[U-Boot] Problem building am335x_evm config

[Vasili Galka]

Hi Marek,

I've followed your advice and tried the following two on clean tree:

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm
am335x_evm_config

make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm

Unfortunately, this does not help. I'm still getting the same error.

Best,
Vasili



On Sun, May 4, 2014 at 2:12 PM, Belisko Marek <marek.belisko at gmail.com>wrote:

> Hi Vasisli,
>
> On Sun, May 4, 2014 at 12:56 PM, Vasili Galka <vvv444 at gmail.com> wrote:
> > Hi,
> >
> > I'm having some very basic problem with building u-boot. Using clean
> > v2014.04 checkout, I run config:
> >
> > make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config
> Add to parameters also ARCH=arm
> >
> > Which passes fine. But when I run the actual build after that I'm getting
> > an error:
> >
> > $ make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm
> >   GEN     include/autoconf.mk.dep
> >   GEN     include/autoconf.mk
> > make[1]: *** No rule to make target 'am335x_evm'.  Stop.
> > Makefile:138: recipe for target 'sub-make' failed
> > make: *** [sub-make] Error 2
> >
> > What am I doing wrong?
> >
> > Best regards,
> > Vasili
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> >
>
> BR,
>
> marek
>
> --
> as simple and primitive as possible
> -------------------------------------------------
> Marek Belisko - OPEN-NANDRA
> Freelance Developer
>
> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> Tel: +421 915 052 184
> skype: marekwhite
> twitter: #opennandra
> web: http://open-nandra.com
>