May 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu May 1 00:18:23 CEST 2014
Ending: Sat May 31 22:32:24 CEST 2014
Messages: 2073

• [U-Boot] [PATCH] ARM: tegra: enable USB device mode and UMS on some boards   Stephen Warren
• [U-Boot] [PATCH V2] ARM: tegra: enable USB device mode and UMS on some boards   Stephen Warren
• [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
  • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
    • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   York Sun
      • [U-Boot] [Patch v2 1/2] common/board_f: Preserve global data for mpc85xx and mpc86xx   Scott Wood
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   York Sun
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   Simon Glass
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   York Sun
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   Scott Wood
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   York Sun
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   Scott Wood
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   Simon Glass
      • [U-Boot] [Patch v3 1/2] common/board_f: Preserve early global data   York Sun
      • [U-Boot] [Patch v3 2/2] common/board_f: Fix size variable   York Sun
  • [U-Boot] [PATCH] NAND: Add Micron MT29F16G identifier   smithknown
    • [U-Boot] [PATCH] NAND: Add Micron MT29F16G identifier   Eric Bénard
• [U-Boot] [PATCH] ums: respect CONFIG_USB_CABLE_CHECK   Marek Vasut
  • [U-Boot] [PATCH] ums: respect CONFIG_USB_CABLE_CHECK   Stephen Warren
• [U-Boot] Getting started with SPL   Heshsham Abdul Basit
• [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Stephen Warren
    • [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Marek Vasut
      • [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Stephen Warren
      • [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Stephen Warren
      • [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Marek Vasut
• [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Marek Vasut
  • [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Stephen Warren
    • [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Lukasz Majewski
    • [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Marek Vasut
• [U-Boot] [PATCH 1/8] kmp204x: Add support for the unit LEDs   Valentin Longchamp
  • [U-Boot] [PATCH 1/8] kmp204x: Add support for the unit LEDs   York Sun
    • [U-Boot] [PATCH] cmd_bootm.c: Only say XIP image when load is image_start   Tom Rini
    • [U-Boot] cmd_bootm.c: Only say XIP image when load is image_start   Tom Rini
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Scott Wood
• [U-Boot] [PATCH] Trivial fix to .gitignore for spl/Makefile   Ralph Siemsen
  • [U-Boot] [PATCH] Trivial fix to .gitignore for spl/Makefile   Masahiro Yamada
    • [U-Boot] Trivial fix to .gitignore for spl/Makefile   Tom Rini
• [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Scott Wood
  • [U-Boot] [PATCH 04/11] kconfig: add basic Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH v4 0/9] sunxi: initial upstreamining effort   Ian Campbell
  • [U-Boot] [PATCH v4 1/9] sunxi: add sun7i clocks and timer support.   Ian Campbell
  • [U-Boot] [PATCH v4 1/9] sunxi: add sun7i clocks and timer support.   Marek Vasut
  • [U-Boot] [PATCH v4 1/9] sunxi: add sun7i clocks and timer support.   Ian Campbell
  • [U-Boot] [PATCH v4 1/9] sunxi: add sun7i clocks and timer support.   Ian Campbell
  • [U-Boot] [PATCH v4 1/9] sunxi: add sun7i clocks and timer support.   Ian Campbell
  • [U-Boot] [PATCH v4 2/9] sunxi: add sun7i pinmux and gpio support   Ian Campbell
  • [U-Boot] [PATCH v4 2/9] sunxi: add sun7i pinmux and gpio support   Ian Campbell
  • [U-Boot] [PATCH v4 2/9] sunxi: add sun7i pinmux and gpio support   Ian Campbell
  • [U-Boot] [PATCH v4 2/9] sunxi: add sun7i pinmux and gpio support   Ian Campbell
  • [U-Boot] [PATCH v4 3/9] sunxi: add sun7i dram setup support   Ian Campbell
  • [U-Boot] [PATCH v4 3/9] sunxi: add sun7i dram setup support   Ian Campbell
  • [U-Boot] [PATCH v4 3/9] sunxi: add sun7i dram setup support   Marek Vasut
  • [U-Boot] [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Ian Campbell
  • [U-Boot] [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Marek Vasut
  • [U-Boot] [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Marek Vasut
  • [U-Boot] [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Marc Zyngier
  • [U-Boot] [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Ian Campbell
  • [U-Boot] [linux-sunxi] Re: [PATCH v4 4/9] sunxi: add sun7i cpu, board and start of day support   Marc Zyngier
  • [U-Boot] [PATCH v4 5/9] sunxi: add support for Cubietruck booting in FEL mode   Ian Campbell
  • [U-Boot] [PATCH v4 5/9] sunxi: add support for Cubietruck booting in FEL mode   Marek Vasut
  • [U-Boot] [PATCH v4 6/9] sunxi: add gmac Ethernet support   Ian Campbell
  • [U-Boot] [PATCH v4 6/9] sunxi: add gmac Ethernet support   Ian Campbell
  • [U-Boot] [PATCH v4 6/9] sunxi: add gmac Ethernet support   Marek Vasut
  • [U-Boot] [PATCH v4 7/9] sunxi: mmc support   Ian Campbell
  • [U-Boot] [PATCH v4 7/9] sunxi: mmc support   Ian Campbell
  • [U-Boot] [PATCH v4 7/9] sunxi: mmc support   Marek Vasut
  • [U-Boot] [PATCH v4 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
  • [U-Boot] [PATCH v4 8/9] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
  • [U-Boot] [PATCH v4 8/9] sunxi: non-FEL SPL boot support for sun7i   Marek Vasut
  • [U-Boot] [PATCH v4 9/9] net/designware: Reduce DMA burst length   Ian Campbell
  • [U-Boot] [PATCH v4 9/9] net/designware: Reduce DMA burst length   Ian Campbell
  • [U-Boot] [PATCH v4.1 9/9] net/designware: Make DMA burst length configurable and reduce by default   Ian Campbell
  • [U-Boot] [PATCH v4 0/9] sunxi: initial upstreamining effort   Marek Vasut
    • [U-Boot] [PATCH v4 0/9] sunxi: initial upstreamining effort   Ian Campbell
• [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range   Ian Campbell
  • [PATCH] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
• [U-Boot] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
  • [U-Boot] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Marek Vasut
  • [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Siarhei Siamashka
• [U-Boot] [PATCH 3/8] ums: remove error-checking of MMC device size   Stephen Warren
• [U-Boot] [PATCH v5 06/12] ums: always initialize mmc before ums_disk_init()   Stephen Warren
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
    • [U-Boot] [PATCH] wandboard: add Future Eletronics 7" WVGA LCD extension board   Fabio Estevam
    • [U-Boot] [PATCH] wandboard: add Future Eletronics 7" WVGA LCD extension board   Fabio Estevam
    • [U-Boot] [PATCH] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
  • [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
    • [U-Boot] Pull request: u-boot-sh/master   Tom Rini
    • [U-Boot] [PATCH v2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
    • [U-Boot] [PATCH v2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Fabio Estevam
    • [U-Boot] [PATCH v2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
    • [U-Boot] [PATCH] usb: ums: add error handling for failed registration   Stephen Warren
    • [U-Boot] [PATCH] usb: ums: add error handling for failed registration   Marek Vasut
    • [U-Boot] [PATCH] usb: ums: add error handling for failed registration   Lukasz Majewski
    • [U-Boot] [PATCH] USB: gadget: save driver name before registering it   Stephen Warren
    • [U-Boot] [PATCH] USB: gadget: save driver name before registering it   Lukasz Majewski
• [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Stephen Warren
  • [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Przemyslaw Marczak
    • [U-Boot] [PATCH 7/8] ums: move all variable declarations to the start of the block   Stephen Warren
      • [U-Boot] [PATCH v3 1/2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
      • [U-Boot] [PATCH v3 1/2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Stefano Babic
      • [U-Boot] [PATCH v3 1/2] wandboard: add Future Eletronics 7" WVGA LCD extension board   Stefano Babic
      • [U-Boot] [PATCH v3 2/2] wandboard: Pass video kernel arguments for HDMI and LCD   Otavio Salvador
      • [U-Boot] [PATCH v3 2/2] wandboard: Pass video kernel arguments for HDMI and LCD   Stefano Babic
• [U-Boot] Possible race condition when accessing SPI NOR Flash ?   Wolfgang Denk
  • [U-Boot] Possible race condition when accessing SPI NOR Flash ?   Valentin Longchamp
• [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Scott Wood
  • [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Stephen Warren
    • [U-Boot] [Patch v4 1/2] common/board_f: Initialized global data for generic board   York Sun
    • [U-Boot] [Patch v4 2/2] common/board_f: Fix size variable   York Sun
    • [U-Boot] [Patch v4 1/2] common/board_f: Initialized global data for generic board   Simon Glass
    • [U-Boot] [Patch v4 1/2] common/board_f: Initialized global data for generic board   York Sun
    • [U-Boot] [Patch v4 1/2] common/board_f: Initialized global data for generic board   Scott Wood
• [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Heiko Schocher
  • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Wolfgang Denk
  • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Marek Vasut
    • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Heiko Schocher
      • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Simon Glass
      • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Heiko Schocher
      • [U-Boot] U-Boot, dm, ubi: struct device is declared twice   Simon Glass
  • [U-Boot] U-Boot 1.3.4 ERROR: CTL:TIMEOUT   Medyk, Sergio (NSN - FI/Espoo)
    • [U-Boot] U-Boot 1.3.4 ERROR: CTL:TIMEOUT   Wolfgang Denk
      • [U-Boot] [PATCH v2 1/8] kmp204x: Add support for the unit LEDs   Valentin Longchamp
      • [U-Boot] [PATCH v2 2/8] kmp204x: handle dip-switch for factory settings   Valentin Longchamp
• [U-Boot] Possible race condition when accessing SPI NOR Flash ?   Mark Marshall
  • [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h   Albert ARIBAUD
  • [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt   Albert ARIBAUD
• [U-Boot] [PATCH 0/6] FPGA changes   Michal Simek
  • [U-Boot] [PATCH 1/6] configs: iocom: Fix typo on CMD_FPGA command   Michal Simek
  • [U-Boot] [PATCH 2/6] fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK   Michal Simek
  • [U-Boot] [PATCH 3/6] fpga: Define bitstream type based on command selection   Michal Simek
  • [U-Boot] [PATCH 4/6] fpga: Add support to load partial bitstreams   Michal Simek
  • [U-Boot] [PATCH 5/6] fpga: zynqpl: Clean partial bitstream handling   Michal Simek
  • [U-Boot] [PATCH 6/6] zynq: Enable fpga loadp and loadbp commands   Michal Simek
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Balaji T K
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Balaji T K
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Tom Rini
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Balaji T K
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Tom Rini
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Balaji T K
    • [U-Boot] [PATCH] mmc: omap_hsmmc: add adma support   Tom Rini
• [U-Boot] [RFC PATCH] fpga: Added support to load bit stream from SD/MMC   Michal Simek
  • [U-Boot] [RFC PATCH] fpga: Added support to load bit stream from SD/MMC   Michal Simek
    • [U-Boot] [RFC PATCH] fpga: Added support to load bit stream from SD/MMC   Tom Rini
    • [U-Boot] [RFC PATCH] fpga: Added support to load bit stream from SD/MMC   Michal Simek
  • [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Timur Tabi
  • [U-Boot] [PATCH v4 10/10] ARM: HYP/non-sec/PSCI: emit DT nodes   Jon Loeliger
    • [U-Boot] [PATCH v4 10/10] ARM: HYP/non-sec/PSCI: emit DT nodes   Marc Zyngier
    • [U-Boot] [PATCH 1/2] omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision   robertcnelson
    • [U-Boot] [U-Boot, 1/2] omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision   Tom Rini
    • [U-Boot] [PATCH 2/2] omap3_beagle: xM A/B validate new dtb exits in file system   robertcnelson
    • [U-Boot] [U-Boot, 2/2] omap3_beagle: xM A/B validate new dtb exits in file system   Tom Rini
• [U-Boot] [PATCH 2/2] omap3_beagle: xM A/B validate new dtb exits in file system   Robert Nelson
  • [U-Boot] [PATCH 2/2] omap3_beagle: xM A/B validate new dtb exits in file system   Tom Rini
  • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Jon Loeliger
    • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Jon Loeliger
    • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
    • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Jon Loeliger
    • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
    • [U-Boot] [PATCH v4 06/10] ARM: HYP/non-sec: allow relocation to secure RAM   Jon Loeliger
    • [U-Boot] [PATCH] WIP: tegra: Use driver model for GPIO driver   Simon Glass
    • [U-Boot] [PATCH] WIP: tegra: Use driver model for GPIO driver   Stephen Warren
    • [U-Boot] [PATCH] WIP: tegra: Use driver model for GPIO driver   Simon Glass
    • [U-Boot] [PATCH] WIP: tegra: Use driver model for GPIO driver   Stephen Warren
    • [U-Boot] [PATCH] WIP: tegra: Use driver model for GPIO driver   Simon Glass
• [U-Boot] [PATCH 02/12] SPL: NAND: add support for mxs nand   Scott Wood
  • [U-Boot] [PATCH 02/12] SPL: NAND: add support for mxs nand   Tim Harvey
    • [U-Boot] [Patch v5 1/2] common/board_f: Initialized global data for generic board   York Sun
    • [U-Boot] [Patch v5 2/2] common/board_f: Fix size variable   York Sun
    • [U-Boot] [Patch v5 2/2] common/board_f: Fix size variable   Simon Glass
    • [U-Boot] [U-Boot,v5,2/2] common/board_f: Fix size variable   Tom Rini
    • [U-Boot] [Patch v5 1/2] common/board_f: Initialized global data for generic board   Simon Glass
    • [U-Boot] [U-Boot, v5, 1/2] common/board_f: Initialized global data for generic board   Tom Rini
• [U-Boot] xil_printf in ps7_init.c for u-boot-spl (zynq)   Heshsham Abdul Basit
  • [U-Boot] xil_printf in ps7_init.c for u-boot-spl (zynq)   Michal Simek
• [U-Boot] [PATCH u-boot sunxi 07/12] sunxi: Add i2c support   Hans de Goede
  • [U-Boot] [PATCH 0/2] mvtwsi: misc fixes   Hans de Goede
  • [U-Boot] [PATCH 1/2] mvtwsi: Fix clock programming   Hans de Goede
  • [U-Boot] [PATCH 2/2] mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals   Hans de Goede
• [U-Boot] [PATCH] lcd: Add support for CONFIG_LCD_NOSTDOUT   Jeroen Hofstee
  • [U-Boot] [PATCH] lcd: Add support for CONFIG_LCD_NOSTDOUT   Hannes Petermaier
  • [U-Boot] Problem building am335x_evm config   Vasili Galka
    • [U-Boot] Problem building am335x_evm config   Belisko Marek
      • [U-Boot] Problem building am335x_evm config   Vasili Galka
  • [U-Boot] Problem building am335x_evm config   Belisko Marek
    • [U-Boot] Problem building am335x_evm config   Vasili Galka
      • [U-Boot] Problem building am335x_evm config   Jeroen Hofstee
      • [U-Boot] Problem building am335x_evm config   Vasili Galka
      • [U-Boot] Problem building am335x_evm config   Jonathan Cormier
• [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Jeroen Hofstee
  • [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Xuebing Wang
    • [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Ian Lepore
      • [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Tim Kientzle
      • [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD   Tim Kientzle
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Otavio Salvador
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Stefano Babic
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Tim Harvey
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Stefano Babic
      • [U-Boot] [PATCH] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
• [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Lukasz Majewski
  • [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Simon Glass
    • [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Lukasz Majewski
• [U-Boot] [PATCH 2/2] fs:ext4:write:fix: Reinitialize global variables after updating a file   Lukasz Majewski
  • [U-Boot] [PATCH v2] fsl/pci: Add workaround for erratum A-005434   Chunhe Lan
• [U-Boot] booting signed Images   Heiko Schocher
  • [U-Boot] booting signed Images   Simon Glass
  • [U-Boot] booting signed Images   Wolfgang Denk
  • [U-Boot] booting signed Images   Simon Glass
  • [U-Boot] booting signed Images   Wolfgang Denk
  • [U-Boot] booting signed Images   Heiko Schocher
  • [U-Boot] booting signed Images   Simon Glass
• [U-Boot] [PATCH v5 01/12] mmc: mmc header fix   Lukasz Majewski
• [U-Boot] [PATCH v5 02/12] part: header fix   Lukasz Majewski
• [U-Boot] [PATCH v5 03/12] usb: dfu: fix boards wo USB cable detection   Lukasz Majewski
• [U-Boot] [PATCH v5 04/12] dfu: mmc: raw data write fix   Lukasz Majewski
• [U-Boot] [PATCH v5 05/12] dfu: mmc: change offset base handling   Lukasz Majewski
• [U-Boot] [PATCH v5 06/12] ums: always initialize mmc before ums_disk_init()   Lukasz Majewski
• [U-Boot] [PATCH v5 07/12] am335x: dfu: disable DFU in am335x_evm SPL build   Lukasz Majewski
• [U-Boot] [PATCH v5 08/12] USB: gadget: added a saner gadget downloader registration API   Lukasz Majewski
• [U-Boot] [PATCH v2] common: fixed linker-list example   Lukasz Majewski
• [U-Boot] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] MPC8641 ASMP u-boot booting   Ashish Khetan
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Stefano Babic
• [U-Boot] [PATCH 04/12] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Stefano Babic
• [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Stefano Babic
  • [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Tim Harvey
    • [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Stefano Babic
    • [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Tapani Utriainen
      • [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Stefano Babic
      • [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL   Tim Harvey
• [U-Boot] [PATCH 2/4] video: Add support for imx25 lcd controller   Anatolij Gustschin
  • [U-Boot] [PATCH 2/4] video: Add support for imx25 lcd controller   Stefano Babic
• [U-Boot] [PATCH 4/4] Update of the company logo   Anatolij Gustschin
• [U-Boot] [PATCH] config: enable CMD_BMP when API+LCD is enabled   Anatolij Gustschin
• [U-Boot] [PATCH] at91: video: atmel_hlcdfb.c: fix bad timing configuration   Anatolij Gustschin
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 06/12] IMX: add comments and remove unused struct fields   Stefano Babic
• [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers   Stefano Babic
  • [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers   Tim Harvey
    • [U-Boot] [PATCH v11 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
    • [U-Boot] [PATCH v11 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
    • [U-Boot] [PATCH v11 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Minkyu Kang
    • [U-Boot] [PATCH v11 2/2] S5P: Exynos: Config: Enable GPIO CMD config   Akshay Saraswat
    • [U-Boot] [PATCH v11 0/2] S5P: Exynos: Add GPIO numbering feature   Przemyslaw Marczak
• [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Przemyslaw Marczak
  • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Steve Rae
    • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Steve Rae
      • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Tom Rini
      • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Steve Rae
      • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Tom Rini
      • [U-Boot] [PATCH] disk: part_efi: add support for the Alternate GPT   Steve Rae
• [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Ian Campbell
  • [U-Boot] [PATCH v5 1/8] sunxi: add sun7i clocks and timer support.   Ian Campbell
  • [U-Boot] [PATCH v5 1/8] sunxi: add sun7i clocks and timer support.   Tom Rini
  • [U-Boot] [PATCH v5 2/8] sunxi: add sun7i pinmux and gpio support   Ian Campbell
  • [U-Boot] [PATCH v5 2/8] sunxi: add sun7i pinmux and gpio support   Tom Rini
  • [U-Boot] [PATCH v5 3/8] sunxi: add sun7i dram setup support   Ian Campbell
  • [U-Boot] [PATCH v5 3/8] sunxi: add sun7i dram setup support   Tom Rini
  • [U-Boot] [PATCH v5 4/8] sunxi: add sun7i cpu, board and start of day support   Ian Campbell
  • [U-Boot] [PATCH v5 4/8] sunxi: add sun7i cpu, board and start of day support   Tom Rini
  • [U-Boot] [PATCH v5 5/8] sunxi: add support for Cubietruck booting in FEL mode   Ian Campbell
  • [U-Boot] [PATCH v5 6/8] sunxi: add gmac Ethernet support   Ian Campbell
  • [U-Boot] [PATCH v5 6/8] sunxi: add gmac Ethernet support   Tom Rini
  • [U-Boot] [PATCH v5 7/8] sunxi: mmc support   Ian Campbell
  • [U-Boot] [linux-sunxi] [PATCH v5 7/8] sunxi: mmc support   Stefan Roese
  • [U-Boot] [linux-sunxi] [PATCH v5 7/8] sunxi: mmc support   Ian Campbell
  • [U-Boot] [linux-sunxi] [PATCH v5 7/8] sunxi: mmc support   Tom Rini
  • [U-Boot] [PATCH v5 8/8] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
  • [U-Boot] [PATCH v5 8/8] sunxi: non-FEL SPL boot support for sun7i   Tom Rini
  • [U-Boot] [PATCH v5 8/8] sunxi: non-FEL SPL boot support for sun7i   Ian Campbell
  • [U-Boot] [PATCH v5 8/8] sunxi: non-FEL SPL boot support for sun7i   Tom Rini
  • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Marek Vasut
    • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Albert ARIBAUD
    • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Marek Vasut
    • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Ian Campbell
    • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Maxime Ripard
    • [U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort   Hans de Goede
    • [U-Boot] [PATCH] lib:crc32: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH] lib:crc32: Allow setting of the initial crc32 value   Wolfgang Denk
    • [U-Boot] [PATCH] lib:crc32: Allow setting of the initial crc32 value   Marek Vasut
    • [U-Boot] [PATCH] lib:crc32: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH] lib:crc32: Allow setting of the initial crc32 value   Marek Vasut
    • [U-Boot] [PATCH v2] lib:crc32: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH v2] lib:crc32: Allow setting of the initial crc32 value   Marek Vasut
    • [U-Boot] [PATCH v2] lib:crc32: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH v2] lib:crc32: Allow setting of the initial crc32 value   Wolfgang Denk
    • [U-Boot] [PATCH v2] lib:crc32: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH v3] lib:crc32:hash: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] [PATCH v3] lib:crc32:hash: Allow setting of the initial crc32 value   Simon Glass
    • [U-Boot] [PATCH v3] lib:crc32:hash: Allow setting of the initial crc32 value   Lukasz Majewski
    • [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Tom Rini
      • [U-Boot] [PATCH v2] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v2] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting   Marek Vasut
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Marek Vasut
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Wolfgang Denk
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Wolfgang Denk
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Tom Rini
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Heiko Schocher
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Wolfgang Denk
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Wolfgang Denk
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Heiko Schocher
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v3] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
      • [U-Boot] [PATCH v4] dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting   Lukasz Majewski
• [U-Boot] [PATCH v5 5/5] samsung: misc: remove download mode info screen   Minkyu Kang
  • [U-Boot] [PATCH v5 5/5] samsung: misc: remove download mode info screen   Przemyslaw Marczak
    • [U-Boot] [PATCH v5 5/5] samsung: misc: remove download mode info screen   Minkyu Kang
• [U-Boot] [PATCH v5 4/5] samsung: misc: menu: increase delay in menu main loop   Gerhard Sittig
  • [U-Boot] [PATCH v5 4/5] samsung: misc: menu: increase delay in menu main loop   Przemyslaw Marczak
    • [U-Boot] [UBOOT][PATCH 0/3] am43xx: add xip support for ti qspi   Sourav Poddar
    • [U-Boot] [UBOOT][PATCH 1/3] am33xx: Rework #ifdef's around s_init for clarity   Sourav Poddar
    • [U-Boot] [UBOOT][PATCH 2/3] am43xx_evm: Add qspi and qspiboot targets   Sourav Poddar
    • [U-Boot] [UBOOT][PATCH 3/3] ti: qspi: populate slave device to set flash quad bit.   Sourav Poddar
• [U-Boot] Verified boot and Legacy Kernel Images   Mike Pearce
  • [U-Boot] Verified boot and Legacy Kernel Images   Heiko Schocher
    • [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Jon Loeliger
      • [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Marc Zyngier
      • [U-Boot] [PATCH 0/2] siemens: rename board dxr2 to draco and add target draco   Samuel Egli
      • [U-Boot] [PATCH 1/2] siemens:cosmetic, dxr2: rename dxr2 to draco   Samuel Egli
      • [U-Boot] [U-Boot, 1/2] siemens:cosmetic, dxr2: rename dxr2 to draco   Tom Rini
      • [U-Boot] [PATCH 2/2] siemens, draco: add new target   Samuel Egli
      • [U-Boot] [U-Boot,2/2] siemens, draco: add new target   Tom Rini
      • [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC   Tim Harvey
      • [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC   Stefano Babic
      • [U-Boot] [RFC PATCH v0 0/4] Improve arm64 support   Tom Rini
      • [U-Boot] [RFC PATCH v0 1/4] arm64: Correct passing of Linux kernel args   Tom Rini
      • [U-Boot] [RFC PATCH v0 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Tom Rini
      • [U-Boot] [RFC PATCH v0 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Rob Herring
      • [U-Boot] [RFC PATCH v0 2/4] cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images   Tom Rini
      • [U-Boot] [RFC PATCH v0 3/4] vexpress_aemv8a.h: Clean up the config   Tom Rini
      • [U-Boot] [RFC PATCH v0 3/4] vexpress_aemv8a.h: Clean up the config   Rob Herring
      • [U-Boot] [RFC PATCH v0 3/4] vexpress_aemv8a.h: Clean up the config   Tom Rini
      • [U-Boot] [RFC PATCH v0 4/4] vexpress_aemv8a.h: Enable CONFIG_CMD_BOOTI and CONFIG_CMD_UNZIP   Tom Rini
      • [U-Boot] [RFC PATCH v2 0/13] Enable driver model for GPIOs on Tegra   Simon Glass
      • [U-Boot] [RFC PATCH v2 01/13] Add an I/O tracing feature   Simon Glass
      • [U-Boot] [RFC PATCH v2 02/13] arm: Support iotrace feature   Simon Glass
      • [U-Boot] [RFC PATCH v2 03/13] sandbox: Support iotrace feature   Simon Glass
      • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Simon Glass
      • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Stephen Warren
      • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Masahiro Yamada
      • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Simon Glass
      • [U-Boot] [RFC PATCH v2 05/13] tegra: dts: Bring in GPIO bindings from linux   Simon Glass
      • [U-Boot] [RFC PATCH v2 05/13] tegra: dts: Bring in GPIO bindings from linux   Stephen Warren
      • [U-Boot] [RFC PATCH v2 05/13] tegra: dts: Bring in GPIO bindings from linux   Simon Glass
      • [U-Boot] [RFC PATCH v2 06/13] dm: Update README to encourage conversion to driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 07/13] dm: Use case-insensitive comparison for GPIO banks   Simon Glass
      • [U-Boot] [RFC PATCH v2 08/13] dm: Add missing header files in lists and root   Simon Glass
      • [U-Boot] [RFC PATCH v2 09/13] dm: Case away the const-ness of the global_data pointer   Simon Glass
      • [U-Boot] [RFC PATCH v2 10/13] dm: Allow driver model tests only for sandbox   Simon Glass
      • [U-Boot] [RFC PATCH v2 11/13] dm: Fix printf() strings in the 'dm' command   Simon Glass
      • [U-Boot] [RFC PATCH v2 12/13] tegra: Enable driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 12/13] tegra: Enable driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 12/13] tegra: Enable driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
      • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [PATCH V2 1/8] ums: support block devices not MMC devices   Stephen Warren
      • [U-Boot] [PATCH V2 4/8] ums: remove ums_disk_init()   Stephen Warren
      • [U-Boot] [PATCH V2 6/8] ums: use get_device() not find_mmc_device();   Stephen Warren
      • [U-Boot] [PATCH V2 7/8] ums: move all variable declarations to the start of the block   Stephen Warren
      • [U-Boot] [PATCH V2 8/8] ums: allow the user to specify the device type   Stephen Warren
      • [U-Boot] [PATCH V2 1/8] ums: support block devices not MMC devices   Marek Vasut
      • [U-Boot] [PATCH V2 1/8] ums: support block devices not MMC devices   Lukasz Majewski
      • [U-Boot] [PATCH V2 1/8] ums: support block devices not MMC devices   Przemyslaw Marczak
      • [U-Boot] [PATCH V2 1/8] ums: support block devices not MMC devices   Lukasz Majewski
      • [U-Boot] [PATCH V2 2/8] ums: remove UMS_{NUM, START}_SECTORS + UMS_START_SECTOR   Stephen Warren
      • [U-Boot] [PATCH V2 3/8] ums: remove error-checking of MMC device size   Stephen Warren
      • [U-Boot] [PATCH V2 5/8] ums: move IO support code to common location   Stephen Warren
      • [U-Boot] [PATCH v2] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
• [U-Boot] Pull request for u-boot-arm -> u-boot?   Stephen Warren
  • [U-Boot] Pull request for u-boot-arm -> u-boot?   Marek Vasut
    • [U-Boot] Pull request for u-boot-arm -> u-boot?   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-arm -> u-boot?   Tom Rini
    • [U-Boot] Pull request for u-boot-arm -> u-boot?   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-arm -> u-boot?   Fabio Estevam
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Otavio Salvador
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Marek Vasut
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Stephen Warren
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Tom Rini
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Stephen Warren
      • [U-Boot] Pull request for u-boot-arm -> u-boot?   Marek Vasut
• [U-Boot] MMC: proposal to support multiple physical partitions   Steve Rae
  • [U-Boot] [PATCH v3] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
  • [U-Boot] [U-boot] [Patch v2] config: k2hk_evm: Add generic board support   Ivan Khoronzhuk
  • [U-Boot] [PATCH v2] disk: part_efi: add support for the Secondary GPT   Steve Rae
  • [U-Boot] [PATCH v5 0/5] enable support for x16 NAND devices   Pekon Gupta
  • [U-Boot] [PATCH v5 1/5] mtd: nand: don't use read_buf for 8-bit ONFI transfers   Pekon Gupta
  • [U-Boot] [PATCH v5 2/5] mtd: nand: force NAND_CMD_READID onto 8-bit bus   Pekon Gupta
  • [U-Boot] [PATCH v5 3/5] mtd: nand: fix GET/SET_FEATURES address on 16-bit devices   Pekon Gupta
  • [U-Boot] [PATCH v5 4/5] mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width   Pekon Gupta
  • [U-Boot] [PATCH v5 5/5] omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT   Pekon Gupta
  • [U-Boot] [PATCH v5 0/5] enable support for x16 NAND devices   Gupta, Pekon
  • [U-Boot] NAND custodian (was Re: [PATCH v5 0/5] enable support for x16 NAND devices)   Scott Wood
  • [U-Boot] NAND custodian (was Re: [PATCH v5 0/5] enable support for x16 NAND devices)   Tom Rini
  • [U-Boot] NAND custodian (was Re: [PATCH v5 0/5] enable support for x16 NAND devices)   Heiko Schocher
  • [U-Boot] NAND custodian (was Re: [PATCH v5 0/5] enable support for x16 NAND devices)   Gupta, Pekon
  • [U-Boot] [PATCH v3] disk: part_efi: add support for the Backup GPT   Steve Rae
  • [U-Boot] [U-Boot, v3] disk: part_efi: add support for the Backup GPT   Tom Rini
  • [U-Boot] [PATCH v5 0/3] Android Fastboot support   Rob Herring
  • [U-Boot] [PATCH v5 1/3] image: add support for Android's boot image format   Rob Herring
  • [U-Boot] [PATCH v5 2/3] usb/gadget: add the fastboot gadget   Rob Herring
  • [U-Boot] [PATCH v5 3/3] arm: beagle: enable Android fastboot support   Rob Herring
  • [U-Boot] [PATCH v5 0/3] Android Fastboot support   Marek Vasut
  • [U-Boot] [PATCH v5 0/3] Android Fastboot support   Lukasz Majewski
  • [U-Boot] [PATCH 1/2] fs:ext4:cleanup: Remove superfluous code   Simon Glass
    • [U-Boot] [PATCH 0/2] mkimage: Refactor and clean up 32-bit crcs   Charles Manning
    • [U-Boot] [PATCH 1/2] mkimage : Split out and clean pbl_crc32 for use by other image types   Charles Manning
    • [U-Boot] [PATCH 1/2] mkimage : Split out and clean pbl_crc32 for use by other image types   Stefano Babic
    • [U-Boot] [PATCH 2/2] mkimage: Refactor mxsimage to use common crc32 code   Charles Manning
    • [U-Boot] [PATCH 2/2] mkimage: Refactor mxsimage to use common crc32 code   Stefano Babic
    • [U-Boot] [U-Boot, 2/2] mkimage: Refactor mxsimage to use common crc32 code   Tom Rini
    • [U-Boot] [U-Boot, 2/2] mkimage: Refactor mxsimage to use common crc32 code   Charles Manning
    • [U-Boot] [U-Boot, 2/2] mkimage: Refactor mxsimage to use common crc32 code   Tom Rini
    • [U-Boot] [PATCH v2 0/2] mkimage: Refactor and clean up 32-bit crcs   Charles Manning
    • [U-Boot] [PATCH v2 1/2] mkimage : Split out and clean pbl_crc32 for use by other image types   Charles Manning
    • [U-Boot] [PATCH v2 2/2] tools: Refactor mxsimage to use pbl_crc32   Charles Manning
    • [U-Boot] [PATCH 1/2] usb: ci_udc: allow multiple buffer allocs per ep   Stephen Warren
    • [U-Boot] [PATCH 2/2] usb: ums: remove ci_udc special case   Stephen Warren
    • [U-Boot] [PATCH 2/2] usb: ums: remove ci_udc special case   Marek Vasut
    • [U-Boot] [PATCH 1/2] usb: ci_udc: allow multiple buffer allocs per ep   Marek Vasut
• [U-Boot] [PATCH v3] mx6sabred: Add PFUZE100 PMIC support   Nikolay Dimitrov
  • [U-Boot] [PATCH v3] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
• [U-Boot] Mainline u-boot SPL for socfpga   Charles Manning
  • [U-Boot] Mainline u-boot SPL for socfpga   Chin Liang See
    • [U-Boot] Mainline u-boot SPL for socfpga   Charles Manning
  • [U-Boot] Mainline u-boot SPL for socfpga   Pavel Machek
    • [U-Boot] Mainline u-boot SPL for socfpga   Charles Manning
      • [U-Boot] Mainline u-boot SPL for socfpga   Chin Liang See
      • [U-Boot] Mainline u-boot SPL for socfpga   Pavel Machek
      • [U-Boot] [PATCH] generic board for socfpga   Pavel Machek
      • [U-Boot] [PATCH 1/3] arm: vf610: Add QSPI driver support   Chao Fu
      • [U-Boot] [PATCH 2/3] arm: imx: Add two macros for VF610 in IOMUX_PAD structure   Chao Fu
      • [U-Boot] [PATCH 3/3] arm: vf610: Add QSPI support for VF610TWR   Chao Fu
  • [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array   Tim Harvey
    • [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array   Nikita Kiryanov
      • [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array   Tim Harvey
      • [U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q   Tim Harvey
      • [U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q   Stefano Babic
      • [U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q   Troy Kisky
      • [U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q   Tim Harvey
      • [U-Boot] [PATCH v2] dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D   Tim Harvey
      • [U-Boot] [PATCH] imx: sata: return failure if not IMX6Q/IMX6D   Tim Harvey
• [U-Boot] [PATCH v4 1/3] usb:gadget:f_thor: code cleanup in function download_tail()   Przemyslaw Marczak
  • [U-Boot] [PATCH v2 0/2] fs:ext4: Fixes and code cleanup   Lukasz Majewski
  • [U-Boot] [PATCH v2 1/2] fs:ext4:cleanup: Remove superfluous code   Lukasz Majewski
  • [U-Boot] [U-Boot, v2, 1/2] fs:ext4:cleanup: Remove superfluous code   Tom Rini
  • [U-Boot] [PATCH v2 2/2] fs:ext4:write:fix: Reinitialize global variables after updating a file   Lukasz Majewski
  • [U-Boot] [U-Boot, v2, 2/2] fs:ext4:write:fix: Reinitialize global variables after updating a file   Tom Rini
• [U-Boot] [PATCH v2] Exynos5: config: Enable FIT   Minkyu Kang
• [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Christian Riesch
  • [U-Boot] [PATCH 1/2] mtd: nand: am335x_spl_bch.c: Fix problem with NAND_CMD_RNDOUT   Stefan Roese
  • [U-Boot] [PATCH 2/2] mtd: nand: nand_base.c: Fix address cycle problem with NAND_CMD_RNDOUT   Stefan Roese
  • [U-Boot] [PATCH 1/2] mtd: nand: am335x_spl_bch.c: Fix problem with NAND_CMD_RNDOUT   Gupta, Pekon
• [U-Boot] Loading uImage into RAM   Abdullah YILDIZ
  • [U-Boot] Loading uImage into RAM   Belisko Marek
    • [U-Boot] Loading uImage into RAM   Abdullah YILDIZ
      • [U-Boot] Loading uImage into RAM   Belisko Marek
      • [U-Boot] Loading uImage into RAM   Wolfgang Denk
      • [U-Boot] [PATCH v2] mtd: nand: Fix address cycle problem with NAND_CMD_RNDOUT   Stefan Roese
      • [U-Boot] [PATCH v2] mtd: nand: Fix address cycle problem with NAND_CMD_RNDOUT   Gupta, Pekon
      • [U-Boot] [PATCH v2] mtd: nand: Fix address cycle problem with NAND_CMD_RNDOUT   Gupta, Pekon
• [U-Boot] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] Pull request: u-boot-dfu   Marek Vasut
    • [U-Boot] Pull request: u-boot-dfu   Lukasz Majewski
      • [U-Boot] Pull request: u-boot-dfu   Heiko Schocher
      • [U-Boot] Pull request: u-boot-dfu   Lukasz Majewski
      • [U-Boot] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Christian Riesch
  • [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Heiko Schocher
    • [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Tom Taylor
    • [U-Boot] DA850EVM with USE_NAND config does not pad the AIS file   Christian Riesch
      • [U-Boot] [GIT PULL] Microblaze changes   Michal Simek
      • [U-Boot] [GIT PULL] Microblaze changes   Tom Rini
• [U-Boot] [PATCH] i2c: zynq: Fixed compilation errors when using DEBUG   Michal Simek
• [U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K   Michal Simek
  • [U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K   Jagan Teki
    • [U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K   Jagan Teki
• [U-Boot] [GIT PULL] Network zynq gem changes   Michal Simek
  • [U-Boot] [GIT PULL] Network zynq gem changes   Tom Rini
• [U-Boot] [PATCH] i2c: zynq: Fixed compilation errors when using DEBUG   Heiko Schocher
• [U-Boot] [GIT PULL] Serial changes for zynq.   Michal Simek
  • [U-Boot] [GIT PULL] Serial changes for zynq.   Tom Rini
• [U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f   Michal Simek
• [U-Boot] [PATCH] fat: Define MAX_CLUSTSIZE only if not defined in config   Michal Simek
• [U-Boot] [GIT PULL] fpga changes   Michal Simek
  • [U-Boot] [GIT PULL] fpga changes   Tom Rini
  • [U-Boot] [GIT PULL v2 ] fpga changes   Michal Simek
  • [U-Boot] [GIT PULL v2 ] fpga changes   Tom Rini
• [U-Boot] [PATCH] kbuild: Fix trailing whitespaces   Michal Simek
  • [U-Boot] [PATCH v12 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
  • [U-Boot] [PATCH v12 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
  • [U-Boot] [PATCH v12 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Minkyu Kang
  • [U-Boot] [PATCH v12 2/2] S5P: Exynos: Config: Enable GPIO CMD config   Akshay Saraswat
