[U-Boot] [linux-sunxi] [PATCH v3 0/4] uboot sata support for sunxi platform

[Ian Campbell]

On Wed, 2014-03-12 at 14:17 +0100, Koen Kooi wrote:
> Op 12 mrt. 2014, om 13:56 heeft Ian Campbell <ijc at hellion.org.uk> het volgende geschreven:
> 
> > On Wed, 2014-03-12 at 05:43 -0700, Ezaul Zillmer wrote:
> > 
> > I'm afraid much of your mail was incomprehensible to me.
> > 
> >> setenv bootargs console = tty0 console = ttyS0, 115200 = hdmi.audio
> >> EDID: 0 = disp.screen0_output_mode EDID: 1280x800p60 root = / dev/sda1
> >> rootfstype = ext4 rootwait panic = 10 
> >> ext4load 0 0x43000000 scsi boot / script.bin 
> >> ext4load 0 0x46000000 scsi boot / uImage 
> >> ext4load scsi 0 0x49000000 boot/cubie2.dtb 
> > 
> > The first two and the last one are using a totally different syntax,
> > only one of them can be correct, I suggest you check the uboot help/docs
> > and experiment by hand on the uboot console before trying to construct a
> > boot.scr.
> 
> I've noticed 'ext4load' twice today, once in the mail above and once
> in the 'fedora on panda' blog post. What's stopping people from using
> the generic 'fsload' commands?

Personally because I'd never heard of it ;-)

Ian.