pantelis



More information about the U-Boot mailing list