[U-Boot] [PATCH v6 11/12] sf: Divide flash register ops from QEB code

Sourav Poddar sourav.poddar at ti.com
Mon Jan 6 08:09:02 CET 2014


On Saturday 04 January 2014 08:34 PM, Jagannadha Sutradharudu Teki wrote:
> QEB code comprises of couple of flash register read/write operations,
> this patch moved flash register operations on to sf_op
>
> Signed-off-by: Jagannadha Sutradharudu Teki<jaganna at xilinx.com>
> ---
>   drivers/mtd/spi/sf_internal.h | 11 ++++---
>   drivers/mtd/spi/sf_ops.c      | 75 +++++++++++++++----------------------------
>   drivers/mtd/spi/sf_probe.c    | 44 +++++++++++++++++++++++++
>   3 files changed, 77 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
> index c69b53d..c77961f 100644
> --- a/drivers/mtd/spi/sf_internal.h
> +++ b/drivers/mtd/spi/sf_internal.h
> @@ -101,14 +101,17 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
>   /* Flash erase(sectors) operation, support all possible erase commands */
>   int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
>
> +/* Read the status register */
> +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs);
> +
>   /* Program the status register */
>   int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
>
> -/* Set quad enbale bit for macronix flashes */
> -int spi_flash_set_qeb_mxic(struct spi_flash *flash);
> +/* Read the config register */
> +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc);
>
> -/* Set quad enbale bit for winbond and spansion flashes */
> -int spi_flash_set_qeb_winspan(struct spi_flash *flash);
> +/* Program the config register */
> +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);
>
>   /* Enable writing on the SPI flash */
>   static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
> diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
> index 9681042..658294c 100644
> --- a/drivers/mtd/spi/sf_ops.c
> +++ b/drivers/mtd/spi/sf_ops.c
> @@ -24,94 +24,71 @@ static void spi_flash_addr(u32 addr, u8 *cmd)
>   	cmd[3] = addr>>  0;
>   }
>
> -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
> +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs)
>   {
> -	u8 cmd;
>   	int ret;
> +	u8 cmd;
>
> -	cmd = CMD_WRITE_STATUS;
> -	ret = spi_flash_write_common(flash,&cmd, 1,&sr, 1);
> +	cmd = CMD_READ_STATUS;
> +	ret = spi_flash_read_common(flash,&cmd, 1, rs, 1);
>   	if (ret<  0) {
> -		debug("SF: fail to write status register\n");
> +		debug("SF: fail to read status register\n");
>   		return ret;
>   	}
>
>   	return 0;
>   }
>
> -#ifdef CONFIG_SPI_FLASH_MACRONIX
> -int spi_flash_set_qeb_mxic(struct spi_flash *flash)
> +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
>   {
> -	u8 qeb_status;
>   	u8 cmd;
>   	int ret;
>
> -	cmd = CMD_READ_STATUS;
> -	ret = spi_flash_read_common(flash,&cmd, 1,&qeb_status, 1);
> +	cmd = CMD_WRITE_STATUS;
> +	ret = spi_flash_write_common(flash,&cmd, 1,&sr, 1);
>   	if (ret<  0) {
> -		debug("SF: fail to read status register\n");
> +		debug("SF: fail to write status register\n");
>   		return ret;
>   	}
>
> -	if (qeb_status&  STATUS_QEB_MXIC) {
> -		debug("SF: Quad enable bit is already set\n");
> -	} else {
> -		ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
> -		if (ret<  0)
> -			return ret;
> -	}
> -
> -	return ret;
> +	return 0;
>   }
> -#endif
>
>   #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
> -static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr)
> +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc)
>   {
> -	u8 data[2];
> -	u8 cmd;
>   	int ret;
> +	u8 cmd;
>
> -	cmd = CMD_READ_STATUS;
> -	ret = spi_flash_read_common(flash,&cmd, 1,&data[0], 1);
> +	cmd = CMD_READ_CONFIG;
> +	ret = spi_flash_read_common(flash,&cmd, 1, rc, 1);
>   	if (ret<  0) {
> -		debug("SF: fail to read status register\n");
> -		return ret;
> -	}
> -
> -	cmd = CMD_WRITE_STATUS;
> -	data[1] = cr;
> -	ret = spi_flash_write_common(flash,&cmd, 1,&data, 2);
> -	if (ret) {
> -		debug("SF: fail to write config register\n");
> +		debug("SF: fail to read config register\n");
>   		return ret;
>   	}
>
>   	return 0;
>   }
>
> -int spi_flash_set_qeb_winspan(struct spi_flash *flash)
> +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
>   {
> -	u8 qeb_status;
> +	u8 data[2];
>   	u8 cmd;
>   	int ret;
>
> -	cmd = CMD_READ_CONFIG;
> -	ret = spi_flash_read_common(flash,&cmd, 1,&qeb_status, 1);
> -	if (ret<  0) {
> -		debug("SF: fail to read config register\n");
> +	ret = spi_flash_cmd_read_status(flash,&data[0]);
> +	if (ret<  0)
>   		return ret;
> -	}
>
> -	if (qeb_status&  STATUS_QEB_WINSPAN) {
> -		debug("SF: Quad enable bit is already set\n");
> -	} else {
> -		ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
> -		if (ret<  0)
> -			return ret;
> +	cmd = CMD_WRITE_STATUS;
> +	data[1] = wc;
> +	ret = spi_flash_write_common(flash,&cmd, 1,&data, 2);
> +	if (ret) {
> +		debug("SF: fail to write config register\n");
> +		return ret;
>   	}
>
> -	return ret;
> +	return 0;
>   }
>   #endif
>
> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
> index cbde350..8715b7c 100644
> --- a/drivers/mtd/spi/sf_probe.c
> +++ b/drivers/mtd/spi/sf_probe.c
> @@ -28,6 +28,50 @@ static u8 spi_read_cmds_array[] = {
>   	CMD_READ_QUAD_IO_FAST,
>   };
>
> +#ifdef CONFIG_SPI_FLASH_MACRONIX
> +static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
> +{
> +	u8 qeb_status;
> +	int ret;
> +
> +	ret = spi_flash_cmd_read_status(flash,&qeb_status);
> +	if (ret<  0)
> +		return ret;
> +
> +	if (qeb_status&  STATUS_QEB_MXIC) {
> +		debug("SF: mxic: QEB is already set\n");
> +	} else {
> +		ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
> +		if (ret<  0)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +#endif
> +
> +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
> +static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
> +{
> +	u8 qeb_status;
> +	int ret;
> +
> +	ret = spi_flash_cmd_read_config(flash,&qeb_status);
> +	if (ret<  0)
> +		return ret;
> +
> +	if (qeb_status&  STATUS_QEB_WINSPAN) {
> +		debug("SF: winspan: QEB is already set\n");
> +	} else {
> +		ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
> +		if (ret<  0)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +#endif
> +

This looks to be the generic function used to set quad mode for both 
spansion and
winbond flashes? If its the case, function name should be more generic 
and without a
_winbond appended to it. Same goes with the other macros used in the 
function.

>   static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
>   {
>   	switch (idcode0) {



More information about the U-Boot mailing list