[U-Boot] [PATCH 2/3] net: sh-eth: Fix coding style
Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj at renesas.com
Wed Jan 22 23:52:19 CET 2014
This fixes checkpatch's warning.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
---
drivers/net/sh_eth.c | 35 ++++++++++++++++++-----------------
drivers/net/sh_eth.h | 9 ++++-----
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 0cb963f..81e8ddb 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -67,7 +67,8 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len)
/* packet must be a 4 byte boundary */
if ((int)packet & 3) {
- printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n", __func__);
+ printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n"
+ , __func__);
ret = -EFAULT;
goto err;
}
@@ -156,7 +157,7 @@ static int sh_eth_reset(struct sh_eth_dev *eth)
/* Perform a software reset and wait for it to complete */
sh_eth_write(eth, EDMR_SRST, EDMR);
- for (i = 0; i < TIMEOUT_CNT ; i++) {
+ for (i = 0; i < TIMEOUT_CNT; i++) {
if (!(sh_eth_read(eth, EDMR) & EDMR_SRST))
break;
udelay(1000);
@@ -523,41 +524,41 @@ void sh_eth_halt(struct eth_device *dev)
int sh_eth_initialize(bd_t *bd)
{
- int ret = 0;
+ int ret = 0;
struct sh_eth_dev *eth = NULL;
- struct eth_device *dev = NULL;
+ struct eth_device *dev = NULL;
- eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
+ eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
if (!eth) {
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
ret = -ENOMEM;
goto err;
}
- dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
if (!dev) {
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
ret = -ENOMEM;
goto err;
}
- memset(dev, 0, sizeof(struct eth_device));
- memset(eth, 0, sizeof(struct sh_eth_dev));
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(eth, 0, sizeof(struct sh_eth_dev));
eth->port = CONFIG_SH_ETHER_USE_PORT;
eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
- dev->priv = (void *)eth;
- dev->iobase = 0;
- dev->init = sh_eth_init;
- dev->halt = sh_eth_halt;
- dev->send = sh_eth_send;
- dev->recv = sh_eth_recv;
- eth->port_info[eth->port].dev = dev;
+ dev->priv = (void *)eth;
+ dev->iobase = 0;
+ dev->init = sh_eth_init;
+ dev->halt = sh_eth_halt;
+ dev->send = sh_eth_send;
+ dev->recv = sh_eth_recv;
+ eth->port_info[eth->port].dev = dev;
sprintf(dev->name, SHETHER_NAME);
- /* Register Device to EtherNet subsystem */
- eth_register(dev);
+ /* Register Device to EtherNet subsystem */
+ eth_register(dev);
bb_miiphy_buses[0].priv = eth;
miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 0925759..2909659 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -452,7 +452,6 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
/* EESR */
enum EESR_BIT {
-
#if defined(SH_ETH_TYPE_ETHER)
EESR_TWB = 0x40000000,
#else
@@ -560,8 +559,8 @@ enum RECV_RST_BIT { RMCR_RST = 0x01, };
/* ECMR */
enum FELIC_MODE_BIT {
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
- ECMR_TRCCM=0x04000000, ECMR_RCSC= 0x00800000, ECMR_DPAD= 0x00200000,
- ECMR_RZPF = 0x00100000,
+ ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
+ ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
#endif
ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
@@ -577,8 +576,8 @@ enum FELIC_MODE_BIT {
};
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
-#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | ECMR_RXF | \
- ECMR_TXF | ECMR_MCT)
+#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF | ECMR_PFR | \
+ ECMR_RXF | ECMR_TXF | ECMR_MCT)
#elif defined(SH_ETH_TYPE_ETHER)
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
#else
--
1.8.5
More information about the U-Boot
mailing list