  • [U-Boot] [PATCH v12 0/2] S5P: Exynos: Add GPIO numbering feature   Piotr Wilczek
  • [U-Boot] [PATCH v3] Exynos5: config: Enable FIT   Akshay Saraswat
  • [U-Boot] [PATCH v3] Exynos5: config: Enable FIT   Minkyu Kang
  • [U-Boot] [PATCH] ARM: tegra: Venice2 pinmux spreadsheet updates   Stephen Warren
  • [U-Boot] [PATCH 4/4] cm-t54: add cm-t54 board support   Tom Rini
    • [U-Boot] [PATCH 4/4] cm-t54: add cm-t54 board support   Igor Grinberg
    • [U-Boot] [PATCH v2 4/4] cm-t54: add cm-t54 board support   Dmitry Lifshitz
    • [U-Boot] [U-Boot,v2,4/4] cm-t54: add cm-t54 board support   Tom Rini
  • [U-Boot] [PATCH] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Tom Rini
    • [U-Boot] [PATCH] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Ash Charles
    • [U-Boot] [PATCH] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Tom Rini
    • [U-Boot] [PATCH v2] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Ash Charles
    • [U-Boot] [U-Boot, v2] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Tom Rini
    • [U-Boot] [U-Boot, v2] am335x: pepper: Add Gumstix Pepper AM335x-based machine   Ash Charles
  • [U-Boot] [PATCH] omap4: duovero: Add Gumstix DuoVero machine.   Tom Rini
    • [U-Boot] [PATCH] omap4: duovero: Add Gumstix DuoVero machine.   Ash Charles
    • [U-Boot] [PATCH v2] omap4: duovero: Add Gumstix DuoVero machine.   Ash Charles
    • [U-Boot] [PATCH v2] omap4: duovero: Add Gumstix DuoVero machine.   Tom Rini
  • [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Tom Rini
    • [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Ash Charles
    • [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Tom Rini
    • [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Ash Charles
    • [U-Boot] [PATCH] omap3: overo: Use common configurations for Overo   Ash Charles
  • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
    • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   York Sun
    • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Jeroen Hofstee
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   York Sun
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Jeroen Hofstee
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   York Sun
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   York Sun
    • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Stefano Babic
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Tim Harvey
      • [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL   Stefano Babic
    • [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Tom Rini
      • [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Stephen Warren
      • [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?   Wolfgang Denk
      • [U-Boot] [PATCH v3] powerpc/85xx: add T4080 SoC support   Shengzhou Liu
      • [U-Boot] [PATCH] powerpc/t104xrdb: Toggle deep sleep management signals after resume   Tang Yuantian
      • [U-Boot] [PATCH] powerpc/t104xrdb: Toggle deep sleep management signals after resume   York Sun
      • [U-Boot] [PATCH v3] fsl/pci: Add workaround for erratum A-005434   Chunhe Lan
      • [U-Boot] [PATCH v3] fsl/pci: Add workaround for erratum A-005434   York Sun
      • [U-Boot] [PATCH] powerpc/85xx: Add T4160RDB board support   Chunhe Lan
      • [U-Boot] [PATCH] powerpc/85xx: Add T4160RDB board support   York Sun
• [U-Boot] [PATCHv3 00/13] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv3 00/13] mmc: exynos: code cleanup and support DDR mode   Minkyu Kang
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
• [U-Boot] [PATCH v2 0/9] Refactoring and Endian bug fixes of fdt_support   Masahiro Yamada
• [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Masahiro Yamada
  • [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board   Michal Simek
• [U-Boot] Porting New Board   David Nelson
• [U-Boot] [PATCH] trats2: config: fix: Set default console to ttySAC2   Minkyu Kang
• [U-Boot] [PATCH] trats: config: fix: Set default console to ttySAC2   Minkyu Kang
  • [U-Boot] [PATCH] arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais image   Christian Riesch
  • [U-Boot] arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais image   Tom Rini
  • [U-Boot] REGARDING UPDATION OF UBOOT AND UBL   CYRIL P. JOY
    • [U-Boot] [PATCH] gpio: at91: add sanity check for the NULL pointer   Josh Wu
    • [U-Boot] gpio: at91: add sanity check for the NULL pointer   Andreas Bießmann
    • [U-Boot] [PATCH] mmc: atmel_mci: fix print incorrect buffer content for debug   Josh Wu
    • [U-Boot] mmc: atmel_mci: fix print incorrect buffer content for debug   Andreas Bießmann
    • [U-Boot] [PATCH] powerpc/mpc85xx: Added B4460 support   Shaveta Leekha
    • [U-Boot] [PATCH] powerpc/mpc85xx: Added B4460 support   York Sun
• [U-Boot] [PATCHv2] ARM: exynos: remove the unused code   Minkyu Kang
• [U-Boot] ARM: zynq: sdhci clock frequency init question   Michal Simek
  • [U-Boot] ARM: zynq: sdhci clock frequency init question   Krunal Desai
    • [U-Boot] ARM: zynq: sdhci clock frequency init question   Michal Simek
• [U-Boot] [PATCH v2 0/9] FPGA subsystem changes   Michal Simek
• [U-Boot] [PATCH v2 1/9] fpga: spartan2: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH v2 2/9] fpga: spartan3: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH v2 3/9] fpga: virtex2: Avoid CamelCase   Michal Simek
• [U-Boot] [PATCH v2 4/9] fpga: xilinx: Avoid CamelCase for in Xilinx_desc   Michal Simek
• [U-Boot] [PATCH v2 5/9] fpga: xilinx: Fix the rest of CamelCases   Michal Simek
• [U-Boot] [PATCH v2 6/9] fpga: xilinx: Simplify load/dump/info function handling   Michal Simek
• [U-Boot] [PATCH v2 7/9] fpga: zynq: Remove sparse warnings   Michal Simek
• [U-Boot] [PATCH v2 8/9] fpga: zynq: Use helper functions for zynq dma   Michal Simek
• [U-Boot] [PATCH v2 9/9] fpga: zynq: Use helper function zynq_validate_bitstream   Michal Simek
  • [U-Boot] [PATCH] drivers/usb : Introduce APIs for fsl usb registers   Nikhil Badola
  • [U-Boot] [PATCH] drivers/usb : Introduce APIs for fsl usb registers   Wolfgang Denk
• [U-Boot] Mainline u-boot on socfpga (SocKit) board   Pavel Machek
  • [U-Boot] Mainline u-boot on socfpga (SocKit) board   Chin Liang See
    • [U-Boot] Mainline u-boot on socfpga (SocKit) board   Wolfgang Denk
    • [U-Boot] Mainline u-boot on socfpga (SocKit) board   Pavel Machek
• [U-Boot] [PATCH 03/12] MX6: add common SPL configuration   Nikita Kiryanov
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Stephen Warren
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Stephen Warren
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Tom Rini
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Pantelis Antoniou
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Stephen Warren
  • [U-Boot] [PATCH 1/4] cmd_part: fix type in part command help text   Pantelis Antoniou
  • [U-Boot] [PATCH 2/4] disk: support devices with HW partitions   Stephen Warren
  • [U-Boot] [PATCH 2/4] disk: support devices with HW partitions   Pantelis Antoniou
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Stephen Warren
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Fabio Estevam
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Stephen Warren
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Pantelis Antoniou
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Stephen Warren
  • [U-Boot] [PATCH 3/4] mmc: provide a select_hwpart implementation for get_device()   Pantelis Antoniou
  • [U-Boot] [PATCH 4/4] cmd_mmc: use new mmc_select_hwpart() function   Stephen Warren
  • [U-Boot] [PATCH 4/4] cmd_mmc: use new mmc_select_hwpart() function   Pantelis Antoniou
  • [U-Boot] [PATCH 4/4] cmd_mmc: use new mmc_select_hwpart() function   Stephen Warren
  • [PATCH v3] board_r: run scsi init() on ARM too   Ian Campbell
• [U-Boot] [PATCH v3 10/13] ARM: HYP/non-sec/PSCI: emit DT nodes   Ian Campbell
  • [U-Boot] [PATCH v3 10/13] ARM: HYP/non-sec/PSCI: emit DT nodes   Marc Zyngier
    • [U-Boot] [PATCH v3 10/13] ARM: HYP/non-sec/PSCI: emit DT nodes   Ian Campbell
• [U-Boot] [PATCH] ARM: tegra: use a CPU freq that all SKUs can support   Lucas Stach
  • [U-Boot] [PATCH] ARM: tegra: use a CPU freq that all SKUs can support   Stephen Warren
• [U-Boot] [PATCH v5 5/5] samsung: misc: remove download mode info screen   Minkyu Kang
• [U-Boot] [PATCH v5 4/5] samsung: misc: menu: increase delay in menu main loop   Minkyu Kang
• [U-Boot] [PATCH v5 3/5] samsung: misc: add env default option to lcd menu   Minkyu Kang
• [U-Boot] [PATCH v5 2/5] samsung: misc: add gpt restore option to lcd menu   Minkyu Kang
• [U-Boot] [PATCH v5 1/5] samsung: misc: allows using environmental macros as args in menu commands   Minkyu Kang
• [U-Boot] Please fill the maintainer field of chromebook-x86   Masahiro Yamada
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Tom Rini
  • [U-Boot] [PATCH v3 00/11] mx6: SPL NAND support   Tim Harvey
  • [U-Boot] [PATCH v3 02/11] spl: nand: add support for mxs nand   Tim Harvey
  • [U-Boot] [PATCH v3 03/11] mx6: add common SPL configuration   Tim Harvey
  • [U-Boot] [PATCH v3 04/11] mx6: add boot device support for SPL   Tim Harvey
  • [U-Boot] [PATCH v3 04/11] mx6: add boot device support for SPL   Nikita Kiryanov
  • [U-Boot] [PATCH v3 04/11] mx6: add boot device support for SPL   Tim Harvey
  • [U-Boot] [PATCH v3 04/11] mx6: add boot device support for SPL   Igor Grinberg
  • [U-Boot] [PATCH v3 05/11] imx: add comments and remove unused struct fields   Tim Harvey
  • [U-Boot] [PATCH v3 05/11] imx: add comments and remove unused struct fields   Nikita Kiryanov
  • [U-Boot] [PATCH v3 06/11] mx6: add structs for mmdc and ddr iomux registers   Tim Harvey
  • [U-Boot] [PATCH v3 06/11] mx6: add structs for mmdc and ddr iomux registers   Nikita Kiryanov
  • [U-Boot] [PATCH v3 06/11] mx6: add structs for mmdc and ddr iomux registers   Tim Harvey
  • [U-Boot] [PATCH v3 06/11] mx6: add structs for mmdc and ddr iomux registers   Stefano Babic
  • [U-Boot] [PATCH v3 07/11] mx6: add mmdc configuration for MX6Q/MX6DL   Tim Harvey
  • [U-Boot] [PATCH v4 07/11] mx6: add mmdc configuration for MX6Q/MX6DL   Tim Harvey
  • [U-Boot] [PATCH v3 08/11] imx: iomux: add macros to setup iomux for multiple SoC types   Tim Harvey
  • [U-Boot] [PATCH v3 09/11] imx: ventana: split read_eeprom into standalone file   Tim Harvey
  • [U-Boot] [PATCH v3 10/11] imx: ventana: auto-configure for IMX6Q vs IMX6DL   Tim Harvey
  • [U-Boot] [PATCH v3 11/11] imx: ventana: switch to SPL   Tim Harvey
  • [U-Boot] [PATCH v3 11/11] imx: ventana: switch to SPL   Stefano Babic
  • [U-Boot] [PATCH v3 11/11] imx: ventana: switch to SPL   Tim Harvey
  • [U-Boot] [PATCH v3 11/11] imx: ventana: switch to SPL   Stefano Babic
  • [U-Boot] [PATCH v3 00/11] mx6: SPL NAND support   Tim Harvey
  • [U-Boot] [PATCH v3 00/11] mx6: SPL NAND support   Stefano Babic
  • [U-Boot] [PATCH v3 00/11] mx6: SPL NAND support   Tim Harvey
  • [U-Boot] [PATCH v3 01/11] nand: remove CONFIG_SYS_NAND_PAGE_SIZE   Tim Harvey
  • [U-Boot] [PATCH v3 01/11] nand: remove CONFIG_SYS_NAND_PAGE_SIZE   Masahiro Yamada
  • [U-Boot] [PATCH v3 01/11] nand: remove CONFIG_SYS_NAND_PAGE_SIZE   Stefano Babic
  • [U-Boot] [PATCH v3 01/11] nand: remove CONFIG_SYS_NAND_PAGE_SIZE   Stefano Babic
• [U-Boot] [PATCH] drivers/usb : Introduce APIs for fsl usb registers   Wolfgang Denk
  • [U-Boot] [PATCH] zynq: ignore ps7_init.h   Masahiro Yamada
  • [U-Boot] [PATCH] zynq: ignore ps7_init.h   Michal Simek
  • [U-Boot] [PATCH] zynq: ignore ps7_init.h   Masahiro Yamada
  • [U-Boot] [PATCH] zynq: ignore ps7_init.h   Michal Simek
  • [U-Boot] [PATCH] zynq: ignore ps7_init.h   Masahiro Yamada
  • [U-Boot] [PATCH] zynq: add empty xil_io.h to avoid compile error   Masahiro Yamada
  • [U-Boot] [PATCH] zynq: add empty xil_io.h to avoid compile error   Michal Simek
  • [U-Boot] [PATCH] zynq: add empty xil_io.h to avoid compile error   Tom Rini
  • [U-Boot] [PATCH 0/3] fs: fat: misc fix for FAT16/12   Josh Wu
  • [U-Boot] [PATCH 1/3] fs/fat: add fat12 cluster check   Josh Wu
  • [U-Boot] [U-Boot,1/3] fs/fat: add fat12 cluster check   Tom Rini
  • [U-Boot] [PATCH 2/3] fs: fat_write: fix the incorrect last cluster checking   Josh Wu
  • [U-Boot] [U-Boot, 2/3] fs: fat_write: fix the incorrect last cluster checking   Tom Rini
  • [U-Boot] [PATCH 3/3] fs/fat: correct FAT16/12 file finding in root dir   Josh Wu
  • [U-Boot] [U-Boot, 3/3] fs/fat: correct FAT16/12 file finding in root dir   Tom Rini
• [U-Boot] [PATCH v2] dfu, nand: add medium specific polltimeout function   Lukasz Majewski
• [U-Boot] [PATCH 1/2] musb-new, dfu: first send request answer then call completions   Lukasz Majewski
• [U-Boot] [PATCH] sh: delete an unused source file   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] Pull request: u-boot-dfu   Marek Vasut
    • [U-Boot] [PATCH 0/4] mpc8313: ids8313 board updates   Heiko Schocher
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Heiko Schocher
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   mike
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Wolfgang Denk
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Heiko Schocher
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Simon Glass
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Wolfgang Denk
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Simon Glass
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Tom Rini
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Heiko Schocher
    • [U-Boot] [PATCH 1/4] bootm: allow to disable legacy image format   Tom Rini
    • [U-Boot] [PATCH 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Simon Glass
    • [U-Boot] [PATCH 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH 2/4] mpc8313, signed fit: disable legacy image format on ids8313 board   Heiko Schocher
    • [U-Boot] [PATCH 2/4] mpc8313, signed fit: disable legacy image format on ids8313 board   Kim Phillips
    • [U-Boot] [PATCH 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Heiko Schocher
    • [U-Boot] [PATCH 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Kim Phillips
    • [U-Boot] [PATCH][v2] drivers/usb : Define usb control register mask for w1c bits   Nikhil Badola
    • [U-Boot] [PATCH][v2] drivers/usb : Define usb control register mask for w1c bits   York Sun
• [U-Boot] Building under Cygwin - "-ansi" flag?   Vasili Galka
  • [U-Boot] Building under Cygwin - "-ansi" flag?   Tom Rini
  • [U-Boot] [PATCH] zynq: treat ps7_init.c/h as external files to ignore them   Masahiro Yamada
  • [U-Boot] [PATCH] zynq: treat ps7_init.c/h as external files to ignore them   Michal Simek
• [U-Boot] [PATCH] ARM: zynq: Enable generic board for Xilinx Zynq   Michal Simek
  • [U-Boot] [PATCH V2] ARM: tegra: use a CPU freq that all SKUs can support   Stephen Warren
  • [U-Boot] [PATCH v1 0/3] ARM: omap: add support for GPMC and ELM controllers on OMAP4 and OMAP5 platforms   Pekon Gupta
  • [U-Boot] [PATCH v1 1/3] ARM: omap4: add platform specific info for GPMC and ELM controllers   Pekon Gupta
  • [U-Boot] [U-Boot, v1, 1/3] ARM: omap4: add platform specific info for GPMC and ELM controllers   Tom Rini
  • [U-Boot] [PATCH v1 2/3] ARM: omap5: add platform specific info for GPMC and ELM controllers   Pekon Gupta
  • [U-Boot] [U-Boot, v1, 2/3] ARM: omap5: add platform specific info for GPMC and ELM controllers   Tom Rini
  • [U-Boot] [PATCH v1 3/3] ARM: omap: merge GPMC initialization code for all platform   Pekon Gupta
  • [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Tom Rini
  • [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Gupta, Pekon
  • [U-Boot] [U-Boot, v1, 3/3] ARM: omap: merge GPMC initialization code for all platform   Ash Charles
  • [U-Boot] [PATCH v1 0/3] ARM: omap: add support for GPMC and ELM controllers on OMAP4 and OMAP5 platforms   Gupta, Pekon
  • [U-Boot] [PATCH] mx6sabreauto: Add the mx6dual-lite variant   Fabio Estevam
  • [U-Boot] [PATCH] mx6sabreauto: Add the mx6dual-lite variant   Fabio Estevam
  • [U-Boot] [PATCH] mx6sabreauto: Add the mx6dual-lite variant   Stefano Babic
  • [U-Boot] [PATCH] mx6sabreauto: Add the mx6dual-lite variant   Stefano Babic
• [U-Boot] [sparc] Pull request   Daniel Hellstrom
  • [U-Boot] [sparc] Pull request   Tom Rini
  • [U-Boot] [sparc] Pull request   Daniel Hellstrom
• [U-Boot] [PATCH] boards.cfg: fix a configuration error of ep8248 board   Kim Phillips
• [U-Boot] [PATCH v3 0/5] net/designware: fixes for data cache, phylib and burst size   Ian Campbell
  • [U-Boot] [PATCH v3 1/5] net/designware: call phy_connect_dev() to properly setup phylib device   Ian Campbell
  • [U-Boot] [PATCH v3 2/5] net/designware: ensure device private data is DMA aligned.   Ian Campbell
  • [U-Boot] [PATCH v3 3/5] net/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN   Ian Campbell
  • [U-Boot] [PATCH v3 4/5] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
  • [U-Boot] [PATCH v3 4/5] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
  • [U-Boot] [PATCH v3 4/5] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Siarhei Siamashka
  • [U-Boot] [PATCH v3 5/5] net/designware: Make DMA burst length configurable and reduce by default   Ian Campbell
  • [U-Boot] [PATCH v3 0/5] net/designware: fixes for data cache, phylib and burst size   Albert ARIBAUD
  • [U-Boot] [PATCH] usb: ci_udc: parse QTD before over-writing it   Stephen Warren
  • [U-Boot] [PATCH] usb: ci_udc: parse QTD before over-writing it   Stephen Warren
  • [U-Boot] [PATCH 1/3] mx28evk: Remove extra CONFIG_ENV_SIZE   Fabio Estevam
  • [U-Boot] [PATCH 2/3] mx28evk: Add a target for SPI NOR boot   Fabio Estevam
  • [U-Boot] [PATCH 3/3] mx28evk: Add documentation on how to boot from SPI NOR   Fabio Estevam
  • [U-Boot] [PATCH v2 1/3] mx28evk: Remove extra CONFIG_ENV_SIZE   Fabio Estevam
  • [U-Boot] [PATCH v2 2/3] mx28evk: Add a target for SPI NOR boot   Fabio Estevam
  • [U-Boot] [PATCH v2 3/3] mx28evk: Add documentation on how to boot from SPI NOR   Fabio Estevam
  • [U-Boot] [PATCH v2 3/3] mx28evk: Add documentation on how to boot from SPI NOR   Fabio Estevam
  • [U-Boot] [PATCH v2 1/3] mx28evk: Remove extra CONFIG_ENV_SIZE   Stefano Babic
  • [U-Boot] [PATCH v2 1/3] mx28evk: Remove extra CONFIG_ENV_SIZE   Stefano Babic
• [U-Boot] [PATCH v4 1/3] usb:gadget:f_thor: code cleanup in function download_tail()   Przemyslaw Marczak
  • [U-Boot] [PATCH v4 1/3] usb:gadget:f_thor: code cleanup in function download_tail()   Lukasz Majewski
    • [U-Boot] [PATCH v4 1/3] usb:gadget:f_thor: code cleanup in function download_tail()   Marek Vasut
• [U-Boot] [PATCH 3/4] zmx25: Add extended support for the cpu and base boards   Stefano Babic
  • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [RFC] POWER framework v3 - wish list   Przemyslaw Marczak
  • [U-Boot] [RFC] POWER framework v3 - wish list   Simon Glass
  • [U-Boot] [RFC] POWER framework v3 - wish list   Przemyslaw Marczak
  • [U-Boot] [RFC] POWER framework v3 - wish list   Simon Glass
  • [U-Boot] [PATCH] powerpc/t2080qds: add fdt_fixup_dma3   Shengzhou Liu
  • [U-Boot] Booting using intiramfs isnetad of uramdisk (Zynq)   Heshsham Abdul Basit
• [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC   Stefano Babic
• [U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init   Stefano Babic
• [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics   Stefano Babic
• [U-Boot] [PATCH v2] iomux-v3: Add support for mx6sl LVE bit   Stefano Babic
• [U-Boot] [PATCH 1/4] imx25: Add new hardware registers   Stefano Babic
