[U-Boot] Please pull u-boot-ti/master
Tom Rini
trini at ti.com
Fri Jun 6 23:56:51 CEST 2014
Hello,
The following changes since commit cc49da249cf2f380d2fed5571fad65ce6494fc95:
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2014-06-02 08:43:48 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
for you to fetch changes up to 83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2:
arm:am43xx: Add TPS65218 support to scale voltages up (2014-06-06 17:46:16 -0400)
----------------------------------------------------------------
Brian Norris (2):
mtd: nand: don't use read_buf for 8-bit ONFI transfers
mtd: nand: force NAND_CMD_READID onto 8-bit bus
David Mosberger (1):
mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
Hannes Petermaier (6):
arch-am33xx: Add defines for timer0-7
board/BuR/common: introduce usage of CONFIG_SYS_GENERIC_BOARD
board/BuR/tseries: Add support for using 8-bit on eMMC
board/BuR/tseries: only run gpmc_init(...) in NAND-build
board/BuR/common: Add CONFIG_CMD_I2C
board/BuR/tseries: cosmetic changes
Jeroen Hofstee (1):
tam3517: fix NAND detection
Lokesh Vutla (2):
ARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS
ARM: AM43xx: Fix UART clocks enabling
Murali Karicheri (1):
keystone: init: enable UART1 to be able use it from kernel
Sourav Poddar (2):
am43xx_evm: Add qspiboot target
ti: qspi: populate slave device to set flash quad bit.
Tom Rini (6):
arm:am33xx: Make dram_init call sdram_init() in some contexts
arm:am33xx: Rework s_init and add board_early_init_f
am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR
arm:am33xx: Add a scale_vcores() hook
power: Add support for the TPS65218 PMIC
arm:am43xx: Add TPS65218 support to scale voltages up
WingMan Kwok (1):
keystone: k2hk: enable support of nand ecclayout command
pekon gupta (12):
mtd: nand: omap_elm: remove #include omap_gpmc.h
mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16
mtd: nand: omap_elm: use macros for register definitions
mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'
mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info
mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch
mtd: nand: omap: fix error-codes returned from omap-elm driver
mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width
omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT
mtd: nand: omap_gpmc: use macro for register definitions
mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
am335x: update README for BCH16
arch/arm/cpu/armv7/am33xx/board.c | 20 +-
arch/arm/cpu/armv7/am33xx/clock.c | 11 ++
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 9 +
arch/arm/cpu/armv7/am33xx/emif4.c | 4 +
arch/arm/cpu/armv7/keystone/init.c | 9 +
arch/arm/cpu/armv7/omap3/mem.c | 12 --
arch/arm/include/asm/arch-am33xx/clock.h | 1 +
arch/arm/include/asm/arch-am33xx/cpu.h | 35 +++-
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 -
arch/arm/include/asm/arch-keystone/hardware.h | 3 +
arch/arm/include/asm/arch-omap3/mem.h | 8 -
board/BuR/tseries/board.c | 2 +
board/BuR/tseries/mux.c | 9 +-
board/compulab/cm_t35/cm_t35.c | 12 +-
board/ti/am43xx/Makefile | 2 +-
board/ti/am43xx/board.c | 55 +++++-
boards.cfg | 1 +
doc/README.nand | 60 ++++++
drivers/mtd/nand/am335x_spl_bch.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
drivers/mtd/nand/nand_base.c | 11 +-
drivers/mtd/nand/nand_spl_simple.c | 2 +-
drivers/mtd/nand/omap_elm.c | 28 ++-
drivers/mtd/nand/omap_gpmc.c | 193 +++++++++++++-------
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/pmic_tps65218.c | 97 ++++++++++
drivers/spi/ti_qspi.c | 1 +
include/configs/am3517_crane.h | 1 +
include/configs/am43xx_evm.h | 45 ++++-
include/configs/bur_am335x_common.h | 4 +-
include/configs/cm_t335.h | 1 -
include/configs/cm_t35.h | 1 -
include/configs/devkit8000.h | 1 +
include/configs/dig297.h | 1 +
include/configs/k2hk_evm.h | 4 +-
include/configs/omap3_beagle.h | 1 +
include/configs/omap3_evm_common.h | 2 +-
include/configs/omap3_igep00x0.h | 1 +
include/configs/omap3_logic.h | 1 +
include/configs/omap3_overo.h | 1 +
include/configs/omap3_zoom1.h | 1 +
include/configs/pengwyn.h | 1 -
include/configs/tam3517-common.h | 2 +
include/configs/tao3530.h | 2 +-
include/configs/ti_am335x_common.h | 9 +
include/configs/ti_armv7_common.h | 3 +-
include/configs/tseries.h | 1 -
include/linux/mtd/nand.h | 19 ++
include/linux/mtd/omap_elm.h | 11 +-
include/linux/mtd/omap_gpmc.h | 11 +-
include/power/tps65218.h | 63 +++++++
51 files changed, 624 insertions(+), 155 deletions(-)
create mode 100644 drivers/power/pmic/pmic_tps65218.c
create mode 100644 include/power/tps65218.h
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140606/7135b27d/attachment.pgp>
More information about the U-Boot
mailing list