[U-Boot] [PATCH v3 0/5] Fix SPI read and Enable required configs for Exynos5

Akshay Saraswat akshay.s at samsung.com
Mon Jun 9 14:37:42 CEST 2014


Hi Jagan,

>There is v3 for this series - Is that correct or this is the final
>version for this
>series?
>

Yes, v3 is the final version. This is v3.
Please review and let me know your comments.

>On Mon, Jun 9, 2014 at 3:55 PM, Akshay Saraswat <akshay.s at samsung.com> wrote:
>> Hi Minkyu,
>>
>> Please review this patch set.
>>
>>>This patch set intends to -
>>>1. Fix SPI flash reading.
>>>2. Enable saving environment at the end of flash.
>>>3. Increase SPL size.
>>>4. Enable USB booting for all Exynos5 Socs.
>>>
>>>Changes since v2:
>>>        - Added "Acked-by" & "Tested-by".
>>>        - Changed assignment for *rxp in 1/5.
>>>Changes since v1:
>>>        - Added check for step in 1/5.
>>>        - Added new config for SPI flash size in 2/5.
>>>        - Made spl footprint 30 KB instead of 32 in 3/5.
>>>        - Added "Acked-by" in 4/5.
>>>        - Introduced new patch 5/5.
>>>
>>>Akshay Saraswat (4):
>>>  Exynos: SPI: Fix reading data from SPI flash
>>>  Exynos5: Config: Place environment at the end of SPI flash
>>>  Exynos5: Config: Increase SPL footprint for Exynos5420
>>>  Exynos5: Config: Enable USB boot mode for all Exynos5 SoCs
>>>
>>>Michael Pratt (1):
>>>  Exynos: Split 5250 and 5420 memory bank configuration
>>>
>>> drivers/spi/exynos_spi.c        |  5 +++++
>>> include/configs/exynos5-dt.h    | 15 ++++++++++-----
>>> include/configs/exynos5250-dt.h | 13 +++++++------
>>> include/configs/exynos5420.h    |  6 ++++++
>>> 4 files changed, 28 insertions(+), 11 deletions(-)
>
>thanks!
>-- 
>Jagan.
>

Regards,
Akshay Saraswat


More information about the U-Boot mailing list