• [U-Boot] [PATCH 2/4] video: Add support for imx25 lcd controller   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: add HDMI and LVDS display capability   Stefano Babic
• [U-Boot] [PATCH] imx6: ventana: fix system-serial dt property   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: Convert to generic board   Stefano Babic
  • [U-Boot] Why is u-boot SPL reading u-boot.img twice [Zynq z7c02]?   Heshsham Abdul Basit
    • [U-Boot] Why is u-boot SPL reading u-boot.img twice [Zynq z7c02]?   Tom Rini
    • [U-Boot] [PATCH v2] dfu: mmc: Provide support for eMMC boot partition access   Lukasz Majewski
    • [U-Boot] [PATCH v2] dfu: mmc: Provide support for eMMC boot partition access   Marek Vasut
    • [U-Boot] [PATCH v4] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
    • [U-Boot] [PATCH v4] mx6sabred: Add PFUZE100 PMIC support   Fabio Estevam
    • [U-Boot] [PATCH v4] mx6sabred: Add PFUZE100 PMIC support   Stefano Babic
    • [U-Boot] [PATCH v4] mx6sabred: Add PFUZE100 PMIC support   Stefano Babic
    • [U-Boot] [RFC PATCH v2 0/13] Enable driver model for GPIOs on Tegra   Simon Glass
    • [U-Boot] [RFC PATCH v2 01/13] Add an I/O tracing feature   Simon Glass
    • [U-Boot] [RFC PATCH v2 02/13] arm: Support iotrace feature   Simon Glass
    • [U-Boot] [RFC PATCH v2 03/13] sandbox: Support iotrace feature   Simon Glass
    • [U-Boot] [RFC PATCH v2 03/13] sandbox: Support iotrace feature   Rommel G Custodio
    • [U-Boot] [RFC PATCH v2 03/13] sandbox: Support iotrace feature   Simon Glass
    • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Simon Glass
    • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Masahiro Yamada
    • [U-Boot] [RFC PATCH v2 04/13] Makefile: Support include files for .dts files   Stephen Warren
    • [U-Boot] [RFC PATCH v2 05/13] tegra: dts: Bring in GPIO bindings from linux   Simon Glass
    • [U-Boot] [RFC PATCH v2 05/13] tegra: dts: Bring in GPIO bindings from linux   Stephen Warren
    • [U-Boot] [RFC PATCH v2 06/13] dm: Update README to encourage conversion to driver model   Simon Glass
    • [U-Boot] [RFC PATCH v2 07/13] dm: Use case-insensitive comparison for GPIO banks   Simon Glass
    • [U-Boot] [RFC PATCH v2 08/13] dm: Add missing header files in lists and root   Simon Glass
    • [U-Boot] [RFC PATCH v2 09/13] dm: Cast away the const-ness of the global_data pointer   Simon Glass
    • [U-Boot] [RFC PATCH v2 10/13] dm: Allow driver model tests only for sandbox   Simon Glass
    • [U-Boot] [RFC PATCH v2 11/13] dm: Fix printf() strings in the 'dm' command   Simon Glass
    • [U-Boot] [RFC PATCH v2 12/13] tegra: Enable driver model   Simon Glass
    • [U-Boot] [RFC PATCH v2 12/13] tegra: Enable driver model   Stephen Warren
    • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
    • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Stephen Warren
    • [U-Boot] [RFC PATCH v2 13/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
    • [U-Boot] [RFC PATCH v2 0/13] Enable driver model for GPIOs on Tegra   Simon Glass
  • [U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f   Tom Rini
    • [U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f   Michal Simek
    • [U-Boot] [PATCH 0/3] add support for am43xx-sk   Felipe Balbi
    • [U-Boot] [PATCH 1/3] board: ti: am43xx: print unsupported board name   Felipe Balbi
    • [U-Boot] [PATCH 2/3] board: ti: am43xx: add support for AM43xx Starter Kit   Felipe Balbi
    • [U-Boot] [PATCH 3/3] configs: am43xx_evm: make sure to set devtype correctly   Felipe Balbi
• [U-Boot] idirafter causes host sha256.h to be included   Jeroen Hofstee
  • [U-Boot] idirafter causes host sha256.h to be included   Simon Glass
    • [U-Boot] idirafter causes host sha256.h to be included   Jeroen Hofstee
    • [U-Boot] idirafter causes host sha256.h to be included   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch 'tom'   Simon Glass
    • [U-Boot] Please pull u-boot-x86.git branch 'tom'   Tom Rini
    • [U-Boot] [PATCH] net/fm: call fm_port_to_index() with proper checks   Marian Rotariu
• [U-Boot] [PATCH u-boot sunxi 3/4] sunxi: Implement reset_cpu   Hans de Goede
• [U-Boot] uboot.lds   zhaobin xv
  • [U-Boot] Fwd: uboot.lds   zhaobin xv
  • [U-Boot] uboot.lds   Simon Glass
  • [U-Boot] tps6586x: staticize funtions   Manish Badarkhe
    • [U-Boot] [PATCH 0/2] kbuild - trivial fixes   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] kbuild: remove unused RANLIB   Masahiro Yamada
    • [U-Boot] [PATCH 2/2] kbuild: add missing PERL definition   Masahiro Yamada
    • [U-Boot] [PATCH v2] zynq: treat ps7_init.c/h as external files to ignore them   Masahiro Yamada
    • [U-Boot] [PATCH v2] zynq: treat ps7_init.c/h as external files to ignore them   Michal Simek
    • [U-Boot] [PATCH] tools, env, aes: fix compiling env tools for target   Heiko Schocher
    • [U-Boot] [PATCH] tools, env, aes: fix compiling env tools for target   Marek Vasut
    • [U-Boot] [PATCH] tools, env, aes: fix compiling env tools for target   Heiko Schocher
• [U-Boot] [U-boot] himport_r() function question   TigerLiu at via-alliance.com
  • [U-Boot] [PATCH] ARM: OMAP: Fix omap_sdram_size calculation   Lokesh Vutla
  • [U-Boot] ARM: OMAP: Fix omap_sdram_size calculation   Tom Rini
  • [U-Boot] [PATCH 1/2] drivers:dfu: dfu_flush(): add raw data flush to complete dfu write   Przemyslaw Marczak
  • [U-Boot] [PATCH 1/2] drivers:dfu: dfu_flush(): add raw data flush to complete dfu write   Marek Vasut
  • [U-Boot] [PATCH 2/2] usb:gadget:f_thor: download_tail(): remove dfu_write with 0 size   Przemyslaw Marczak
• [U-Boot] [zynq]: How to boot using u-boot-spl and image.ub?   Heshsham Abdul Basit
• [U-Boot] tools: env: Add aes.c placeholder   Heiko Schocher
• [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code   Stefan Agner
  • [U-Boot] [ANN] U-Boot v2014.07-rc1 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2014.07-rc1 released   Otavio Salvador
    • [U-Boot] [ANN] U-Boot v2014.07-rc1 released   Tom Rini
    • [U-Boot] [PATCH] boards.cfg: Keep entries sorted   Fabio Estevam
    • [U-Boot] boards.cfg: Keep entries sorted   Tom Rini
  • [U-Boot] [PATCH] fat: Define MAX_CLUSTSIZE only if not defined in config   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/master   Tom Rini
  • [U-Boot] [PATCH v2 0/12] Enable LCD display on snow   Simon Glass
    • [U-Boot] [PATCH v2 0/12] Enable LCD display on snow   Minkyu Kang
  • [U-Boot] kbuild: Fix trailing whitespaces   Tom Rini
  • [U-Boot] [U-Boot, RFC] bd_info: remove bi_barudrate member from struct bd_info   Tom Rini
  • [U-Boot] [U-Boot, v2] fs: fat: Fix cache align error message in fatwrite   Tom Rini
  • [U-Boot] serial: nsl16550: add hw flow control support   Tom Rini
  • [U-Boot] AR8035/phy: Enable autonegotiation function for ar8035   Tom Rini
  • [U-Boot] [U-Boot, 1/2, v4] net/phy: enable get_phy_id redefinable   Tom Rini
  • [U-Boot] cmd_time: do not show ticks   Tom Rini
  • [U-Boot] [U-Boot, v2, 1/5] rand: do not surround function declarations by #ifdef   Tom Rini
  • [U-Boot] [U-Boot, v2, 2/5] net: rename and refactor eth_rand_ethaddr() function   Tom Rini
  • [U-Boot] [U-Boot, v2, 3/5] blackfin: replace bfin_gen_rand_mac() with eth_random_addr()   Tom Rini
  • [U-Boot] [U-Boot,v2,4/5] fs: ubifs: drop __DATE__ and __TIME__   Tom Rini
  • [U-Boot] [U-Boot, v2, 5/5] kbuild: build with -Werror=date-time if the compiler supports it   Tom Rini
  • [U-Boot] lib/sha256: fix compile on some hosts   Tom Rini
  • [U-Boot] doc: README.generic-board: Fix typo   Tom Rini
  • [U-Boot] tps6586x: staticize funtions   Tom Rini
  • [U-Boot] kbuild: allow null board for spl build   Tom Rini
  • [U-Boot] hush shell: Avoid string write overflow when entering max cmd length   Tom Rini
  • [U-Boot] [U-Boot, v2] cosmetic: delete misleading comment /* CONFIG_BOARDDIR */   Tom Rini
  • [U-Boot] [U-Boot, v2] config: remove platform CONFIG_SYS_HZ definition part 4   Tom Rini
  • [U-Boot] [U-Boot, v2] nand_spl: remove unused linker scripts u-boot-nand.lds   Tom Rini
  • [U-Boot] tools: env: Add aes.c placeholder   Tom Rini
  • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Tom Rini
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Ian Campbell
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Tom Rini
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Ian Campbell
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Tom Rini
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Ian Campbell
    • [U-Boot] net/designware: call phy_connect_dev() to properly setup phylib device   Tom Rini
    • [U-Boot] [PATCH v13 0/2] S5P: Exynos: Add GPIO numbering feature   Akshay Saraswat
    • [U-Boot] [PATCH v13 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions   Akshay Saraswat
    • [U-Boot] [PATCH v13 2/2] S5P: Exynos: Config: Enable GPIO CMD config   Akshay Saraswat
    • [U-Boot] [PATCH v13 0/2] S5P: Exynos: Add GPIO numbering feature   Minkyu Kang
    • [U-Boot] [PATCH v13 0/2] S5P: Exynos: Add GPIO numbering feature   Jaehoon Chung
• [U-Boot] [PATCH] ARM: Samsung: s5p_goni: maintainer update   Minkyu Kang
  • [U-Boot] [PATCH] powerpc/mpc85xx: 32bit DDR changes for P1020/P1011   Prabhakar Kushwaha
  • [U-Boot] [PATCH] powerpc/mpc85xx: 32bit DDR changes for P1020/P1011   York Sun
  • [U-Boot] [PATCH] board/p1_p2_rdb:Enable p1_p2_rdb boot from NAND/SD/SPI in SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- corrected CSPR settings for BSC9132QDS NAND   Aneesh Bansal
  • [U-Boot] [PATCH] 85xx/p1020:Define no. of usb controllers used on P1020RDB-PD platform   Ramneek Mehresh
  • [U-Boot] [PATCH] 85xx/p1020:Define no. of usb controllers used on P1020RDB-PD platform   York Sun
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
  • [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
  • [U-Boot] Support for Tegra Jetson TK1   Hamza Farooq
  • [U-Boot] Support for Tegra Jetson TK1   Stephen Warren
  • [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Simon Glass
    • [U-Boot] [PATCH] sandbox: move source files from board/ to arch/sandbox/   Masahiro Yamada
• [U-Boot] Please pull mpc85xx   York Sun
  • [U-Boot] Please pull mpc85xx   York Sun
    • [U-Boot] Please pull mpc85xx   Tom Rini
• [U-Boot] gcc 4.3.5 and uboot 1.1.4.54 not working, uboot crashed   George Wang
• [U-Boot] [PATCH 1/2] board/freescale/common: ZM7300 driver   York Sun
• [U-Boot] [PATCH 2/2] board/b4qds: VID support   York Sun
• [U-Boot] powerpc/85xx: Add T4240RDB board support   York Sun
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb   York Sun
• [U-Boot] [PATCH 2/2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB   York Sun
• [U-Boot] [PATCH] powerpc/fman/memac: use default MDIO_HOLD value   York Sun
• [U-Boot] [PATCH v2] powerpc/t208x: enable errata A006261, A006593, A006379   York Sun
• [U-Boot] [PATCH v2] powerpc/85xx: add T4080 SoC support   York Sun
• [U-Boot] [PATCH 0/8] kmp204x patches for 2014.07   York Sun
• [U-Boot] [PATCH 0/5] PPC 85xx QEMU: Additional fixes   York Sun
• [U-Boot] [PATCH v4] qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"   York Sun
• [U-Boot] [PATCH] boards.cfg: fix a configuration error of ep8248 board   York Sun
  • [U-Boot] [PATCH V2] usb: ci_udc: parse QTD before over-writing it   Stephen Warren
  • [U-Boot] [PATCH V2] usb: ci_udc: parse QTD before over-writing it   Marek Vasut
  • [U-Boot] [PATCH] mx25pdk: Add generic board support   Fabio Estevam
• [U-Boot] Signed-off-by rules for U-Boot   Stephen Warren
  • [U-Boot] Signed-off-by rules for U-Boot   Stefano Babic
    • [U-Boot] [PATCH v2] Because sandbox is not a real hardware, setting vendor=sandbox is almost meaningless.   Simon Glass
    • [U-Boot] [PATCH v2] Because sandbox is not a real hardware, setting vendor=sandbox is almost meaningless.   Masahiro Yamada
    • [U-Boot] [PATCH] patman: Suppress duplicate signoffs only for real patches   Simon Glass
    • [U-Boot] [PATCH] patman: Suppress duplicate signoffs only for real patches   Michal Simek
    • [U-Boot] [PATCH] patman: Suppress duplicate signoffs only for real patches   Andreas Bießmann
  • [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Simon Glass
    • [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Doug Anderson
    • [U-Boot] [PATCH] patman: Don't request full names from get_maintainer   Simon Glass
  • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
    • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] armv8 relocation questions   Darwin Rambo
  • [U-Boot] armv8 relocation questions   fenghua at phytium.com.cn
  • [U-Boot] armv8 relocation questions   Darwin Rambo
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Tom Rini
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   fenghua at phytium.com.cn
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   Jeroen Hofstee
  • [U-Boot] armv8 relocation questions   Darwin Rambo
  • [U-Boot] armv8 relocation questions   Tom Rini
  • [U-Boot] armv8 relocation questions   fenghua at phytium.com.cn
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   fenghua at phytium.com.cn
  • [U-Boot] armv8 relocation questions   Wolfgang Denk
  • [U-Boot] armv8 relocation questions   fenghua at phytium.com.cn
  • [U-Boot] [U-Boot,v2] am33xx: add SSC enable macro   Tom Rini
  • [U-Boot] [U-Boot, 1/5] siemens: cosmetic: remove unused and rename defines   Tom Rini
  • [U-Boot] [U-Boot,2/5] siemens: update DDR3 parameters for dxr2   Tom Rini
  • [U-Boot] [U-Boot, 3/5] siemens: add led cmd for flexible LED control   Tom Rini
  • [U-Boot] [U-Boot, 4/5] siemens: change LED indication in DFU mode   Tom Rini
  • [U-Boot] [U-Boot,5/5] siemens: cosmetic: rename project_dir   Tom Rini
  • [U-Boot] mtd: nand: omap_gpmc: Fix update of read_ecc in oob   Tom Rini
  • [U-Boot] [U-Boot,1/4] ARM: OMAP5: add UART4 support   Tom Rini
  • [U-Boot] [U-Boot, 2/4] ARM: OMAP5: Power: add LDO2 support for Palmas driver   Tom Rini
  • [U-Boot] [U-Boot,3/4] ARM: OMAP5: add CKO buffer control mask   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
    • [U-Boot] [PATCH] Revert "sandbox: move source files from board/ to arch/sandbox/"   Masahiro Yamada
    • [U-Boot] [PATCH] Revert "sandbox: move source files from board/ to arch/sandbox/"   Simon Glass
    • [U-Boot] [PATCH v2] sandbox: set sandbox's vendor to null   Masahiro Yamada
    • [U-Boot] [PATCH v2] sandbox: set sandbox's vendor to null   Simon Glass
  • [U-Boot] imximage: MAX_HW_CFG_SIZE_V2 too small for i.MX6D?   Arne Rovet
    • [U-Boot] imximage: MAX_HW_CFG_SIZE_V2 too small for i.MX6D?   Stefano Babic
    • [U-Boot] imximage: MAX_HW_CFG_SIZE_V2 too small for i.MX6D?   Arne Rovet
• [U-Boot] [Bug Report] Patman removes author's Signed-off-by credit   Masahiro Yamada
  • [U-Boot] [Bug Report] Patman removes author's Signed-off-by credit   Simon Glass
    • [U-Boot] [Bug Report] Patman removes author's Signed-off-by credit   Masahiro Yamada
• [U-Boot] [PATCH v2 0/7] mtd: nand: omap: clean up of omap_elm and omap_gpmc driver   Gupta, Pekon
• [U-Boot] [PATCH v2 4/7] mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'   Stefan Roese
• [U-Boot] [PATCH v2 6/7] mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch   Stefan Roese
• [U-Boot] [PATCH v2 7/7] mtd: nand: omap: fix error-codes returned from omap-elm driver   Stefan Roese
  • [U-Boot] [GIT PULL] Zynq patches   Michal Simek
  • [U-Boot] [GIT PULL] Zynq patches v2   Michal Simek
  • [U-Boot] [GIT PULL] Zynq patches v2   Albert ARIBAUD
  • [U-Boot] [GIT PULL] Zynq patches v2   Albert ARIBAUD
  • [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
  • [U-Boot] [GIT PULL] Zynq patches   Albert ARIBAUD
  • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- corrected CSPR settings for BSC9132QDS NAND   Aneesh Bansal
  • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- corrected CSPR settings for BSC9132QDS NAND   York Sun
  • [U-Boot] SMSC LAN9500 u-boot drivers   Raghunath Pol
• [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
  • [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Siarhei Siamashka
    • [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Siarhei Siamashka
      • [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Ian Campbell
    • [U-Boot] [linux-sunxi] [PATCH 3/2] net/designware: reorder struct dw_eth_dev to pack more efficiently.   Marek Vasut
      • [U-Boot] [PATCH] arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards   Heiko Schocher
      • [U-Boot] [PATCH] arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards   Egli, Samuel
      • [U-Boot] arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards   Tom Rini
• [U-Boot] [PATCH] ARM: exynos5420: removed undefined gpio structure   Jaehoon Chung
  • [U-Boot] [PATCH] ARM: exynos5420: removed undefined gpio structure   Minkyu Kang
    • [U-Boot] [PATCH v2 0/4] mpc8313: ids8313 board updates   Heiko Schocher
    • [U-Boot] [PATCH v2 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH v2 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Simon Glass
    • [U-Boot] [PATCH v2 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH v2 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
    • [U-Boot] [PATCH v2 1/4] bootm: make use of legacy image format configurable   Michal Simek
    • [U-Boot] [PATCH v2 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
    • [U-Boot] [PATCH v2 1/4] bootm: make use of legacy image format configurable   Michal Simek
    • [U-Boot] [PATCH v2 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Heiko Schocher
    • [U-Boot] [PATCH v2 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Tom Rini
  • [U-Boot] [PATCH 0/4] zynq: fix OF control of Zynq   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] zynq: add UART nodes to device tree to initialize UART with OF   Masahiro Yamada
  • [U-Boot] [PATCH 0/4] zynq: fix OF control of Zynq   Michal Simek
  • [U-Boot] [PATCH 0/4] zynq: fix OF control of Zynq   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] build: support a new image u-boot-dtb.img   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] build: support a new image u-boot-dtb.img   Simon Glass
  • [U-Boot] [PATCH 2/4] zynq: load u-boot-dtb.img for SD boot   Masahiro Yamada
  • [U-Boot] [PATCH 2/4] zynq: load u-boot-dtb.img for SD boot   Michal Simek
  • [U-Boot] [PATCH 2/4] zynq: load u-boot-dtb.img for SD boot   Masahiro Yamada
  • [U-Boot] [PATCH 3/4] zynq: add memory nodes to device tree to initialize DRAM with OF   Masahiro Yamada
  • [U-Boot] [Patch v3] omap4: duovero: Add Gumstix DuoVero machine.   Ash Charles
  • [U-Boot] [U-Boot, v3] omap4: duovero: Add Gumstix DuoVero machine.   Tom Rini
  • [U-Boot] RFC: i.MX UART failures with baud-rate mis-match   Eric Nelson
  • [U-Boot] [RFC PATCH 1/2] serial_mxc: return question mark for chars received with high bit set   Eric Nelson
  • [U-Boot] [RFC PATCH 1/2] serial_mxc: return question mark for chars received with high bit set   Eric Nelson
  • [U-Boot] [RFC PATCH 2/2] serial_mxc: disable new features of autobaud detection   Eric Nelson
  • [U-Boot] [RFC PATCH 2/2] serial_mxc: disable new features of autobaud detection   Fabio Estevam
  • [U-Boot] [RFC PATCH 2/2] serial_mxc: disable new features of autobaud detection   Eric Nelson
• [U-Boot] i.MX tree way behind master   Otavio Salvador
  • [U-Boot] i.MX tree way behind master   Stefano Babic
    • [U-Boot] compulab: eeprom: enable any i2c driver   Tom Rini
      • [U-Boot] [PATCH] compulab: eeprom: add default eeprom address   Igor Grinberg
      • [U-Boot] compulab: eeprom: add default eeprom address   Tom Rini
      • [U-Boot] [PATCH] arm: bcm281xx: Add CONFIG_SYS_GENERIC_BOARD   Steve Rae
