[U-Boot] [PATCH 6/9] kmp204x/qrio: prepare support for the CPU watchdog reset reason
Rainer Boschung
rainer.boschung at keymile.com
Tue Jun 3 09:05:17 CEST 2014
To achieve this, the qrio_cpuwd_flag() function that sets the CPU watchdog
flag in the REASON1 reg is added.
Signed-off-by: Rainer Boschung <rainer.boschung at keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
---
board/keymile/kmp204x/kmp204x.h | 2 ++
board/keymile/kmp204x/qrio.c | 15 +++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index afede99..64c0afb 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -24,5 +24,7 @@ void qrio_wdmask(u8 bit, bool wden);
void qrio_prstcfg(u8 bit, u8 mode);
void qrio_set_leds(void);
void qrio_enable_app_buffer(void);
+void qrio_cpuwd_flag(bool flag);
+int qrio_reset_reason(void);
void pci_of_setup(void *blob, bd_t *bd);
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
index b6ba93a..92e8022 100644
--- a/board/keymile/kmp204x/qrio.c
+++ b/board/keymile/kmp204x/qrio.c
@@ -173,3 +173,18 @@ void qrio_enable_app_buffer(void)
ctrll |= (CTRLL_WRB_BUFENA);
out_8(qrio_base + CTRLL_OFF, ctrll);
}
+
+#define REASON1_OFF 0x12
+#define REASON1_CPUWD 0x01
+
+void qrio_cpuwd_flag(bool flag)
+{
+ u8 reason1;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+ reason1 = in_8(qrio_base + REASON1_OFF);
+ if (flag)
+ reason1 |= REASON1_CPUWD;
+ else
+ reason1 &= ~REASON1_CPUWD;
+ out_8(qrio_base + REASON1_OFF, reason1);
+}
--
1.8.0.1
More information about the U-Boot
mailing list