[U-Boot] [linux-sunxi] [PATCH v3 0/4] uboot sata support for sunxi platform

[Koen Kooi]

Op 12 mrt. 2014, om 13:56 heeft Ian Campbell <ijc at hellion.org.uk> het volgende geschreven:

> On Wed, 2014-03-12 at 05:43 -0700, Ezaul Zillmer wrote:
> 
> I'm afraid much of your mail was incomprehensible to me.
> 
>> setenv bootargs console = tty0 console = ttyS0, 115200 = hdmi.audio
>> EDID: 0 = disp.screen0_output_mode EDID: 1280x800p60 root = / dev/sda1
>> rootfstype = ext4 rootwait panic = 10 
>> ext4load 0 0x43000000 scsi boot / script.bin 
>> ext4load 0 0x46000000 scsi boot / uImage 
>> ext4load scsi 0 0x49000000 boot/cubie2.dtb 
> 
> The first two and the last one are using a totally different syntax,
> only one of them can be correct, I suggest you check the uboot help/docs
> and experiment by hand on the uboot console before trying to construct a
> boot.scr.

I've noticed 'ext4load' twice today, once in the mail above and once in the 'fedora on panda' blog post. What's stopping people from using the generic 'fsload' commands?

regards,

Koen