      • [U-Boot] [PATCH] vf610twr: Tune DDR initialization settings   Anthony Felice
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Darwin Rambo
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Jeroen Hofstee
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Darwin Rambo
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Wolfgang Denk
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Darwin Rambo
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Wolfgang Denk
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Darwin Rambo
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Wolfgang Denk
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Darwin Rambo
      • [U-Boot] [PATCH] arm: Allow u-boot to run from offset base address   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/pr-15052014   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/pr-15052014   Tom Rini
  • [U-Boot] [PATCH] serial_mxc: disable new features of autobaud detection   Eric Nelson
  • [U-Boot] [PATCH] serial_mxc: disable new features of autobaud detection   Stefano Babic
  • [U-Boot] [PATCH] serial_mxc: disable new features of autobaud detection   Stefano Babic
• [U-Boot] [PATCH] mpc85xx: configs: remove c=ffe from default environment   Kim Phillips
  • [U-Boot] [PATCH] mpc85xx: configs: remove c=ffe from default environment   York Sun
    • [U-Boot] [PATCH] mpc85xx: configs: remove c=ffe from default environment   Edward L Swarthout
  • [U-Boot] [PATCH] mpc85xx: configs: remove c=ffe from default environment   York Sun
• [U-Boot] [PATCHv3 01/13] arm: exynos: pinmux: add sdmmc4 gpio configratuion   Minkyu Kang
  • [U-Boot] [PATCH] powerpc/t4qds: Add alternate serdes protocols to align with A-007186   shh.xie at gmail.com
  • [U-Boot] [U-Boot PATCH 0/5] ARM: DRA72x: Add support for DRA72x SoC   Lokesh Vutla
  • [U-Boot] [U-Boot PATCH 1/5] ARM: DRA72x: Add Silicon ID support   Lokesh Vutla
  • [U-Boot] [U-Boot, U-Boot, 1/5] ARM: DRA72x: Add Silicon ID support   Tom Rini
  • [U-Boot] [U-Boot PATCH 2/5] ARM: DRA72x: volt: Update the pmic offsets   Lokesh Vutla
  • [U-Boot] [U-Boot, U-Boot, 2/5] ARM: DRA72x: volt: Update the pmic offsets   Tom Rini
  • [U-Boot] [U-Boot PATCH 3/5] ARM: DRA72x: clocks: Update the hwdata   Lokesh Vutla
  • [U-Boot] [U-Boot, U-Boot, 3/5] ARM: DRA72x: clocks: Update the hwdata   Tom Rini
  • [U-Boot] [U-Boot PATCH 4/5] ARM: DRA72x: Update EMIF data   Lokesh Vutla
  • [U-Boot] [U-Boot,U-Boot,4/5] ARM: DRA72x: Update EMIF data   Tom Rini
  • [U-Boot] [U-Boot PATCH 5/5] ARM: DRA7xx: ctrl: Fix efuse register addresses   Lokesh Vutla
  • [U-Boot] [U-Boot, U-Boot, 5/5] ARM: DRA7xx: ctrl: Fix efuse register addresses   Tom Rini
  • [U-Boot] [U-Boot PATCH 0/5] ARM: DRA72x: Add support for DRA72x SoC   Mugunthan V N
  • [U-Boot] [PATCH][v2] powerpc/t4qds: Add alternate serdes protocols to align with A-007186   shh.xie at gmail.com
  • [U-Boot] [PATCH] powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot   Liu Gang
  • [U-Boot] [PATCH] powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot   York Sun
• [U-Boot] [PATCH v2 09/12] exynos: dts: Disable cros_ec interrupts due to broken GPIOs   Minkyu Kang
  • [U-Boot] [PATCH v2 09/12] exynos: dts: Disable cros_ec interrupts due to broken GPIOs   Simon Glass
    • [U-Boot] [PATCH v2 09/12] exynos: dts: Disable cros_ec interrupts due to broken GPIOs   Minkyu Kang
      • [U-Boot] [PATCH v2 09/12] exynos: dts: Disable cros_ec interrupts due to broken GPIOs   Simon Glass
• [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Minkyu Kang
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Minkyu Kang
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Minkyu Kang
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   David Nelson
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Minkyu Kang
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Minkyu Kang
  • [U-Boot] [PATCH v2 07/12] exynos5: support tps65090 pmic   Simon Glass
• [U-Boot] [PATCH v2 10/12] exynos: dts: Enable LCD for snow   Minkyu Kang
  • [U-Boot] [PATCH v2 10/12] exynos: dts: Enable LCD for snow   Simon Glass
• [U-Boot] [PATCH v2 11/12] exynos: Enable the LCD backlight for snow   Minkyu Kang
  • [U-Boot] [PATCH v2 11/12] exynos: Enable the LCD backlight for snow   Simon Glass
• [U-Boot] [PATCH v2 04/12] power: Add support for TPS65090 PMU chip.   Minkyu Kang
  • [U-Boot] [PATCH v2 04/12] power: Add support for TPS65090 PMU chip.   Simon Glass
• [U-Boot] [PATCH] ARM: zynq: Show ECC status on the same line as DRAM size   Michal Simek
• [U-Boot] [PATCH v2] fpga: Added support to load bit stream from SD/MMC   Michal Simek
  • [U-Boot] [PATCH v2] fpga: Added support to load bit stream from SD/MMC   Tom Rini
  • [U-Boot] [PATCHv4 00/13] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv4 03/13] ARM: exynos: board: change the mmc/sd init sequence   Jaehoon Chung
  • [U-Boot] [PATCHv4 04/13] ARM: exynos: clock: modify the set_mmc_clk for exynos4   Jaehoon Chung
  • [U-Boot] [PATCHv4 05/13] ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMC   Jaehoon Chung
  • [U-Boot] [PATCHv4 06/13] mmc: exynos_dw_mmc: restore the property into host   Jaehoon Chung
  • [U-Boot] [PATCHv4 07/13] mmc: remove the unnecessary define and fix the wrong bit control   Jaehoon Chung
  • [U-Boot] [PATCHv4 08/13] mmc: support the DDR mode for eMMC   Jaehoon Chung
  • [U-Boot] [PATCHv4 09/13] mmc: dw_mmc: support the DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv4 10/13] ARM: dts: exnyos: enable dw-mmc controller   Jaehoon Chung
  • [U-Boot] [PATCHv4 11/13] mmc: exynos_dw_mmc: enable the DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv4 12/13] ARM: exynos4: enable the dwmmc configuration   Jaehoon Chung
  • [U-Boot] [PATCHv4 13/13] mmc: s5p_sdhci: add the s5p_sdhci_core_init function   Jaehoon Chung
  • [U-Boot] [PATCHv4 00/13] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv4 01/13] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Jaehoon Chung
  • [U-Boot] [PATCHv4 02/13] board: trats2: Enable device tree on Trats2   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 00/14] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 01/14] arm: exynos: pinmux: add sdmmc4 gpio configratuion   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 02/14] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 03/14] board: trats2: Enable device tree on Trats2   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 04/14] ARM: exynos: board: change the mmc/sd init sequence   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 05/14] ARM: exynos: clock: modify the set_mmc_clk for exynos4   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 06/14] ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMC   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 07/14] mmc: exynos_dw_mmc: restore the property into host   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 07/14] mmc: exynos_dw_mmc: restore the property into host   Minkyu Kang
  • [U-Boot] [RESEND PATCHv4 08/14] mmc: remove the unnecessary define and fix the wrong bit control   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 09/14] mmc: support the DDR mode for eMMC   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 10/14] mmc: dw_mmc: support the DDR mode   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 11/14] ARM: dts: exnyos: enable dw-mmc controller   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 12/14] mmc: exynos_dw_mmc: enable the DDR mode   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 13/14] ARM: exynos4: enable the dwmmc configuration   Jaehoon Chung
  • [U-Boot] [RESEND PATCHv4 14/14] mmc: s5p_sdhci: add the s5p_sdhci_core_init function   Jaehoon Chung
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
  • [U-Boot] [PATCH][v2] board/p1_p2_rdb:Enable p1_p2_rdb boot from NAND/SD/SPI in SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH][v2] board/p1_p2_rdb:Enable p1_p2_rdb boot from NAND/SD/SPI in SPL   York Sun
  • [U-Boot] [PATCH] board/t208x: update t2080qds/t2080rdb for errata A-007186   Shengzhou Liu
  • [U-Boot] [PATCH v2 0/5] zynq: fix OF control of Zynq   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/5] build: support a new image u-boot-dtb.img   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/5] zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined   Masahiro Yamada
  • [U-Boot] [PATCH v2 5/5] zynq: add UART nodes to device tree to initialize UART with OF   Masahiro Yamada
  • [U-Boot] [PATCH v2 0/5] zynq: fix OF control of Zynq   Michal Simek
  • [U-Boot] [PATCH v2 3/5] zynq: import zynq-7000.dtsi from Linux Kernel   Masahiro Yamada
  • [U-Boot] [PATCH v2 4/5] zynq: add memory nodes to device tree to initialize DRAM with OF   Masahiro Yamada
  • [U-Boot] [PATCH v3 0/5] ARM: refactor start.S files   Albert ARIBAUD
    • [U-Boot] [PATCH 0/8] zmx25: Add hardware support   dietho at gmx.de
    • [U-Boot] [PATCH 1/8] imx25: Add new hardware registers   dietho at gmx.de
    • [U-Boot] [PATCH 1/8] imx25: Add new hardware registers   Benoît Thébaudeau
    • [U-Boot] [PATCH 2/8] input: Add polytouch touch sensor controller   dietho at gmx.de
    • [U-Boot] [PATCH 3/8] mxc_i2c: Use the 3th i2c channel for imx25   dietho at gmx.de
    • [U-Boot] [PATCH 3/8] mxc_i2c: Use the 3th i2c channel for imx25   Heiko Schocher
    • [U-Boot] [PATCH 4/8] input: Add support for FMA1125 touch controller   dietho at gmx.de
    • [U-Boot] [PATCH 4/8] input: Add support for FMA1125 touch controller   Michal Simek
    • [U-Boot] [PATCH 5/8] input: Add support for MPR121 touch controller   dietho at gmx.de
    • [U-Boot] [PATCH 6/8] zmx25: Extended support for cpu and base boards   dietho at gmx.de
    • [U-Boot] [PATCH 7/8] imx25: Add new registers defines   dietho at gmx.de
    • [U-Boot] [PATCH 8/8] video: imx25lcdc: add board_video_init() call   dietho at gmx.de
    • [U-Boot] [PATCH 8/8] video: imx25lcdc: add board_video_init() call   Jeroen Hofstee
• [U-Boot] [PATCH v4] net/phy: Add support for CS4315/CS4340 PHY   York Sun
  • [U-Boot] [PATCH] examples: select libgcc for non-default architecture   Alexey Brodkin
  • [U-Boot] [PATCH] examples: select libgcc for non-default architecture   Masahiro Yamada
  • [U-Boot] [PATCH] examples: select libgcc for non-default architecture   Wolfgang Denk
• [U-Boot] [RFC] POWER framework v3 - wish list   Marek Vasut
  • [U-Boot] [RFC] POWER framework v3 - wish list   Przemyslaw Marczak
    • [U-Boot] [PATCH] Add myself as maintainer for chromebook-x86   Simon Glass
    • [U-Boot] Add myself as maintainer for chromebook-x86   Tom Rini
• [U-Boot] USB-ethernet LAN9500 U-Boot source   Simon Glass
  • [U-Boot] [PATCH][v3] powerpc/t4qds: Add alternate serdes protocols to align with A-007186   shh.xie at gmail.com
  • [U-Boot] [PATCHv5 00/14] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv5 01/14] arm: exynos: pinmux: add sdmmc4 gpio configratuion   Jaehoon Chung
  • [U-Boot] [PATCHv5 02/14] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function   Jaehoon Chung
  • [U-Boot] [PATCHv5 04/14] ARM: exynos: board: change the mmc/sd init sequence   Jaehoon Chung
  • [U-Boot] [PATCHv5 05/14] ARM: exynos: clock: modify the set_mmc_clk for exynos4   Jaehoon Chung
  • [U-Boot] [PATCHv5 06/14] ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMC   Jaehoon Chung
  • [U-Boot] [PATCHv5 07/14] mmc: exynos_dw_mmc: restore the property into host   Jaehoon Chung
  • [U-Boot] [PATCHv5 08/14] mmc: remove the unnecessary define and fix the wrong bit control   Jaehoon Chung
  • [U-Boot] [PATCHv5 09/14] mmc: support the DDR mode for eMMC   Jaehoon Chung
  • [U-Boot] [PATCHv5 09/14] mmc: support the DDR mode for eMMC   Hector Palacios
  • [U-Boot] [PATCHv5 09/14] mmc: support the DDR mode for eMMC   Jaehoon Chung
  • [U-Boot] [PATCHv5 09/14] mmc: support the DDR mode for eMMC   Hector Palacios
  • [U-Boot] [PATCHv5 09/14] mmc: support the DDR mode for eMMC   Jaehoon Chung
  • [U-Boot] [PATCHv5 10/14] mmc: dw_mmc: support the DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv5 11/14] ARM: dts: exnyos: enable dw-mmc controller   Jaehoon Chung
  • [U-Boot] [PATCHv5 12/14] mmc: exynos_dw_mmc: enable the DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv5 13/14] ARM: exynos4: enable the dwmmc configuration   Jaehoon Chung
  • [U-Boot] [PATCHv5 14/14] mmc: s5p_sdhci: add the s5p_sdhci_core_init function   Jaehoon Chung
  • [U-Boot] [PATCHv5 00/14] mmc: exynos: code cleanup and support DDR mode   Minkyu Kang
  • [U-Boot] [PATCHv5 00/14] mmc: exynos: code cleanup and support DDR mode   Jaehoon Chung
  • [U-Boot] [PATCHv5 03/14] board: trats2: Enable device tree on Trats2   Jaehoon Chung
• [U-Boot] [AVR32] CONFIG_SYS_TEXT_BASE is missing from atngw100mkii board   Masahiro Yamada
  • [U-Boot] [AVR32] CONFIG_SYS_TEXT_BASE is missing from atngw100mkii board   Andreas Bießmann
    • [U-Boot] [AVR32] CONFIG_SYS_TEXT_BASE is missing from atngw100mkii board   Masahiro Yamada
• [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Tim Harvey
  • [U-Boot] [PATCH] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Masahiro Yamada
    • [U-Boot] [PATCH v2] examples: select libgcc for non-default architecture   Alexey Brodkin
    • [U-Boot] [PATCH v2] examples: select libgcc for non-default architecture   Masahiro Yamada
    • [U-Boot] [PATCH v2] examples: select libgcc for non-default architecture   Wolfgang Denk
• [U-Boot] [PATCH v5 12/12] arm: goni: enable USB Mass Storage   Minkyu Kang
• [U-Boot] [PATCH v5 11/12] arm: goni: enable GPT command   Minkyu Kang
• [U-Boot] [PATCH v5 10/12] arm: goni: dfu: Add support for DFU to Goni target   Minkyu Kang
• [U-Boot] [PATCH v5 09/12] arm: goni: Update configuration for Goni target   Minkyu Kang
• [U-Boot] [PATCH 1/4] ARM: atmel: sama5d3xek: convert to generic board   Josh Wu
• [U-Boot] [PATCH 3/4] ARM: atmel: at91sam9m10g45ek: convert to generic board   Josh Wu
  • [U-Boot] [PATCH 0/2] ARMv7: at91: Enable ICache and DCache for at91 armv7 cpu   Josh Wu
  • [U-Boot] [PATCH 1/2] net: macb: enable dcache in macb   Josh Wu
  • [U-Boot] [PATCH 2/2] ARMv7: at91: enable ICache and DCache.   Josh Wu
  • [U-Boot] [PATCH 2/2] ARMv7: at91: enable ICache and DCache.   Bo Shen
  • [U-Boot] [PATCH 2/2] ARMv7: at91: enable ICache and DCache.   Josh Wu
  • [U-Boot] [PATCH 2/2] ARMv7: at91: enable ICache and DCache.   Bo Shen
  • [U-Boot] [PATCH] corvus: remove unneeded CONFIG_AT91_LEGACY   Andreas Bießmann
  • [U-Boot] corvus: remove unneeded CONFIG_AT91_LEGACY   Andreas Bießmann
  • [U-Boot] [PATCH] at91: move CONFIG_AT91FAMILY from board config file to hardware.h   Josh Wu
  • [U-Boot] [PATCH] at91: move CONFIG_AT91FAMILY from board config file to hardware.h   Bo Shen
  • [U-Boot] [PATCH] at91: move CONFIG_AT91FAMILY from board config file to hardware.h   Josh Wu
  • [U-Boot] [PATCH v3] examples: select libgcc for non-default architecture   Alexey Brodkin
  • [U-Boot] [PATCH v3] examples: select libgcc for non-default architecture   Wolfgang Denk
  • [U-Boot] [PATCH v3] examples: select libgcc for non-default architecture   Masahiro Yamada
  • [U-Boot] [U-Boot, v3] examples: select libgcc for non-default architecture   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: atmel: at91sam9x5ek: convert to generic board   Josh Wu
  • [U-Boot] [PATCH] powerpc/t4rdb: Add alternate serdes protocols to align with A-007186   Chunhe Lan
  • [U-Boot] [PATCH v2 0/3] Add atmel ROM code image   Andreas Bießmann
  • [U-Boot] [PATCH v2 1/3] mkimage: add atmelimage   Andreas Bießmann
  • [U-Boot] [PATCH v2 2/3] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
  • [U-Boot] [PATCH v2 2/3] arm:at91: enable ROM loadable atmel image   Bo Shen
  • [U-Boot] [PATCH v2 2/3] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
  • [U-Boot] [PATCH v2 2/3] arm:at91: enable ROM loadable atmel image   Bo Shen
  • [U-Boot] [PATCH v2 2/3] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
  • [U-Boot] [PATCH v2 3/3] sama5d3xek: enable PMECC header generation   Andreas Bießmann
  • [U-Boot] [PATCH] atngw100mkii: add missing CONFIG_SYS_TEXT_BASE   Andreas Bießmann
  • [U-Boot] atngw100mkii: add missing CONFIG_SYS_TEXT_BASE   Andreas Bießmann
  • [U-Boot] [PATCH] armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context   Tom Rini
  • [U-Boot] [PATCH] armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context   Lokesh Vutla
  • [U-Boot] armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context   Tom Rini
• [U-Boot] error when building env   Luka Perkov
  • [U-Boot] error when building env   Tom Rini
  • [U-Boot] error when building env   Luka Perkov
  • [U-Boot] [U-boot] [Patch 0/2] keystone: nand: add additional nand ecclayout   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 1/2] common: cmd_nand: add nand ecclayout command   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 2/2] mtd: nand: davinci: allow to change ecclayout by ecclayout command   Ivan Khoronzhuk
  • [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Tom Rini
    • [U-Boot] [PATCH 03/11] kconfig: add board Kconfig and defconfig files   Stephen Warren
  • [U-Boot] Please pull u-boot-x86.git branch tom   Simon Glass
    • [U-Boot] Please pull u-boot-x86.git branch tom   Tom Rini
• [U-Boot] PowerPC 405EX Hynix DDR DRAM Fails   Steve Miller
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
  • [U-Boot] [PATCH] dfu: mmc: return data from raw partition reads   Stephen Warren
  • [U-Boot] [PATCH] dfu: mmc: return data from raw partition reads   Stephen Warren
  • [U-Boot] Fwd: Patch to support dns-320 (variation of dns-325)   bastien ROUCARIES
  • [U-Boot] Patch to support dns-320 (variation of dns-325)   Prafulla Wadaskar
    • [U-Boot] Patch to support dns-320 (variation of dns-325)   Stefan Herbrechtsmeier
      • [U-Boot] [V2][PATCH 0/4] Support d-link dns320 (arch kirkwood)   Bastien ROUCARIÈS
      • [U-Boot] [PATCH 1/4] kirkwood: Rename dns325 to dnskw   Bastien ROUCARIÈS
      • [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320   Bastien ROUCARIÈS
      • [U-Boot] [PATCH 2/4] kirkwood: Add support for the D-Link DNS-320   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325   Bastien ROUCARIÈS
      • [U-Boot] [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Bastien ROUCARIÈS
      • [U-Boot] [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Prafulla Wadaskar
      • [U-Boot] [PATCH 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Stefan Herbrechtsmeier
• [U-Boot] Going beyond CONFIG_SYS_CBSIZE limit causes a hang   Fabio Estevam
  • [U-Boot] Going beyond CONFIG_SYS_CBSIZE limit causes a hang   Fabio Estevam
    • [U-Boot] [PATCH] mx6sabre_common: Avoid console hang due to small CONFIG_SYS_PBSIZE   Fabio Estevam
    • [U-Boot] [PATCH] mx6sabre_common: Avoid console hang due to small CONFIG_SYS_PBSIZE   Josh Wu
    • [U-Boot] [PATCH] rmobile: r8a7791: Fix MOD_SEL3 function table about FN_SEL_IEB   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] arm: rmobile: r8a7791: Fix MOD_SEL3 function table about FN_SEL_IEB   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] board: koelsch: Fix QoS revision 0.240 and 0.320   Nobuhiro Iwamatsu
• [U-Boot] Unable to boot the new FIT image   KJ H. Kiran
  • [U-Boot] Unable to boot the new FIT image   Jagan Teki
    • [U-Boot] Unable to boot the new FIT image   Simon Glass
    • [U-Boot] [PATCH v3 0/4] mpc8313: ids8313 board updates   Heiko Schocher
    • [U-Boot] [PATCH v3 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
