[U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Sun Jun 8 09:45:14 CEST 2014
Hi Tom,
On Fri, 6 Jun 2014 17:56:51 -0400, Tom Rini <trini at ti.com> wrote:
> Hello,
>
> The following changes since commit cc49da249cf2f380d2fed5571fad65ce6494fc95:
>
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2014-06-02 08:43:48 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to 83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2:
>
> arm:am43xx: Add TPS65218 support to scale voltages up (2014-06-06 17:46:16 -0400)
>
> ----------------------------------------------------------------
> Brian Norris (2):
> mtd: nand: don't use read_buf for 8-bit ONFI transfers
> mtd: nand: force NAND_CMD_READID onto 8-bit bus
>
> David Mosberger (1):
> mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
>
> Hannes Petermaier (6):
> arch-am33xx: Add defines for timer0-7
> board/BuR/common: introduce usage of CONFIG_SYS_GENERIC_BOARD
> board/BuR/tseries: Add support for using 8-bit on eMMC
> board/BuR/tseries: only run gpmc_init(...) in NAND-build
> board/BuR/common: Add CONFIG_CMD_I2C
> board/BuR/tseries: cosmetic changes
>
> Jeroen Hofstee (1):
> tam3517: fix NAND detection
>
> Lokesh Vutla (2):
> ARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS
> ARM: AM43xx: Fix UART clocks enabling
>
> Murali Karicheri (1):
> keystone: init: enable UART1 to be able use it from kernel
>
> Sourav Poddar (2):
> am43xx_evm: Add qspiboot target
> ti: qspi: populate slave device to set flash quad bit.
>
> Tom Rini (6):
> arm:am33xx: Make dram_init call sdram_init() in some contexts
> arm:am33xx: Rework s_init and add board_early_init_f
> am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR
> arm:am33xx: Add a scale_vcores() hook
> power: Add support for the TPS65218 PMIC
> arm:am43xx: Add TPS65218 support to scale voltages up
>
> WingMan Kwok (1):
> keystone: k2hk: enable support of nand ecclayout command
>
> pekon gupta (12):
> mtd: nand: omap_elm: remove #include omap_gpmc.h
> mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate between BCH4/BCH8/BCH16
> mtd: nand: omap_elm: use macros for register definitions
> mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'
> mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info
> mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch
> mtd: nand: omap: fix error-codes returned from omap-elm driver
> mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width
> omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT
> mtd: nand: omap_gpmc: use macro for register definitions
> mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
> am335x: update README for BCH16
>
> arch/arm/cpu/armv7/am33xx/board.c | 20 +-
> arch/arm/cpu/armv7/am33xx/clock.c | 11 ++
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 9 +
> arch/arm/cpu/armv7/am33xx/emif4.c | 4 +
> arch/arm/cpu/armv7/keystone/init.c | 9 +
> arch/arm/cpu/armv7/omap3/mem.c | 12 --
> arch/arm/include/asm/arch-am33xx/clock.h | 1 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 35 +++-
> arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 -
> arch/arm/include/asm/arch-keystone/hardware.h | 3 +
> arch/arm/include/asm/arch-omap3/mem.h | 8 -
> board/BuR/tseries/board.c | 2 +
> board/BuR/tseries/mux.c | 9 +-
> board/compulab/cm_t35/cm_t35.c | 12 +-
> board/ti/am43xx/Makefile | 2 +-
> board/ti/am43xx/board.c | 55 +++++-
> boards.cfg | 1 +
> doc/README.nand | 60 ++++++
> drivers/mtd/nand/am335x_spl_bch.c | 2 +-
> drivers/mtd/nand/atmel_nand.c | 2 +-
> drivers/mtd/nand/nand_base.c | 11 +-
> drivers/mtd/nand/nand_spl_simple.c | 2 +-
> drivers/mtd/nand/omap_elm.c | 28 ++-
> drivers/mtd/nand/omap_gpmc.c | 193 +++++++++++++-------
> drivers/power/pmic/Makefile | 1 +
> drivers/power/pmic/pmic_tps65218.c | 97 ++++++++++
> drivers/spi/ti_qspi.c | 1 +
> include/configs/am3517_crane.h | 1 +
> include/configs/am43xx_evm.h | 45 ++++-
> include/configs/bur_am335x_common.h | 4 +-
> include/configs/cm_t335.h | 1 -
> include/configs/cm_t35.h | 1 -
> include/configs/devkit8000.h | 1 +
> include/configs/dig297.h | 1 +
> include/configs/k2hk_evm.h | 4 +-
> include/configs/omap3_beagle.h | 1 +
> include/configs/omap3_evm_common.h | 2 +-
> include/configs/omap3_igep00x0.h | 1 +
> include/configs/omap3_logic.h | 1 +
> include/configs/omap3_overo.h | 1 +
> include/configs/omap3_zoom1.h | 1 +
> include/configs/pengwyn.h | 1 -
> include/configs/tam3517-common.h | 2 +
> include/configs/tao3530.h | 2 +-
> include/configs/ti_am335x_common.h | 9 +
> include/configs/ti_armv7_common.h | 3 +-
> include/configs/tseries.h | 1 -
> include/linux/mtd/nand.h | 19 ++
> include/linux/mtd/omap_elm.h | 11 +-
> include/linux/mtd/omap_gpmc.h | 11 +-
> include/power/tps65218.h | 63 +++++++
> 51 files changed, 624 insertions(+), 155 deletions(-)
> create mode 100644 drivers/power/pmic/pmic_tps65218.c
> create mode 100644 include/power/tps65218.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list