[U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()

[Stefano Babic]

Hi Fabio,

On 06/01/2014 14:12, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Fri, Jan 3, 2014 at 3:55 PM, Fabio Estevam <festevam at gmail.com> wrote:
>> From: Fabio Estevam <fabio.estevam at freescale.com>
>>
>> Provide an argument to enable_fec_anatop_clock() to specify the clock frequency
>> that will be generated.
>>
>> No changes are made to mx6slevk, which uses the default 50MHz fec clock.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>> ---
>> Stefano,
>>
>> I don't have access to a mx6slevk board at the moment, but will test it on
>> Monday. Wanted to submit it so that people could provide some feedback on the
>> series.
>>
>> mx6slevk is using the default clock of 50MHz, so I kept it unchanged.
> 
> Just tested on a mx6slevk and confirmed that FEC is functional after this patch.
> 

Thanks for testing - patch is ok for me.

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================