    • [U-Boot] [PATCH v3 1/4] bootm: make use of legacy image format configurable   Steubesand, Lars
    • [U-Boot] [PATCH v3 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
    • [U-Boot] [PATCH v3 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Heiko Schocher
    • [U-Boot] [PATCH v3 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH v3 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Simon Glass
    • [U-Boot] [PATCH v3 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
    • [U-Boot] [PATCH v3 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Heiko Schocher
    • [U-Boot] [PATCH] powerpc/85xx: add fdt_fixup_dma3   Shengzhou Liu
    • [U-Boot] [PATCH 1/3] arm: armadillo800eva: Enable CONFIG_SYS_GENERIC_BOARD   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/3] arm: koelsch: Enable CONFIG_SYS_GENERIC_BOARD   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 3/3] arm: lager: Enable CONFIG_SYS_GENERIC_BOARD   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2] net/fm: call fm_port_to_index() with proper checks   Marian Rotariu
    • [U-Boot] [PATCH v5] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou Liu
• [U-Boot] Building under Cygwin - "-ansi" flag?   Vasili Galka
  • [U-Boot] Building under Cygwin - "-ansi" flag?   Jeroen Hofstee
    • [U-Boot] Building under Cygwin - "-ansi" flag?   Vasili Galka
      • [U-Boot] Building under Cygwin - "-ansi" flag?   Jeroen Hofstee
      • [U-Boot] [PATCH v2 0/3] Enable ICache and DCache for at91 armv7 Soc   Josh Wu
      • [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb   Josh Wu
      • [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb   Bo Shen
      • [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb   Andreas Bießmann
      • [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb   Josh Wu
      • [U-Boot] [RESEND][PATCH v2 1/3] net: macb: enable dcache in macb   Josh Wu
      • [U-Boot] [PATCH v2 2/3] video: atmel_hlcdfb: enable dcache support   Josh Wu
      • [U-Boot] [PATCH v2 2/3] video: atmel_hlcdfb: enable dcache support   Anatolij Gustschin
      • [U-Boot] [PATCH v2 3/3] ARMv7: at91: enable ICache and DCache.   Josh Wu
      • [U-Boot] [PATCH v3 0/3] Add atmel ROM code image   Andreas Bießmann
      • [U-Boot] [PATCH v3 1/3] mkimage: add atmelimage   Andreas Bießmann
      • [U-Boot] [PATCH v3 1/3] mkimage: add atmelimage   Bo Shen
      • [U-Boot] [U-Boot,v3,1/3] mkimage: add atmelimage   Andreas Bießmann
      • [U-Boot] [PATCH v3 2/3] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
      • [U-Boot] [U-Boot,v3,2/3] arm:at91: enable ROM loadable atmel image   Andreas Bießmann
      • [U-Boot] [PATCH v3 3/3] sama5d3xek: enable PMECC header generation   Andreas Bießmann
      • [U-Boot] [U-Boot,v3,3/3] sama5d3xek: enable PMECC header generation   Andreas Bießmann
      • [U-Boot] [PATCH 1/2] usb: hub: fix power good delay timing   Stephen Warren
      • [U-Boot] [PATCH 1/2] usb: hub: fix power good delay timing   Stephen Warren
      • [U-Boot] [PATCH 2/2] usb: hub: remove CONFIG_USB_HUB_MIN_POWER_ON_DELAY   Stephen Warren
      • [U-Boot] [PATCH v2 1/2] am43xx_evm: Add qspiboot target   Tom Rini
      • [U-Boot] [PATCH v2 2/2] ti: qspi: populate slave device to set flash quad bit.   Tom Rini
  • [U-Boot] [PATCH v2 7/7] MIPS: Malta: convert to generic board   Stephen Scott
    • [U-Boot] [PATCH] dfu: fix some issues with reads/uploads   Stephen Warren
    • [U-Boot] [PATCH] dfu: fix some issues with reads/uploads   Lukasz Majewski
    • [U-Boot] [PATCH] dfu: fix some issues with reads/uploads   Stephen Warren
    • [U-Boot] [PATCH] dfu: fix some issues with reads/uploads   Lukasz Majewski
    • [U-Boot] [PATCH] dfu: fix some issues with reads/uploads   Stephen Warren
    • [U-Boot] [PATCH] cmd_mmc.c: check mmc_init() during mmc dev   Bryan Wu
    • [U-Boot] [PATCH] cmd_mmc.c: check mmc_init() during mmc dev   Stephen Warren
    • [U-Boot] [PATCH] cmd_mmc.c: check mmc_init() during mmc dev   Bryan Wu
• [U-Boot] [U-boot] Does u-boot support being compiled by clang compiler?   TigerLiu at via-alliance.com
  • [U-Boot] [U-boot] Does u-boot support being compiled by clang compiler?   Jeroen Hofstee
    • [U-Boot] [PATCH v2] powerpc/t4rdb: Add alternate serdes protocols to align with A-007186   Chunhe Lan
• [U-Boot] Unable to boot the new FIT image   KJ H. Kiran
  • [U-Boot] [PATCH] board/t2080qds: some update for ddr   Shengzhou Liu
• [U-Boot] Unable to boot the new FIT image   Simon Glass
  • [U-Boot] [PATCH v3] powerpc/t4rdb: Add alternate serdes protocols to align with A-007186   Chunhe Lan
  • [U-Boot] [PATCH v4 0/4] mpc8313: ids8313 board updates   Heiko Schocher
  • [U-Boot] [PATCH v4 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
  • [U-Boot] [PATCH v4 1/4] bootm: make use of legacy image format configurable   Simon Glass
  • [U-Boot] [PATCH v4 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
  • [U-Boot] [PATCH v4 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Heiko Schocher
  • [U-Boot] [PATCH v4 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
  • [U-Boot] [PATCH v4 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Heiko Schocher
  • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] build u-boot tools for win32   Hannes Petermaier
  • [U-Boot] [PATCH] ARM: at91: remove AT91X40 macro since it is not use any more   Josh Wu
  • [U-Boot] [PATCH] ARM: at91: remove AT91X40 macro since it is not use any more   Bo Shen
  • [U-Boot] ARM: at91: remove AT91X40 macro since it is not use any more   Andreas Bießmann
  • [U-Boot] [PATCH v2 0/3] ARM: at91: add missed the AT91FAMILY and ARM926EJS in SoC header   Josh Wu
  • [U-Boot] [PATCH v2 1/3] ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header   Josh Wu
  • [U-Boot] [PATCH v2 1/3] ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header   Bo Shen
  • [U-Boot] [U-Boot, v2, 1/3] ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header   Andreas Bießmann
  • [U-Boot] [PATCH v2 2/3] at91: remove redundant AT91FAMILY definition in board config file   Josh Wu
  • [U-Boot] [U-Boot, v2, 2/3] at91: remove redundant AT91FAMILY definition in board config file   Andreas Bießmann
  • [U-Boot] [PATCH v2 3/3] ARM: at91: remove redundant ARM926EJS definition in board config files   Josh Wu
  • [U-Boot] [U-Boot, v2, 3/3] ARM: at91: remove redundant ARM926EJS definition in board config files   Andreas Bießmann
  • [U-Boot] [PATCH 1/2] ARM: at91sam9m10g45ek: enable mci0 support   Josh Wu
  • [U-Boot] [PATCH 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Josh Wu
  • [U-Boot] [PATCH 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Bo Shen
  • [U-Boot] [PATCH 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Josh Wu
  • [U-Boot] [PATCH 1/2] ARM: at91sam9m10g45ek: enable mci0 support   Bo Shen
  • [U-Boot] [PATCH 1/2] ARM: at91sam9m10g45ek: enable mci0 support   Josh Wu
  • [U-Boot] [PATCH v3 0/12] Enable LCD display on snow   Simon Glass
  • [U-Boot] [PATCH v3 02/12] exynos: Drop old smdk5250.c file   Simon Glass
  • [U-Boot] [PATCH v3 0/12] Enable LCD display on snow   Tom Rini
  • [U-Boot] [PATCH v3 0/12] Enable LCD display on snow   Simon Glass
  • [U-Boot] [PATCH v3 0/12] Enable LCD display on snow   Minkyu Kang
  • [U-Boot] [PATCH v3 01/12] exynos: dts: Correct EC interrupt GPIO   Simon Glass
  • [U-Boot] [PATCH v3 03/12] power: Rename CONFIG_PMIC_... to CONFIG_POWER_...   Simon Glass
  • [U-Boot] [PATCH v3 04/12] power: Add PMIC_ prefix to CHARGER_EN/DISABLE   Simon Glass
  • [U-Boot] [PATCH v3 05/12] power: Add support for TPS65090 PMU chip.   Simon Glass
  • [U-Boot] [PATCH v3 06/12] exynos5: Enable tps65090 on exynos5-dt   Simon Glass
  • [U-Boot] [PATCH v3 07/12] power: Explicitly select pmic device's bus   Simon Glass
  • [U-Boot] [PATCH v3 08/12] exynos5: support tps65090 pmic   Simon Glass
  • [U-Boot] [PATCH v3 09/12] exynos: Enable PSHOLD in SPL   Simon Glass
  • [U-Boot] [PATCH v3 10/12] exynos: dts: Enable LCD for snow   Simon Glass
  • [U-Boot] [PATCH v3 11/12] exynos: Enable the LCD backlight for snow   Simon Glass
  • [U-Boot] [PATCH v3 12/12] initcall: Improve debugging support   Simon Glass
• [U-Boot] [GIT PULL] Fpga changes - next round   Michal Simek
  • [U-Boot] [GIT PULL] Fpga changes - next round   Tom Rini
  • [U-Boot] [PATCH] Prevent a stack overflow in fit_check_sign   Michael van der Westhuizen
    • [U-Boot] [PATCH] Prevent a stack overflow in fit_check_sign   Simon Glass
• [U-Boot] [PATCH] Prevent a buffer overflow in mkimage when signing with SHA256   Michael van der Westhuizen
• [U-Boot] [PATCH] net: phy/vitesse: Add support for VSC8664 phy module   York Sun
• [U-Boot] [PATCH] board/freescale: Move CRC32 offset in NXID v1 data format   York Sun
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Stephen Warren
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Jaehoon Chung
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Stephen Warren
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Jaehoon Chung
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Stephen Warren
  • [U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev   Stephen Warren
• [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree   Ash Charles
  • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
    • [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] [PATCH] mxs: fixed battery boot on imx233-olinuxino-micro   Peter Schumann
    • [U-Boot] [PATCH] mxs: fixed battery boot on imx233-olinuxino-micro   Marek Vasut
    • [U-Boot] [PATCH] mxs: fixed battery boot on imx233-olinuxino-micro   Peter Schumann
    • [U-Boot] [PATCH] powerpc/espi: remove 80us delay to improve transfer performance   Hou Zhiqiang
    • [U-Boot] [PATCH v2 1/2] ARM: at91sam9m10g45ek: enable mci0 support   Josh Wu
    • [U-Boot] [PATCH v2 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Josh Wu
    • [U-Boot] [PATCH v2 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Bo Shen
    • [U-Boot] [U-Boot, v2, 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support   Andreas Bießmann
    • [U-Boot] [PATCH v2 1/2] ARM: at91sam9m10g45ek: enable mci0 support   Bo Shen
    • [U-Boot] [U-Boot,v2,1/2] ARM: at91sam9m10g45ek: enable mci0 support   Andreas Bießmann
    • [U-Boot] [PATCH] board/t2080qds: enable sst and eon spi flash for nor boot   Shengzhou Liu
  • [U-Boot] mkimage: path behavior for FIT images   Yegor Yefremov
    • [U-Boot] mkimage: path behavior for FIT images   Simon Glass
    • [U-Boot] mkimage: path behavior for FIT images   Yegor Yefremov
    • [U-Boot] mkimage: path behavior for FIT images   Simon Glass
    • [U-Boot] mkimage: path behavior for FIT images   Simon Glass
  • [U-Boot] VMM as a standalone app.   mazen.e
  • [U-Boot] Booting armv8 kernel on uboot   Vishal Bhoj
    • [U-Boot] Booting armv8 kernel on uboot   Mark Rutland
      • [U-Boot] Booting armv8 kernel on uboot   Tom Rini
      • [U-Boot] Booting armv8 kernel on uboot   Mark Rutland
      • [U-Boot] Booting armv8 kernel on uboot   Vishal Bhoj
      • [U-Boot] Booting armv8 kernel on uboot   Tom Rini
      • [U-Boot] Booting armv8 kernel on uboot   Vishal Bhoj
      • [U-Boot] Booting armv8 kernel on uboot   fenghua at phytium.com.cn
      • [U-Boot] Booting armv8 kernel on uboot   Tom Rini
      • [U-Boot] Booting armv8 kernel on uboot   Vishal Bhoj
      • [U-Boot] Booting armv8 kernel on uboot   fenghua at phytium.com.cn
      • [U-Boot] Booting armv8 kernel on uboot   fenghua at phytium.com.cn
      • [U-Boot] Booting armv8 kernel on uboot   TigerLiu at via-alliance.com
      • [U-Boot] Booting armv8 kernel on uboot   fenghua at phytium.com.cn
      • [U-Boot] Booting armv8 kernel on uboot   TigerLiu at via-alliance.com
      • [U-Boot] [RFC,PATCH 0/4] mtd, ubi, ubifs: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC,PATCH 1/4] dm: rename device struct to udevice   Heiko Schocher
      • [U-Boot] [RFC,PATCH 2/4] lib, rbtree: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC,PATCH 4/4] mtd, ubi, ubifs: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH 0/4] mtd, ubi, ubifs: resync with Linux-3.14   Jörg Krause
      • [U-Boot] [RFC, PATCH 0/4] mtd, ubi, ubifs: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH 3/4] lib, list_sort: add list_sort from linux 3.14   Heiko Schocher
      • [U-Boot] [PATCH] tb100 - add Abilis TB100 board   Alexey Brodkin
• [U-Boot] Script with 'if run' don't work as expected   Stefan Herbrechtsmeier
  • [U-Boot] Script with 'if run' don't work as expected   Simon Glass
    • [U-Boot] [PATCH 0/2] Introduction of new board Peach-Pit   Akshay Saraswat
    • [U-Boot] [PATCH 1/2] Exynos5420: Introduce support for the Peach-Pit board   Akshay Saraswat
    • [U-Boot] [PATCH 1/2] Exynos5420: Introduce support for the Peach-Pit board   Simon Glass
    • [U-Boot] [PATCH 2/2] Exynos5420: Let macros be used for exynos5420   Akshay Saraswat
    • [U-Boot] [PATCH 2/2] Exynos5420: Let macros be used for exynos5420   Simon Glass
    • [U-Boot] [PATCH] arm64: zero cntvoff_el2   Mark Rutland
    • [U-Boot] [PATCH] arm64: zero cntvoff_el2   fenghua at phytium.com.cn
  • [U-Boot] [PATCH 3/3 V2] ARM: mxs: Fix NAND FCB flashing   jkrause
    • [U-Boot] [PATCH 3/3 V2] ARM: mxs: Fix NAND FCB flashing   Marek Vasut
• [U-Boot] Cannot source LVDS from SATA on MX6DL/SOLO   Fabio Estevam
  • [U-Boot] Cannot source LVDS from SATA on MX6DL/SOLO   Fabio Estevam
  • [U-Boot] Export Uboot command line functions to a standalone app.   mazen.e
  • [U-Boot] Unable to boot the new FIT image   Harsha Kiran
    • [U-Boot] Unable to boot the new FIT image   Simon Glass
      • [U-Boot] Unable to boot the new FIT image   Simon Glass
      • [U-Boot] Unable to boot the new FIT image   Harsha Kiran
      • [U-Boot] Unable to boot the new FIT image   Simon Glass
      • [U-Boot] Unable to boot the new FIT image   Harsha Kiran
      • [U-Boot] [PATCH 0/2] arm:am33xx: Fix problems with XIP booting and i2c   Tom Rini
      • [U-Boot] [PATCH 2/2] arm:am33xx: Rework s_init and add board_early_init_f   Tom Rini
      • [U-Boot] [PATCH 1/2] arm:am33xx: Make dram_init call sdram_init() in some contexts   Tom Rini
      • [U-Boot] [PATCH] phy: fix create_phy_by_mask for when its given an actual search mask   Cormier, Jonathan
    • [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Tom Rini
      • [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Wolfgang Denk
      • [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Tom Rini
      • [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Simon Glass
      • [U-Boot] [RFC] Extend 'bootm' to support Linux kernel generated images   Tom Rini
      • [U-Boot] [PATCH 1/2] openrisc: update SPR registers definition   Franck Jullien
      • [U-Boot] [PATCH 2/2] openrisc: fix relocation code   Franck Jullien
      • [U-Boot] [Patch v2 0/9] omap3: overo: update board data   Ash Charles
      • [U-Boot] [Patch v2 1/9] omap: overo: allow the use of a plain text env file instead boot scripts   Ash Charles
      • [U-Boot] [U-Boot, v2, 1/9] omap: overo: allow the use of a plain text env file instead boot scripts   Tom Rini
      • [U-Boot] [Patch v2 2/9] OMAP3: overo: add command support for mtd and ubi   Ash Charles
      • [U-Boot] [U-Boot, v2, 2/9] OMAP3: overo: add command support for mtd and ubi   Tom Rini
      • [U-Boot] [Patch v2 3/9] OMAP3: overo: increase linux partition to 8 MiB   Ash Charles
      • [U-Boot] [U-Boot, v2, 3/9] OMAP3: overo: increase linux partition to 8 MiB   Tom Rini
      • [U-Boot] [Patch v2 4/9] OMAP3: overo: eliminate hard-coded partition offsets   Ash Charles
      • [U-Boot] [U-Boot, v2, 4/9] OMAP3: overo: eliminate hard-coded partition offsets   Tom Rini
      • [U-Boot] [Patch v2 5/9] arm: omap3: Fix omap3_overo SPL boot hangup   Ash Charles
      • [U-Boot] [U-Boot, v2, 5/9] arm: omap3: Fix omap3_overo SPL boot hangup   Tom Rini
      • [U-Boot] [Patch v2 6/9] [omap3][overo] Add Board Revision for Wireless chip   Ash Charles
      • [U-Boot] [U-Boot, v2, 6/9, omap3, overo] Add Board Revision for Wireless chip   Tom Rini
      • [U-Boot] [Patch v2 7/9] OMAP3: overo: add some Gumstix expansion boards   Ash Charles
      • [U-Boot] [U-Boot, v2, 7/9] OMAP3: overo: add some Gumstix expansion boards   Tom Rini
      • [U-Boot] [Patch v2 8/9] [omap3][overo] Allow overo to boot with device tree   Ash Charles
      • [U-Boot] [U-Boot, v2, 8/9, omap3, overo] Allow overo to boot with device tree   Tom Rini
      • [U-Boot] [Patch v2 9/9] omap3: overo: Use common configurations for Overo   Ash Charles
      • [U-Boot] [U-Boot, v2, 9/9] omap3: overo: Use common configurations for Overo   Tom Rini
• [U-Boot] [PATCH] Prevent a buffer overflow in mkimage when signing with SHA256   Simon Glass
  • [U-Boot] [PATCH] arm:board:exynos4: add CONFIG_SYS_GENERIC_BOARD   Piotr Wilczek
  • [U-Boot] [PATCH] arm:board:exynos4: add CONFIG_SYS_GENERIC_BOARD   Minkyu Kang
• [U-Boot] [ppc] qemu-ppce500 howto   Alon Bar-Lev
  • [U-Boot] [PATCH 1/1] am33xx: report silicon revision instead of code   Sergey Alyoshin
  • [U-Boot] [U-Boot, 1/1] am33xx: report silicon revision instead of code   Tom Rini
• [U-Boot] [ppc] qemu-ppce500 howto   Alexander Graf
  • [U-Boot] [ppc] qemu-ppce500 howto   Alon Bar-Lev
    • [U-Boot] [ppc] qemu-ppce500 howto   Alexander Graf
      • [U-Boot] [ppc] qemu-ppce500 howto   Alon Bar-Lev
      • [U-Boot] [PATCH 0/3] ARM: DRA72x: Add CPSW Ethernet support for DRA72x SoC   Mugunthan V N
      • [U-Boot] [PATCH 2/3] ARM: DRA7xx: Add cpsw second port pinmux   Mugunthan V N
      • [U-Boot] [PATCH 3/3] ARM: dra7_evm: Add Ethernet support for dra72x platform   Mugunthan V N
      • [U-Boot] [PATCH 0/3] ARM: DRA72x: Add CPSW Ethernet support for DRA72x SoC   Mugunthan V N
      • [U-Boot] [PATCH 0/3] ARM: DRA72x: Add CPSW Ethernet support for DRA72x SoC   Tom Rini
      • [U-Boot] [PATCH 1/3] drivers: net: cpsw: add support for using second port as ethernet   Mugunthan V N
      • [U-Boot] [PATCH v2 0/2] Introduction of new board Peach-Pit   Akshay Saraswat
      • [U-Boot] [PATCH v2 1/2] Exynos5420: Introduce support for the Peach-Pit board   Akshay Saraswat
      • [U-Boot] [PATCH v2 1/2] Exynos5420: Introduce support for the Peach-Pit board   Simon Glass
      • [U-Boot] [PATCH v2 2/2] Exynos5420: Let macros be used for exynos5420   Akshay Saraswat
      • [U-Boot] [PATCH v2 0/2] Introduction of new board Peach-Pit   Simon Glass
      • [U-Boot] [PATCH] powerpc/t2080: add serdes2 protocol 0x27   Shengzhou Liu
      • [U-Boot] [PATCH 0/4] Exynos5: Update dmc init   Akshay Saraswat
      • [U-Boot] [PATCH 1/4] Exynos5: DMC: Modify the definition of ddr3_mem_ctrl_init   Akshay Saraswat
      • [U-Boot] [PATCH 1/4] Exynos5: DMC: Modify the definition of ddr3_mem_ctrl_init   Simon Glass
      • [U-Boot] [PATCH 2/4] Exynos5420: Remove code for enabling read leveling   Akshay Saraswat
      • [U-Boot] [PATCH 2/4] Exynos5420: Remove code for enabling read leveling   Simon Glass
      • [U-Boot] [PATCH 3/4] DMC: exynos5420: Gate CLKM to when reading PHY_CON13   Akshay Saraswat
      • [U-Boot] [PATCH 3/4] DMC: exynos5420: Gate CLKM to when reading PHY_CON13   Simon Glass
      • [U-Boot] [PATCH 4/4] Exynos5420: DMC: Add software read leveling   Akshay Saraswat
      • [U-Boot] [PATCH 4/4] Exynos5420: DMC: Add software read leveling   Simon Glass
  • [U-Boot] Build problem - ppmc7xx configuration   Vasili Galka
    • [U-Boot] Build problem - ppmc7xx configuration   Wolfgang Denk
      • [U-Boot] Build problem - ppmc7xx configuration   Tom Rini
      • [U-Boot] Build problem - ppmc7xx configuration   Vasili Galka
