[U-Boot] [PATCH 4/6] usb:udc:samsung: Zero copy approach for data passed to Samsung's UDC driver
Lukasz Majewski
l.majewski at samsung.com
Fri Jan 31 13:16:27 CET 2014
The Samsung's UDC driver is not anymore copying data from USB requests to
data aligned internal buffers. Now it works directly in data allocated in
the upper layers like UMS, DFU, THOR.
This change is possible since those gadgets now take care to allocate
buffers aligned to cache line (CONFIG_SYS_CACHELINE_SIZE ).
Previously the UDC needed to copy this data to internal aligned buffer to
prevent from unaligned access exceptions.
Test condition
- test HW + measurement: Trats - Exynos4210 rev.1
- test HW Trats2 - Exynos4412 rev.1
400 MiB compressed rootfs image download with `thor 0 mmc 0`
Measurement:
Transmission speed: 27.04 MiB/s
Change-Id: I1df1fbafc72ec703f0367ddee3fedf3a3f5523ed
Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
Cc: Marek Vasut <marex at denx.de>
---
drivers/usb/gadget/s3c_udc_otg.c | 19 +++++-----
drivers/usb/gadget/s3c_udc_otg_xfer_dma.c | 54 ++++++++++++-----------------
include/usb/s3c_udc.h | 5 +--
3 files changed, 32 insertions(+), 46 deletions(-)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index ba17a04..63d4487 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -843,7 +843,7 @@ static struct s3c_udc memory = {
int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
{
struct s3c_udc *dev = &memory;
- int retval = 0, i;
+ int retval = 0;
debug("%s: %p\n", __func__, pdata);
@@ -864,16 +864,15 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
the_controller = dev;
- for (i = 0; i < S3C_MAX_ENDPOINTS+1; i++) {
- dev->dma_buf[i] = memalign(CONFIG_SYS_CACHELINE_SIZE,
- DMA_BUFFER_SIZE);
- dev->dma_addr[i] = (dma_addr_t) dev->dma_buf[i];
- invalidate_dcache_range((unsigned long) dev->dma_buf[i],
- (unsigned long) (dev->dma_buf[i]
- + DMA_BUFFER_SIZE));
+ usb_ctrl = memalign(CONFIG_SYS_CACHELINE_SIZE,
+ ROUND(sizeof(struct usb_ctrlrequest),
+ CONFIG_SYS_CACHELINE_SIZE));
+ if (!usb_ctrl) {
+ error("No memory available for UDC!\n");
+ return -ENOMEM;
}
- usb_ctrl = dev->dma_buf[0];
- usb_ctrl_dma_addr = dev->dma_addr[0];
+
+ usb_ctrl_dma_addr = (dma_addr_t) usb_ctrl;
udc_reinit(dev);
diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
index 274b68c..3f9febc 100644
--- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
@@ -75,8 +75,9 @@ static inline void s3c_ep0_complete_out(void)
"%s : Prepare Complete Out packet.\n", __func__);
invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr,
- (unsigned long) usb_ctrl_dma_addr
- + DMA_BUFFER_SIZE);
+ (unsigned long) usb_ctrl_dma_addr +
+ ROUND(sizeof(struct usb_ctrlrequest),
+ CONFIG_SYS_CACHELINE_SIZE));
writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest),
®->out_endp[EP0_CON].doeptsiz);
@@ -114,8 +115,7 @@ static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req)
ctrl = readl(®->out_endp[ep_num].doepctl);
- writel(the_controller->dma_addr[ep_index(ep)+1],
- ®->out_endp[ep_num].doepdma);
+ writel((unsigned int) ep->dma_buf, ®->out_endp[ep_num].doepdma);
writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length),
®->out_endp[ep_num].doeptsiz);
writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->out_endp[ep_num].doepctl);
@@ -138,7 +138,6 @@ int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
u32 *buf, ctrl = 0;
u32 length, pktcnt;
u32 ep_num = ep_index(ep);
- u32 *p = the_controller->dma_buf[ep_index(ep)+1];
buf = req->req.buf + req->req.actual;
length = req->req.length - req->req.actual;
@@ -148,10 +147,10 @@ int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
ep->len = length;
ep->dma_buf = buf;
