[U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()

[Fabio Estevam]

Hi Stefano,

On Fri, Jan 3, 2014 at 3:55 PM, Fabio Estevam <festevam at gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> Provide an argument to enable_fec_anatop_clock() to specify the clock frequency
> that will be generated.
>
> No changes are made to mx6slevk, which uses the default 50MHz fec clock.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Stefano,
>
> I don't have access to a mx6slevk board at the moment, but will test it on
> Monday. Wanted to submit it so that people could provide some feedback on the
> series.
>
> mx6slevk is using the default clock of 50MHz, so I kept it unchanged.

Just tested on a mx6slevk and confirmed that FEC is functional after this patch.

Regards,

Fabio Estevam