      • [U-Boot] Build problem - ppmc7xx configuration   Vasili Galka
      • [U-Boot] [RFC, PATCH v2 0/4] mtd, ubi, ubifs: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 4/4] mtd, ubi, ubifs: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC,PATCH v2 1/4] dm: rename device struct to udevice   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Simon Glass
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Jon Loeliger
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Tom Rini
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Simon Glass
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Simon Glass
      • [U-Boot] [RFC, PATCH v2 1/4] dm: rename device struct to udevice   Tom Rini
      • [U-Boot] [RFC,PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Marek Vasut
      • [U-Boot] [RFC, PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Marek Vasut
      • [U-Boot] [RFC, PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Tom Rini
      • [U-Boot] [RFC, PATCH v2 2/4] lib, rbtree: resync with Linux-3.14   Heiko Schocher
      • [U-Boot] [RFC, PATCH v2 3/4] lib, list_sort: add list_sort from linux 3.14   Heiko Schocher
• [U-Boot] [PATCH v2] mmc: postponed needless timer initialization   Lukasz Majewski
  • [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Lukasz Majewski
  • [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Simon Glass
  • [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Lukasz Majewski
  • [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Stephen Warren
  • [U-Boot] [PATCH] Exynos: Make sure ps_hold gets set in the SPL   Akshay Saraswat
  • [U-Boot] [PATCH] Exynos: Make sure ps_hold gets set in the SPL   Simon Glass
  • [U-Boot] [PATCH] doc:git-mailrc: Add entry for dfu subsystem   Lukasz Majewski
  • [U-Boot] doc:git-mailrc: Add entry for dfu subsystem   Tom Rini
  • [U-Boot] [PATCH v2] esdhc/usdhc: Fix PIO mode bug in fsl_esdhc driver   Pantelis Antoniou
  • [U-Boot] [PATCH v3: DNS320 support 0/4] Add a new kirkwook board   Bastien ROUCARIÈS
  • [U-Boot] [PATCH v3: DNS320 support 1/4] kirkwood: Rename dns325 to dnskw   Bastien ROUCARIÈS
  • [U-Boot] [PATCH v3: DNS320 support 2/4] kirkwood: Add support for the D-Link DNS-320   Bastien ROUCARIÈS
  • [U-Boot] [PATCH v3: DNS320 support 3/4] kirkwood: Set unused SD pins back to GPIO for DNS-320 & DNS-325   Bastien ROUCARIÈS
  • [U-Boot] [PATCH v3: DNS320 support 4/4] kirkwood: Shorten DNS-325 IDENT_STRING to match DNS-320   Bastien ROUCARIÈS
  • [U-Boot] [PATCH v3: DNS320 support 0/4] Add a new kirkwook board   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH] powerpc/mpc85xx: Add workaround for DDR erratum A004508   York Sun
• [U-Boot] [RFC] tools/env: add support for ubi volume chardev   Daniel Golle
  • [U-Boot] Standalone application issue.   mazen.e
    • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] Standalone application issue.   Rommel G Custodio
      • [U-Boot] Standalone application issue.   Wolfgang Denk
      • [U-Boot] Standalone application issue.   Rommel G Custodio
      • [U-Boot] Standalone application issue.   Jeroen Hofstee
      • [U-Boot] Standalone application issue.   mazen.e
      • [U-Boot] [PATCH] Add board_mmc_init(...) function for init mmc1 only   Pantelis Antoniou
      • [U-Boot] [PATCH v2] mmc: postponed needless timer initialization   Pantelis Antoniou
      • [U-Boot] [PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector   Pantelis Antoniou
      • [U-Boot] [PATCH v2] mmc: Handle switch error status bit in MMC card status   Pantelis Antoniou
      • [U-Boot] [PATCH V5 1/3] eMMC: add support for operations in RPMB partition   Pantelis Antoniou
      • [U-Boot] [PATCH V5 2/3] Add the function 'confirm_yesno' for interactive   Pantelis Antoniou
      • [U-Boot] Pull request: u-boot-mmc 23052014   Pantelis Antoniou
      • [U-Boot] [PATCH] esdhc/usdhc: Fix warning when CONFIG_SYS_FSL_ESDHC_USE_PIO is not set   Tom Rini
      • [U-Boot] [PATCH] esdhc/usdhc: Fix warning when CONFIG_SYS_FSL_ESDHC_USE_PIO is not set   Tom Rini
      • [U-Boot] Pull request: u-boot-mmc 23052014   Tom Rini
  • [U-Boot] Uboot-standalone-kernel.   mazen.e
    • [U-Boot] Uboot-standalone-kernel.   Marek Vasut
      • [U-Boot] Uboot-standalone-kernel.   mazen.e
• [U-Boot] [PATCH v3] arm: Add support for semihosting for armv8 fastmodel targets.   bhupesh.sharma at freescale.com
  • [U-Boot] [PATCH v3] arm: Add support for semihosting for armv8 fastmodel targets.   Darwin Rambo
• [U-Boot] [PATCH v2] spi: soft_spi: Support NULL din/dout buffers   Jagan Teki
• [U-Boot] [UBOOT][PATCH] mtd: spi: fix quad bit set path   Jagan Teki
  • [U-Boot] [PATCH] mmc: return meaningful error codes from mmc_select_hwpart   Stephen Warren
  • [U-Boot] [PATCH] mmc: return meaningful error codes from mmc_select_hwpart   Stephen Warren
  • [U-Boot] [PATCH 1/2] cmd_mmc: default to HW partition 0 if not specified   Stephen Warren
  • [U-Boot] [PATCH 1/2] cmd_mmc: default to HW partition 0 if not specified   Stephen Warren
  • [U-Boot] [PATCH 2/2] disk: default to HW partition 0 if not specified   Stephen Warren
  • [U-Boot] [PATCH 1/3] cmd_mmc: add force_init parameter to init_mmc_device()   Stephen Warren
  • [U-Boot] [PATCH 2/3] cmd_mmc: Use init_mmc_device() from do_mmc_rescan()   Stephen Warren
  • [U-Boot] [PATCH 1/3] cmd_mmc: add force_init parameter to init_mmc_device()   Stephen Warren
  • [U-Boot] [PATCH 3/3] cmd_mmc: make mmc dev always re-probe the HW   Stephen Warren
  • [U-Boot] [Patch v2] powerpc/mpc85xx: Add workaround for DDR erratum A004508   York Sun
  • [U-Boot] [PATCH v4] arm: Add support for semihosting for armv8 fastmodel targets.   Darwin Rambo
  • [U-Boot] [U-Boot, 1/3] cm-t54: add EEPROM support and MAC address handling   Tom Rini
  • [U-Boot] [U-Boot, 3/3] cm-t54: add environment partition runtime detection   Tom Rini
    • [U-Boot] [U-Boot, 3/3] cm-t54: add environment partition runtime detection   Igor Grinberg
  • [U-Boot] compulab: eeprom: enable any i2c driver   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/9] fdt_support: delete unnecessary DECLARE_GLOBAL_DATA_PTR   Simon Glass
  • [U-Boot] [PATCH v2 2/9] fdt_support: refactor with fdt_find_or_add_subnode helper func   Simon Glass
• [U-Boot] [PATCH v2 3/9] fdt_support: delete force argument of fdt_initrd()   Simon Glass
• [U-Boot] [PATCH v2 4/9] fdt_support: delete force argument of fdt_chosen()   Simon Glass
  • [U-Boot] [PATCH v2 5/9] fdt_support: refactor fdt_fixup_stdout() function   Simon Glass
    • [U-Boot] [PATCH v2 6/9] fdt_support: add 'const' qualifier for unchanged argument   Simon Glass
• [U-Boot] [PATCH v2 7/9] fdt_support: fix an endian bug of fdt_fixup_memory_banks   Simon Glass
  • [U-Boot] [PATCH v2 8/9] fdt_support: fix an endian bug of fdt_initrd()   Simon Glass
• [U-Boot] [PATCH v2 9/9] fdt_support: correct the return condition of fdt_initrd()   Simon Glass
  • [U-Boot] [PATCH 0/4] Fix a few problems with the command parsers   Simon Glass
  • [U-Boot] [PATCH 1/4] Add final result tests for run_command_list()   Simon Glass
  • [U-Boot] [PATCH 2/4] Fix itest mask overflow   Simon Glass
  • [U-Boot] [PATCH 3/4] Fix hush to give the correct return code for a simple command   Simon Glass
  • [U-Boot] [PATCH 3/4] Fix hush to give the correct return code for a simple command   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 4/4] Correct return code from builtin_run_command_list()   Simon Glass
  • [U-Boot] [PATCH 0/4] Fix a few problems with the command parsers   Tom Rini
  • [U-Boot] [PATCH 0/4] Fix a few problems with the command parsers   Simon Glass
  • [U-Boot] [PATCH] ARC: enable CONFIG_SYS_BOOT_RAMDISK_HIGH   Alexey Brodkin
  • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] spi_flash_probe returns zero idcodes and hangs   Amit Mahadik
• [U-Boot] spi_flash_probe returns zero idcodes and hangs   Amit Mahadik
  • [U-Boot] spi_flash_probe returns zero idcodes and hangs   Jagan Teki
    • [U-Boot] spi_flash_probe returns zero idcodes and hangs   Jon Loeliger
• [U-Boot] [PATCH v2 2/2] lsxl: rework boot scripts   Michael Walle
  • [U-Boot] spi_flash_probe returns zero idcodes and hangs   Jagan Teki
    • [U-Boot] [RFC PATCH 0/22] Introduce driver model serial uclass   Simon Glass
    • [U-Boot] [RFC PATCH 01/22] stdio: Remove redundant code around stdio_register() calls   Simon Glass
    • [U-Boot] [RFC PATCH 02/22] stdio: Pass device pointer to stdio methods   Simon Glass
    • [U-Boot] [RFC PATCH 03/22] dm: Make sure that the root device is probed   Simon Glass
    • [U-Boot] [RFC PATCH 04/22] dm: Provide a way to shut down driver model   Simon Glass
    • [U-Boot] [RFC PATCH 05/22] sandbox: Remove all drivers before exit   Simon Glass
    • [U-Boot] [RFC PATCH 05/22] sandbox: Remove all drivers before exit   Jon Loeliger
    • [U-Boot] [RFC PATCH 05/22] sandbox: Remove all drivers before exit   Simon Glass
    • [U-Boot] [RFC PATCH 06/22] dm: Tidy up four minor code nits   Simon Glass
    • [U-Boot] [RFC PATCH 07/22] dm: Allow drivers to be marked 'before relocation'   Simon Glass
    • [U-Boot] [RFC PATCH 07/22] dm: Allow drivers to be marked 'before relocation'   Jon Loeliger
    • [U-Boot] [RFC PATCH 07/22] dm: Allow drivers to be marked 'before relocation'   Simon Glass
    • [U-Boot] [RFC PATCH 08/22] dm: Use '*' to indicate a device is activated   Simon Glass
    • [U-Boot] [RFC PATCH 08/22] dm: Use '*' to indicate a device is activated   Jon Loeliger
    • [U-Boot] [RFC PATCH 08/22] dm: Use '*' to indicate a device is activated   Simon Glass
    • [U-Boot] [RFC PATCH 09/22] Remove form-feeds from dlmalloc.c   Simon Glass
    • [U-Boot] [RFC PATCH 09/22] Remove form-feeds from dlmalloc.c   Jon Loeliger
    • [U-Boot] [RFC PATCH 10/22] Add a simple malloc() implementation for pre-relocation   Simon Glass
    • [U-Boot] [RFC PATCH 11/22] sandbox: config: Enable pre-relocation malloc()   Simon Glass
    • [U-Boot] [RFC PATCH 12/22] dm: Support driver model prior to relocation   Simon Glass
    • [U-Boot] [RFC PATCH 13/22] stdio: Provide functions to add/remove devices using stdio_dev   Simon Glass
    • [U-Boot] [RFC PATCH 14/22] console: Remove vprintf() optimisation for sandbox   Simon Glass
    • [U-Boot] [RFC PATCH 15/22] Add a flag indicating when the serial console is ready   Simon Glass
    • [U-Boot] [RFC PATCH 16/22] dm: Add a way to indicate a preferred device within a uclass   Simon Glass
    • [U-Boot] [RFC PATCH 16/22] dm: Add a way to indicate a preferred device within a uclass   Jon Loeliger
    • [U-Boot] [RFC PATCH 16/22] dm: Add a way to indicate a preferred device within a uclass   Simon Glass
    • [U-Boot] [RFC PATCH 17/22] dm: Expand and improve the device lifecycle docs   Simon Glass
    • [U-Boot] [RFC PATCH 17/22] dm: Expand and improve the device lifecycle docs   Jon Loeliger
    • [U-Boot] [RFC PATCH 17/22] dm: Expand and improve the device lifecycle docs   Simon Glass
    • [U-Boot] [RFC PATCH 17/22] dm: Expand and improve the device lifecycle docs   Jon Loeliger
    • [U-Boot] [RFC PATCH 17/22] dm: Expand and improve the device lifecycle docs   Simon Glass
    • [U-Boot] [RFC PATCH 18/22] dm: Add a uclass for serial devices   Simon Glass
    • [U-Boot] [RFC PATCH 19/22] Set up stdio earlier when using driver model   Simon Glass
    • [U-Boot] [RFC PATCH 20/22] sandbox: Convert serial driver to use driver model   Simon Glass
    • [U-Boot] [RFC PATCH 21/22] sandbox: serial: Support a coloured console   Simon Glass
    • [U-Boot] [RFC PATCH 22/22] sandbox: dts: Add a serial console node   Simon Glass
• [U-Boot] [RESEND][PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation   Axel Lin
• [U-Boot] spi_flash_probe returns zero idcodes and hangs   Amit Mahadik
• [U-Boot] [PATCH 2/3] env_mmc: support env partition setup in runtime   Igor Grinberg
  • [U-Boot] [PATCH 2/3] env_mmc: support env partition setup in runtime   Tom Rini
  • [U-Boot] [ppc] qemu-ppce500 howto   Alexander Graf
  • [U-Boot] [ppc] qemu-ppce500 howto   Alon Bar-Lev
  • [U-Boot] [ppc] qemu-ppce500 howto   Alexander Graf
  • [U-Boot] [Patch v2 1/5] Added 64-bit MMIO accessors for ARMv8   Albert ARIBAUD
  • [U-Boot] [Patch v2 3/5] ARMv8/ls2100a_emu: Add LS2100A emulator board support   Albert ARIBAUD
    • [U-Boot] [Patch v2 3/5] ARMv8/ls2100a_emu: Add LS2100A emulator board support   York Sun
  • [U-Boot] [PATCH v2 1/2] lsxl: use 64bit for LBA48 to support 4 TB drives   Albert ARIBAUD
  • [U-Boot] [PATCH v2 2/2] lsxl: rework boot scripts   Albert ARIBAUD
  • [U-Boot] [PATCH] ARM: highbank: convert to generic board   Albert ARIBAUD
  • [U-Boot] [PATCH] Arm64 fix a bug of vbar_el3 initialization   Albert ARIBAUD
  • [U-Boot] [PATCH v5] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Albert ARIBAUD
    • [U-Boot] [PATCH v5] arm: ep9315: Return back Cirrus Logic EDB9315A board support   sergey kostanbaev
  • [U-Boot] [PATCH] arm: vf610: add DDR_SEL_PAD_CONTR register   Albert ARIBAUD
  • [U-Boot] [PATCH] boards.cfg: update highbank maintainer email   Albert ARIBAUD
  • [U-Boot] [PATCH v4 00/10] ARMv7: add PSCI support to U-Boot   Albert ARIBAUD
• [U-Boot] LAN9500 Ethernet driver support in u-boot   Ravikumar Rajam
• [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
  • [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support   Chin Liang See
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] xilinx-u-boot:- NAND: no devices available   Uzair Zaidi
  • [U-Boot] Fwd: xilinx-u-boot:- NAND: no devices available   Uzair Zaidi
  • [U-Boot] xilinx-u-boot:- NAND: no devices available   Michal Simek
• [U-Boot] pxa310 SDHC support.   aking_jin
  • [U-Boot] pxa310 SDHC support.   Marek Vasut
    • [U-Boot] pxa310 SDHC support.   aking_jin
    • [U-Boot] pxa310 SDHC support.   aking_jin
      • [U-Boot] pxa310 SDHC support.   Marek Vasut
      • [U-Boot] pxa310 SDHC support.   aking
      • [U-Boot] pxa310 SDHC support.   Marek Vasut
      • [U-Boot] pxa310 SDHC support.   aking
      • [U-Boot] pxa310 SDHC support.   Marek Vasut
      • [U-Boot] pxa310 SDHC support.   aking_jin
      • [U-Boot] pxa310 SDHC support.   Marek Vasut
      • [U-Boot] pxa310 SDHC support.   aking
      • [U-Boot] pxa310 SDHC support.   Marek Vasut
• [U-Boot] pxa310 SDHC support.   aking_jin
  • [U-Boot] [PATCH v2] fat: Define MAX_CLUSTSIZE only if not defined in config   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v2] fat: Define MAX_CLUSTSIZE only if not defined in config   Michal Simek
  • [U-Boot] [PATCH] boards.cfg: fix a configuration error of ep8248 board again   Masahiro Yamada
  • [U-Boot] [PATCH] arm: fix a build error with CONFIG_USE_IRQ   Masahiro Yamada
• [U-Boot] Some powerpc cfgs fail to build on v2014.04   Vasili Galka
  • [U-Boot] Some powerpc cfgs fail to build on v2014.04   Masahiro Yamada
    • [U-Boot] Some powerpc cfgs fail to build on v2014.04   Vasili Galka
      • [U-Boot] [PATCH v2] Prevent a buffer overflow in mkimage when signing with SHA256   Michael van der Westhuizen
      • [U-Boot] [PATCH v2] Prevent a buffer overflow in mkimage when signing with SHA256   Simon Glass
      • [U-Boot] [PATCH v2] Prevent a buffer overflow in mkimage when signing with SHA256   Michael van der Westhuizen
      • [U-Boot] [PATCH v3] Prevent a buffer overflow in mkimage when signing with SHA256   michael at smart-africa.com
      • [U-Boot] [PATCH v3] Prevent a buffer overflow in mkimage when signing with SHA256   Simon Glass
      • [U-Boot] [PATCH v2 1/2] Exynos5420: Introduce support for the Peach-Pit board   Akshay Saraswat
      • [U-Boot] [PATCH v2 1/2] Exynos5420: Introduce support for the Peach-Pit board   Simon Glass
      • [U-Boot] [PATCH 2/4] Exynos5420: Remove code for enabling read leveling   Akshay Saraswat
      • [U-Boot] [PATCH] Exynos: Make sure ps_hold gets set in the SPL   Akshay Saraswat
      • [U-Boot] [PATCH] Exynos: Make sure ps_hold gets set in the SPL   Simon Glass
      • [U-Boot] [PATCH v3 0/2] Introduction of new board Peach-Pit   Akshay Saraswat
      • [U-Boot] [PATCH v3 1/2] Exynos5420: Let macros be used for exynos5420   Akshay Saraswat
      • [U-Boot] [PATCH v3 2/2] Exynos5420: Introduce support for the Peach-Pit board   Akshay Saraswat
      • [U-Boot] [PATCH v2 0/4] Exynos5: Update dmc init   Akshay Saraswat
      • [U-Boot] [PATCH v2 1/4] Exynos5: DMC: Modify the definition of ddr3_mem_ctrl_init   Akshay Saraswat
      • [U-Boot] [PATCH v2 2/4] Exynos5420: Remove code for enabling read leveling   Akshay Saraswat
      • [U-Boot] [PATCH v3] fat: Define MAX_CLUSTSIZE using CONFIG_FS_FAT_MAX_CLUSTSIZE   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH v3] fat: Define MAX_CLUSTSIZE using CONFIG_FS_FAT_MAX_CLUSTSIZE   Michal Simek
      • [U-Boot] [PATCH v2 3/4] DMC: exynos5420: Gate CLKM to when reading PHY_CON13   Akshay Saraswat
      • [U-Boot] [PATCH v2 4/4] Exynos5420: DMC: Add software read leveling   Akshay Saraswat
      • [U-Boot] [PATCH v2 4/4] Exynos5420: DMC: Add software read leveling   Simon Glass
      • [U-Boot] [PATCH v2] Exynos: Make sure ps_hold gets set in the SPL   Akshay Saraswat
      • [U-Boot] [PATCH v2] Exynos: Make sure ps_hold gets set in the SPL   Minkyu Kang
• [U-Boot] [PATCH] Implement generalised RSA public exponents for verified boot   Michael van der Westhuizen
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   michael at smart-africa.com
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Simon Glass
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Michael van der Westhuizen
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Simon Glass
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Michael van der Westhuizen
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Simon Glass
  • [U-Boot] [PATCH v2] Implement generalised RSA public exponents for verified boot   Michael van der Westhuizen
  • [U-Boot] [PATCH v2] env_eeprom: Assign default environment during board_init_f   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH v2] env_eeprom: Assign default environment during board_init_f   Michal Simek
  • [U-Boot] [PATCH 0/3] EFI Partition handling   Steve Rae
  • [U-Boot] [PATCH 1/3] disk: part_efi: resolve endianness issues   Steve Rae
  • [U-Boot] [PATCH 2/3] disk: part_efi: clarify lbaint_t usage   Steve Rae
  • [U-Boot] [PATCH 3/3] disk: part_efi: add get_partition_info_efi_by_name()   Steve Rae
  • [U-Boot] [PULL] u-boot-avr32/master -> u-boot/master   Andreas Bießmann
  • [U-Boot] [PATCH] i2c: kona: Resolve Kona I2C driver issue   Steve Rae
  • [U-Boot] [PATCH] mmc: free allocated memory on initialization errors   Darwin Rambo
  • [U-Boot] [PATCH] macb: make checkpatch clean   Andreas Bießmann
  • [U-Boot] [PATCH] macb: make checkpatch clean   Josh Wu
  • [U-Boot] [U-Boot,1/2] ARM: atmel: switch to main crystal osc for SPL boot   Andreas Bießmann
  • [U-Boot] [U-Boot,2/2] ARM: atmel: enable SPL on sama5d3_xplained board   Andreas Bießmann
  • [U-Boot] [U-Boot,1/4] ARM: atmel: sama5d3xek: convert to generic board   Andreas Bießmann
  • [U-Boot] [U-Boot,2/4] ARM: atmel: sama5d3_xplained: convert to generic board   Andreas Bießmann
  • [U-Boot] [U-Boot,3/4] ARM: atmel: at91sam9m10g45ek: convert to generic board   Andreas Bießmann
  • [U-Boot] [U-Boot,4/4] ARM: atmel: at91sam9x5ek: convert to generic board   Andreas Bießmann
  • [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
  • [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] [PATCH] arm: fix a double-definition error of _start symbol   Masahiro Yamada
  • [U-Boot] bootfile environment variable   l3iggs .
