[U-Boot] [PATCH v6 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL

[York Sun]

On 01/10/2014 11:03 AM, Scott Wood wrote:
> On Fri, 2014-01-10 at 10:10 +0800, Po Liu wrote:
>> Using the TPL method for nand boot by sram was already
>> supported. Here add some code for mpc85xx ifc nand boot.
>>
>> 	- For ifc, elbc, esdhc, espi, all need the SPL without
>> 	section .resetvec.
>> 	- Use a clear function name for nand spl boot.
>> 	- Add CONFIG_SPL_DRIVERS_MISC_SUPPORT to compile the fsl_ifc.c
>> 	in spl/Makefile;
>>
>> Signed-off-by: Po Liu <Po.Liu at freescale.com>
>> ---
>> changes for v2:
>> 	- seperate public code and c29xpcie board code
>> 	- add ifc support
>> changes for v3:
>> 	- remove the redundant plus
>> 	- ifc support use CONFIG_SPL_DRIVERS_MISC_SUPPORT
>> changes for v4:
>> 	- modify the nand_load function
>> 	- add comments in README.SPL
>> changes for v5:
>> 	-none
>> changes for v6:
>> 	- modify the readme file for the include lib file
>>
>>  arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 15 ++++++++-------
>>  doc/README.SPL                          |  1 +
>>  drivers/mtd/nand/fsl_ifc_spl.c          | 31 ++++++++++++++++++++++++-------
>>  spl/Makefile                            |  1 +
>>  4 files changed, 34 insertions(+), 14 deletions(-)
> 
> Acked-by: Scott Wood <scottwood at freescale.com>
> 

Applied to u-boot-mpc85xx master branch. Awaiting upstream.

York