- memcpy(p, ep->dma_buf, length);
- flush_dcache_range((unsigned long) p ,
- (unsigned long) p + DMA_BUFFER_SIZE);
+ flush_dcache_range((unsigned long) ep->dma_buf,
+ (unsigned long) ep->dma_buf +
+ ROUND(ep->len, CONFIG_SYS_CACHELINE_SIZE));
if (length == 0)
pktcnt = 1;
@@ -164,8 +163,7 @@ int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
while (readl(®->grstctl) & TX_FIFO_FLUSH)
;
- writel(the_controller->dma_addr[ep_index(ep)+1],
- ®->in_endp[ep_num].diepdma);
+ writel((unsigned long) ep->dma_buf, ®->in_endp[ep_num].diepdma);
writel(DIEPT_SIZ_PKT_CNT(pktcnt) | DIEPT_SIZ_XFER_SIZE(length),
®->in_endp[ep_num].dieptsiz);
@@ -198,7 +196,6 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
struct s3c_ep *ep = &dev->ep[ep_num];
struct s3c_request *req = NULL;
u32 ep_tsr = 0, xfer_size = 0, is_short = 0;
- u32 *p = the_controller->dma_buf[ep_index(ep)+1];
if (list_empty(&ep->queue)) {
debug_cond(DEBUG_OUT_EP != 0,
@@ -218,10 +215,9 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
xfer_size = ep->len - xfer_size;
- invalidate_dcache_range((unsigned long) p,
- (unsigned long) p + DMA_BUFFER_SIZE);
-
- memcpy(ep->dma_buf, p, ep->len);
+ invalidate_dcache_range((unsigned long) ep->dma_buf,
+ (unsigned long) ep->dma_buf +
+ ROUND(xfer_size, CONFIG_SYS_CACHELINE_SIZE));
req->req.actual += min(xfer_size, req->req.length - req->req.actual);
is_short = (xfer_size < ep->ep.maxpacket);
@@ -715,19 +711,14 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max)
{
- u32 bytes;
-
- bytes = sizeof(struct usb_ctrlrequest);
-
- invalidate_dcache_range((unsigned long) ep->dev->dma_buf[ep_index(ep)],
- (unsigned long) ep->dev->dma_buf[ep_index(ep)]
- + DMA_BUFFER_SIZE);
+ invalidate_dcache_range((unsigned long)cp, (unsigned long)cp +
+ ROUND(max, CONFIG_SYS_CACHELINE_SIZE));
debug_cond(DEBUG_EP0 != 0,
- "%s: bytes=%d, ep_index=%d %p\n", __func__,
- bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
+ "%s: bytes=%d, ep_index=%d 0x%p\n", __func__,
+ max, ep_index(ep), cp);
- return bytes;
+ return max;
}
/**
@@ -859,14 +850,12 @@ static int s3c_ep0_write(struct s3c_udc *dev)
return 1;
}
-u16 g_status;
-
int s3c_udc_get_status(struct s3c_udc *dev,
struct usb_ctrlrequest *crq)
{
u8 ep_num = crq->wIndex & 0x7F;
+ u16 g_status = 0;
u32 ep_ctrl;
- u32 *p = the_controller->dma_buf[1];
debug_cond(DEBUG_SETUP != 0,
"%s: *** USB_REQ_GET_STATUS\n", __func__);
@@ -904,12 +893,13 @@ int s3c_udc_get_status(struct s3c_udc *dev,
return 1;
}
- memcpy(p, &g_status, sizeof(g_status));
+ memcpy(usb_ctrl, &g_status, sizeof(g_status));
- flush_dcache_range((unsigned long) p,
- (unsigned long) p + DMA_BUFFER_SIZE);
+ flush_dcache_range((unsigned long) usb_ctrl,
+ (unsigned long) usb_ctrl +
+ ROUND(sizeof(g_status), CONFIG_SYS_CACHELINE_SIZE));
- writel(the_controller->dma_addr[1], ®->in_endp[EP0_CON].diepdma);
+ writel(usb_ctrl_dma_addr, ®->in_endp[EP0_CON].diepdma);
writel(DIEPT_SIZ_PKT_CNT(1) | DIEPT_SIZ_XFER_SIZE(2),
®->in_endp[EP0_CON].dieptsiz);
diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
index 734c6cd..6dead2f 100644
--- a/include/usb/s3c_udc.h
+++ b/include/usb/s3c_udc.h
@@ -19,7 +19,7 @@
/*-------------------------------------------------------------------------*/
/* DMA bounce buffer size, 16K is enough even for mass storage */
-#define DMA_BUFFER_SIZE (4096*4)
+#define DMA_BUFFER_SIZE (16*SZ_1K)
#define EP0_FIFO_SIZE 64
#define EP_FIFO_SIZE 512
@@ -81,9 +81,6 @@ struct s3c_udc {
struct s3c_plat_otg_data *pdata;
- void *dma_buf[S3C_MAX_ENDPOINTS+1];
- dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1];
-
int ep0state;
struct s3c_ep ep[S3C_MAX_ENDPOINTS];
--
1.7.10.4
More information about the U-Boot
mailing list