[U-Boot] [PATCH v6 1/2] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c

Heiko Schocher hs at denx.de
Mon Jun 16 09:58:39 CEST 2014


move fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c
as this function is also used, if CONFIG_OF_CONTROL is not
used. Poped up on the ids8313 board using signed FIT images,
and activating CONFIG_SYS_GENERIC_BOARD. Without this patch
it shows on boot:

No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>

With this patch, it boots again with CONFIG_SYS_GENERIC_BOARD
enabled.

Signed-off-by: Heiko Schocher <hs at denx.de>
Acked-by: Simon Glass <sjg at chromium.org>
Cc: Tom Rini <trini at ti.com>

---
- changes for v2:
  - remove fdtdec_get_int() in lib/fdtdec.c
  - only one fdtdec_get_int() implementation
     Tested on the ids8313 board (on host and target side)
- changes for v3:
  use fdt_getprop() instead fdt_getprop_w() so we avoid a cast
  as Simon suggested.
- changes for v4:
  none
- changes for v5:
  - keep debug for non host side as Simon Glass suggested.
  - add Acked-by from Simon Glass
- changes for v6
  - rebased against commit d8a97f934c64a7ba6f11da5e4cc7f3be57fcb82d
  - compile fdtdec_common.c only if CONFIG_OF_CONTROL or CONFIG_FIT
    is enabled, to prevent link errors when using old compilers
    on sparc, blackfin and nds32 architectures, as Tom Rini suggested
---
 lib/Makefile        |  7 +++++++
 lib/fdtdec.c        | 36 ------------------------------------
 lib/fdtdec_common.c | 38 ++++++++++++++++++++++++++++++++++++++
 tools/Makefile      |  1 +
 4 files changed, 46 insertions(+), 36 deletions(-)
 create mode 100644 lib/fdtdec_common.c

diff --git a/lib/Makefile b/lib/Makefile
index 377ab13..dd87ee2 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -23,6 +23,13 @@ obj-$(CONFIG_USB_TTY) += circbuf.o
 obj-y += crc7.o
 obj-y += crc8.o
 obj-y += crc16.o
+ifdef CONFIG_FIT
+obj-y += fdtdec_common.o
+else
+ifdef CONFIG_OF_CONTROL
+obj-y += fdtdec_common.o
+endif
+endif
 obj-$(CONFIG_OF_CONTROL) += fdtdec.o
 obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
 obj-$(CONFIG_GZIP) += gunzip.o
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 13d3d2f..aaa6620 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -111,24 +111,6 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node,
 	return fdtdec_get_addr_size(blob, node, prop_name, NULL);
 }
 
-s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
-		s32 default_val)
-{
-	const s32 *cell;
-	int len;
-
-	debug("%s: %s: ", __func__, prop_name);
-	cell = fdt_getprop(blob, node, prop_name, &len);
-	if (cell && len >= sizeof(s32)) {
-		s32 val = fdt32_to_cpu(cell[0]);
-
-		debug("%#x (%d)\n", val, val);
-		return val;
-	}
-	debug("(not found)\n");
-	return default_val;
-}
-
 uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
 		uint64_t default_val)
 {
@@ -648,22 +630,4 @@ int fdtdec_read_fmap_entry(const void *blob, int node, const char *name,
 
 	return 0;
 }
-#else
-#include "libfdt.h"
-#include "fdt_support.h"
-
-int fdtdec_get_int(const void *blob, int node, const char *prop_name,
-		int default_val)
-{
-	const int *cell;
-	int len;
-
-	cell = fdt_getprop_w((void *)blob, node, prop_name, &len);
-	if (cell && len >= sizeof(int)) {
-		int val = fdt32_to_cpu(cell[0]);
-
-		return val;
-	}
-	return default_val;
-}
 #endif
diff --git a/lib/fdtdec_common.c b/lib/fdtdec_common.c
new file mode 100644
index 0000000..757931a
--- /dev/null
+++ b/lib/fdtdec_common.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2014
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on lib/fdtdec.c:
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef USE_HOSTCC
+#include <common.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+#else
+#include "libfdt.h"
+#include "fdt_support.h"
+
+#define debug(...)
+#endif
+
+int fdtdec_get_int(const void *blob, int node, const char *prop_name,
+		int default_val)
+{
+	const int *cell;
+	int len;
+
+	debug("%s: %s: ", __func__, prop_name);
+	cell = fdt_getprop(blob, node, prop_name, &len);
+	if (cell && len >= sizeof(int)) {
+		int val = fdt32_to_cpu(cell[0]);
+
+		debug("%#x (%d)\n", val, val);
+		return val;
+	}
+	debug("(not found)\n");
+	return default_val;
+}
diff --git a/tools/Makefile b/tools/Makefile
index 0088c1a..e86a9e9 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -68,6 +68,7 @@ dumpimage-mkimage-objs := aisimage.o \
 			$(FIT_SIG_OBJS-y) \
 			lib/crc32.o \
 			default_image.o \
+			lib/fdtdec_common.o \
 			lib/fdtdec.o \
 			fit_common.o \
 			fit_image.o \
-- 
1.8.3.1



More information about the U-Boot mailing list