[U-Boot] [linux-sunxi] [PATCH v3 0/4] uboot sata support for sunxi platform

[Ezaul Zillmer]

>
> sun7i# scsi reset
>
> Reset SCSI
> scanning bus for devices...
> timeout exit!
> Found 0 device(s).
>
> this same problem not think that the drive to boot 
>
> Nothing appears scsi info
>
> :( 
> I will try to put another HD
>
> Loading the kernel 
> [3.723244] ata1.00: ATA-8: SAMSUNG HM320II, 2AC101C4, max UDMA/133 
> [3.729646] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) 
> [3.748349] ata1.00: configured for UDMA/133 
> [3.752698] ATA1: EH complete 
> [3.756157] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320II 2AC1 PQ: 0 
> ANSI: 5 
> [3.767627] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 
> GB/298 GiB) 
> [3.787130] sd 0:0:0:0: [sda] Write Protect is off 
> [3.796692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
> does not support DPO or FUA 
> [3.827250] sda: sda1 
> [3.836155] sd 0:0:0:0: [sda] Attached SCSI disk 
> done. 
>
>
> Ezaul Zillmer
>