[U-Boot] [PATCH 7/9] kmp204x: set CPU watchdog reset reason flag

[Rainer Boschung]

Check the core timer status register (TSR) for watchdog reset,
and and set the QRIO's reset reason flag REASON1[0] accordingly.

This allows the appliction SW to identify the cpu watchdog as a
reset reason, by setting the REASON1[0] flag in the QRIO.

Signed-off-by: Rainer Boschung <rainer.boschung at keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
---
 board/keymile/kmp204x/kmp204x.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 6bc8eb8..225262e 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -80,14 +80,26 @@ int get_scl(void)
 
 #define ZL30158_RST	8
 #define BFTIC4_RST	0
+#define RSTRQSR1_WDT_RR	0x00200000
+#define RSTRQSR1_SW_RR	0x00100000
 
 int board_early_init_f(void)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	bool cpuwd_flag = false;
 
 	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
 	setbits_be32(&gur->ddrclkdr, 0x001f000f);
 
+	/* set reset reason according CPU register */
+	if ((gur->rstrqsr1 & (RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR)) ==
+	    RSTRQSR1_WDT_RR)
+		cpuwd_flag = true;
+
+	qrio_cpuwd_flag(cpuwd_flag);
+	/* clear CPU bits by writing 1 */
+	setbits_be32(&gur->rstrqsr1, RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR);
+
 	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
 	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
 	/* and enable WD on it */
-- 
1.8.0.1