[U-Boot] [PATCH v3 0/5] Fix SPI read and Enable required configs for Exynos5

[Jagan Teki]

Hi,

On Mon, Jun 9, 2014 at 6:07 PM, Akshay Saraswat <akshay.s at samsung.com> wrote:
> Hi Jagan,
>
>>There is v3 for this series - Is that correct or this is the final
>>version for this
>>series?
>>
>
> Yes, v3 is the final version. This is v3.
> Please review and let me know your comments.

This shows v2 - Can you please resend the series again.

>
>>On Mon, Jun 9, 2014 at 3:55 PM, Akshay Saraswat <akshay.s at samsung.com> wrote:
>>> Hi Minkyu,
>>>
>>> Please review this patch set.
>>>
>>>>This patch set intends to -
>>>>1. Fix SPI flash reading.
>>>>2. Enable saving environment at the end of flash.
>>>>3. Increase SPL size.
>>>>4. Enable USB booting for all Exynos5 Socs.
>>>>
>>>>Changes since v2:
>>>>        - Added "Acked-by" & "Tested-by".
>>>>        - Changed assignment for *rxp in 1/5.
>>>>Changes since v1:
>>>>        - Added check for step in 1/5.
>>>>        - Added new config for SPI flash size in 2/5.
>>>>        - Made spl footprint 30 KB instead of 32 in 3/5.
>>>>        - Added "Acked-by" in 4/5.
>>>>        - Introduced new patch 5/5.
>>>>
>>>>Akshay Saraswat (4):
>>>>  Exynos: SPI: Fix reading data from SPI flash
>>>>  Exynos5: Config: Place environment at the end of SPI flash
>>>>  Exynos5: Config: Increase SPL footprint for Exynos5420
>>>>  Exynos5: Config: Enable USB boot mode for all Exynos5 SoCs
>>>>
>>>>Michael Pratt (1):
>>>>  Exynos: Split 5250 and 5420 memory bank configuration
>>>>
>>>> drivers/spi/exynos_spi.c        |  5 +++++
>>>> include/configs/exynos5-dt.h    | 15 ++++++++++-----
>>>> include/configs/exynos5250-dt.h | 13 +++++++------
>>>> include/configs/exynos5420.h    |  6 ++++++
>>>> 4 files changed, 28 insertions(+), 11 deletions(-)

thanks!
-- 
Jagan.