    • [U-Boot] [RFCv2a PATCH 0/14] Kconfig for U-Boot   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 01/14] kconfig: import Kconfig files from Linux v3.15-rc7   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 03/14] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 02/14] Do not apply: tools: add genkconfig   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 04/14] kconfig: add basic Kconfig files   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 05/14] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 06/14] kconfig: switch to Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 07/14] MAKEALL: adjust for Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 08/14] buildman: adjust for Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 09/14] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 10/14] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 11/14] kconfig: remove old script   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 12/14] build: split CONFIG_SPL_TEXT_BASE into two different macros   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 13/14] kconfig: move CONFIG_{SPL, TPL}_TEXT_BASE to Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2a PATCH 14/14] build: remove CONFIG_{SPL, TPL}_TEXT_BASE from config headers   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 0/14] Kconfig for U-Boot   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 01/14] kconfig: import Kconfig files from Linux v3.15-rc7   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 02/14] Do not apply: tools: add genkconfig   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 03/14] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 04/14] kconfig: add basic Kconfig files   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 05/14] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 06/14] kconfig: switch to Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 07/14] MAKEALL: adjust for Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 08/14] buildman: adjust for Kconfig   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 09/14] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 10/14] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 11/14] kconfig: remove old script   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 12/14] split CONFIG_SPL_TEXT_BASE and CONFIG_TPL_TEXT_BASE   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 13/14] move CONFIG_{SPL, TPL}_TEXT_BASE to defconfig   Masahiro Yamada
    • [U-Boot] [RFCv2b PATCH 14/14] remove CONFIG_{SPL, TPL}_TEXT_BASE from config headers   Masahiro Yamada
• [U-Boot] [RFC] Two sets of experimental Kconfig patches   Masahiro Yamada
  • [U-Boot] [RFC] Two sets of experimental Kconfig patches   Tom Rini
  • [U-Boot] Statically allocate a range of physical memory to an OS image.   mazen.e
    • [U-Boot] Statically allocate a range of physical memory to an OS image.   Wolfgang Denk
      • [U-Boot] Statically allocate a range of physical memory to an OS image.   mazen.e
      • [U-Boot] Statically allocate a range of physical memory to an OS image.   Wolfgang Denk
      • [U-Boot] Statically allocate a range of physical memory to an OS image.   mazen.e
• [U-Boot] [RFC] Moving boards without maintainers to Orphan   Masahiro Yamada
• [U-Boot] U-boot hangs on imx6 pci driver   Fabio Estevam
  • [U-Boot] U-boot hangs on imx6 pci driver   Marek Vasut
    • [U-Boot] U-boot hangs on imx6 pci driver   "David Müller (ELSOFT AG)"
      • [U-Boot] U-boot hangs on imx6 pci driver   Marek Vasut
      • [U-Boot] U-boot hangs on imx6 pci driver   "David Müller (ELSOFT AG)"
      • [U-Boot] U-boot hangs on imx6 pci driver   Fabio Estevam
      • [U-Boot] U-boot hangs on imx6 pci driver   "David Müller (ELSOFT AG)"
      • [U-Boot] U-boot hangs on imx6 pci driver   Fabio Estevam
      • [U-Boot] U-boot hangs on imx6 pci driver   Marek Vasut
• [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Pavel Machek
  • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Detlev Zundel
    • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Pavel Machek
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Detlev Zundel
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Pavel Machek
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Detlev Zundel
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Pavel Machek
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Wolfgang Denk
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Pavel Machek
      • [U-Boot] [PATCH v2] Separate EBV Socrates board from Altera Cyclone 5 board and from Virtual Target   Detlev Zundel
      • [U-Boot] [PATCH] FDT: Fix DTC repository references   Jon Loeliger
    • [U-Boot] [ANN] U-Boot v2014.07-rc2 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2014.07-rc2 released   Simon Glass
      • [U-Boot] [ANN] U-Boot v2014.07-rc2 released   Tom Rini
  • [U-Boot] please pull u-boot-arc master   Alexey Brodkin
    • [U-Boot] please pull u-boot-arc master   Tom Rini
    • [U-Boot] [PATCH v2 1/2] Exynos5420: Introduce support for the Peach-Pit board   Akshay Saraswat
• [U-Boot] Howto u-boot an evk1100 ?   Sril
  • [U-Boot] Howto u-boot an evk1100 ?   Andreas Bießmann
    • [U-Boot] Howto u-boot an evk1100 ?   Sril
      • [U-Boot] Howto u-boot an evk1100 ?   Andreas Bießmann
      • [U-Boot] Howto u-boot an evk1100 ?   Sril
• [U-Boot] [PATCH v3 1/3] dts: re-write dts/Makefile more simply with Kbuild   York Sun
  • [U-Boot] [PATCH v3 1/3] dts: re-write dts/Makefile more simply with Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v2] Prevent a buffer overflow in mkimage when signing with SHA256   Simon Glass
• [U-Boot] [PATCH v4] arm: Add support for semihosting for armv8 fastmodel targets.   Sakar.Arora at freescale.com
• [U-Boot] [PATCH v4] arm: Add support for semihosting for armv8 fastmodel targets.   Sakar.Arora at freescale.com
  • [U-Boot] [PATCH] powerpc/serdes: Add the workaround for erratum A-007186   Shaveta Leekha
  • [U-Boot] [PATCH v5 0/4] mpc8313: ids8313 board updates   Heiko Schocher
  • [U-Boot] [PATCH v5 1/4] bootm: make use of legacy image format configurable   Heiko Schocher
  • [U-Boot] [PATCH v5 1/4] bootm: make use of legacy image format configurable   Simon Glass
  • [U-Boot] [PATCH v5 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Heiko Schocher
  • [U-Boot] [PATCH v5 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Simon Glass
  • [U-Boot] [PATCH v5 2/4] mpc8313, signed fit: enable legacy image format on ids8313 board   Simon Glass
  • [U-Boot] [PATCH v5 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Heiko Schocher
  • [U-Boot] [PATCH v5 3/4] lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c   Simon Glass
  • [U-Boot] [PATCH v5 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Heiko Schocher
  • [U-Boot] [PATCH v5 4/4] mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board   Simon Glass
  • [U-Boot] [PATCH v1 0/4] arm, imx6: add aristainetos board support   Heiko Schocher
  • [U-Boot] [PATCH v1 1/4] arm, imx6: add mxc_iomux_set_gpr_register function   Heiko Schocher
  • [U-Boot] [PATCH v1 2/4] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
  • [U-Boot] [PATCH v1 2/4] spi, spi_mxc: do not hang in spi_xchg_single   Jagan Teki
  • [U-Boot] [PATCH v1 2/4] spi, spi_mxc: do not hang in spi_xchg_single   Dirk Behme
  • [U-Boot] [PATCH v1 2/4] spi, spi_mxc: do not hang in spi_xchg_single   Heiko Schocher
  • [U-Boot] [PATCH v1 3/4] i.MX6: add enable_spi_clk()   Heiko Schocher
  • [U-Boot] [PATCH v1 4/4] arm, imx6: add aristainetos board   Heiko Schocher
• [U-Boot] Protected variable 'ethaddr' can be reset to default value (or deleted)   Hector Palacios
  • [U-Boot] [PATCH v2 0/11] Kconfig for U-Boot   Masahiro Yamada
  • [U-Boot] [PATCH v2 01/11] kconfig: import Kconfig files from Linux v3.15-rc7   Masahiro Yamada
  • [U-Boot] [PATCH v2 03/11] kconfig: add board Kconfig and defconfig files   Masahiro Yamada
  • [U-Boot] [PATCH v2 02/11] Do not apply: tools: add genkconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 04/11] kconfig: add basic Kconfig files   Masahiro Yamada
  • [U-Boot] [PATCH v2 05/11] include: define CONFIG_SPL and CONFIG_TPL as 1   Masahiro Yamada
  • [U-Boot] [PATCH v2 06/11] kconfig: switch to Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 07/11] MAKEALL: adjust for Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 08/11] buildman: adjust for Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 09/11] kconfig: delete redundant CONFIG_${ARCH} definition   Masahiro Yamada
  • [U-Boot] [PATCH v2 10/11] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers   Masahiro Yamada
  • [U-Boot] [PATCH v2 11/11] kconfig: remove old script   Masahiro Yamada
• [U-Boot] [PATCH v2] spl: consolidate arch/arm/include/asm/arch-*/spl.h   Stefano Babic
  • [U-Boot] Some Driver Model Ponderings   Jon Loeliger
    • [U-Boot] Command repeat   Thomas.Betker at rohde-schwarz.com
    • [U-Boot] Command repeat   Tom Rini
    • [U-Boot] Command repeat   Simon Glass
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Jaehoon Chung
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Jaehoon Chung
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Stephen Warren
    • [U-Boot] [PATCH 1/2] arm: rmobile: lager: Remove NOR-Flash support from boards.cfg   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/2] arm: rmobile: koelsch: Remove NOR-Flash support from boards.cfg   Nobuhiro Iwamatsu
    • [U-Boot] [Patch v3 1/4] Added 64-bit MMIO accessors for ARMv8   York Sun
    • [U-Boot] [Patch v3 2/4] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   York Sun
    • [U-Boot] [Patch v3 2/4] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   Rob Herring
    • [U-Boot] [Patch v3 3/4] armv8/fsl-lsch3: Add support to load and start MC Firmware   York Sun
    • [U-Boot] [Patch v3 4/4] ARMv8/ls2100a_emu: Add LS2100A emulator and simulator board support   York Sun
    • [U-Boot] [PATCH] zynq: disable -Wstrict-prototypes option for ps7_init.c   Masahiro Yamada
    • [U-Boot] [PATCH] zynq: disable -Wstrict-prototypes option for ps7_init.c   Michal Simek
• [U-Boot] Please pick up the maintainership on orphan boards   Masahiro Yamada
  • [U-Boot] Please pick up the maintainership on orphan boards   Minkyu Kang
    • [U-Boot] Please pick up the maintainership on orphan boards   Tushar Behera
    • [U-Boot] Please pick up the maintainership on orphan boards   Linus Walleij
  • [U-Boot] Please pick up the maintainership on orphan boards   Wolfgang Denk
    • [U-Boot] [PATCH v2] zynq: disable -Wstrict-prototypes option for ps7_init.c   Masahiro Yamada
  • [U-Boot] secure embedded linux system   Mahendra Dobariya
    • [U-Boot] secure embedded linux system   Wolfgang Denk
      • [U-Boot] secure embedded linux system   Mahendra Dobariya
      • [U-Boot] secure embedded linux system   Wolfgang Denk
      • [U-Boot] secure embedded linux system   Mahendra Dobariya
      • [U-Boot] secure embedded linux system   Wolfgang Denk
• [U-Boot] [PATCH v3 06/11] mx6: add structs for mmdc and ddr iomux registers   Nikita Kiryanov
  • [U-Boot] [PATCH] PPC4xx: Remove quad100hd board   Wolfgang Denk
• [U-Boot] [Patch v3 2/4] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   York Sun
  • [U-Boot] [Patch v3 2/4] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   Rob Herring
    • [U-Boot] [Patch v3 2/4] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   York Sun
    • [U-Boot] [U-boot] [PATCH] keystone: init: enable UART1 to be able use it from kernel   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [PATCH] keystone: k2hk: enable support of nand ecclayout command   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [PATCH] mtd: nand: davinci: add header file for driver definitions   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [PATCH] mtd: nand: davinci: add header file for driver definitions   Murali Karicheri
    • [U-Boot] [U-boot] [PATCH] ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c   Ivan Khoronzhuk
    • [U-Boot] [PATCH v3] Exynos: Make sure ps_hold gets set in the SPL   Akshay Saraswat
    • [U-Boot] [PATCH v3] Exynos: Make sure ps_hold gets set in the SPL   Minkyu Kang
• [U-Boot] [U-boot] [PATCH] ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c   Murali Karicheri
• [U-Boot] [U-boot] [PATCH] mtd: nand: davinci: add header file for driver definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [PATCH] ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2] mtd: nand: davinci: add header file for driver definitions   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2] ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c   Ivan Khoronzhuk
• [U-Boot] [U-boot] [PATCH] ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c   Ivan Khoronzhuk
• [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
• [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Stephen Warren
• [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
  • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Stephen Warren
    • [U-Boot] [Patch v4 1/5] Added 64-bit MMIO accessors for ARMv8   York Sun
    • [U-Boot] [Patch v4 2/5] ARMv8: Adjust MMU setup   York Sun
    • [U-Boot] [Patch v4 3/5] ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC   York Sun
    • [U-Boot] [Patch v4 4/5] armv8/fsl-lsch3: Add support to load and start MC Firmware   York Sun
    • [U-Boot] [Patch v4 5/5] ARMv8/ls2100a_emu: Add LS2100A emulator and simulator board support   York Sun
    • [U-Boot] [PATCH 1/4] usb: ci_udc: detect queued requests on ep0   Stephen Warren
    • [U-Boot] [PATCH 2/4] usb: ci_udc: use a single descriptor for ep0   Stephen Warren
    • [U-Boot] [PATCH 3/4] usb: ci_udc: pre-allocate ep0 req   Stephen Warren
    • [U-Boot] [PATCH 4/4] usb: ci_udc: complete ep0 direction handling   Stephen Warren
    • [U-Boot] [PATCH V3] ARM: tegra: enable USB device mode and UMS on some boards   Stephen Warren
  • [PATCH 2/2] ARM mxs Fix NAND FCB flashing   Joerg Krause
• [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
  • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Stephen Warren
    • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
      • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Stephen Warren
      • [U-Boot] [PATCH] mmc: add wrappers for MMC block_{read, write, erase}   Steve Rae
      • [U-Boot] [PATCH 1/2] ARM: mxs: Fix NAND FCB flashing   Joerg Krause
      • [U-Boot] [PATCH 1/2] ARM: mxs: Fix NAND FCB flashing   Marek Vasut
• [U-Boot] [ANN] U-Boot v2014.07-rc2 released   Simon Glass
• [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Simon Glass
  • [U-Boot] [PATCH] test:dfu: Add test script for testing DFU regression   Lukasz Majewski
• [U-Boot] smp_kick_all_cpus() function's role   TigerLiu at via-alliance.com
  • [U-Boot] smp_kick_all_cpus() function's role   Marc Zyngier
    • [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support   Alison Wang
    • [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
    • [U-Boot] [PATCH 3/9] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
    • [U-Boot] [PATCH 5/9] arm: ls102xa: Add esdhc support for LS102xA   Alison Wang
    • [U-Boot] [PATCH 6/9] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
    • [U-Boot] [PATCH 7/9] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
    • [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
    • [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board   Fabio Estevam
    • [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board   Otavio Salvador
    • [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support   Andrew Dyer
    • [U-Boot] [PATCH 2/9] arm: ls102xa: Add i2c support for LS102xA   Alison Wang
    • [U-Boot] [PATCH 4/9] arm: ls102xa: Add etsec support for LS102xA   Alison Wang
    • [U-Boot] [PATCH 8/9] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
  • No subject  
  • No subject  
  • No subject  
    • [U-Boot] [PATCH 0/9] Remove MPC82xx, MPC8xx Orphan boards   Masahiro Yamada
    • [U-Boot] [PATCH 2/9] powerpc: mpc8260ads: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 3/9] powerpc: zpc1900: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 4/9] powerpc: rattler: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 5/9] powerpc: ispan: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 6/9] powerpc: ep8248: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 7/9] powerpc: kvme080: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 9/9] powerpc: hiddendragon: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 1/9] powerpc: adder: remove orphan board   Masahiro Yamada
    • [U-Boot] [PATCH 8/9] powerpc: debris: remove orphan board   Masahiro Yamada
    • [U-Boot] sunxi: Bug fixes, sun4i and sun5i support, pmic support and network improvements   Hans de Goede
    • [U-Boot] [PATCH 03/12] sunxi: Remove mmc DMA support   Hans de Goede
    • [U-Boot] [PATCH 03/12] sunxi: Remove mmc DMA support   Ian Campbell
    • [U-Boot] [PATCH 05/12] sunxi: Add sun4i support   Hans de Goede
    • [U-Boot] [PATCH 05/12] sunxi: Add sun4i support   Ian Campbell
    • [U-Boot] [PATCH 07/12] sunxi: Add i2c support   Hans de Goede
    • [U-Boot] [PATCH 07/12] sunxi: Add i2c support   Ian Campbell
    • [U-Boot] [PATCH 08/12] sunxi: Add axp209 pmic support   Hans de Goede
    • [U-Boot] [PATCH 08/12] sunxi: Add axp209 pmic support   Ian Campbell
    • [U-Boot] [PATCH 09/12] sunxi: Add axp152 pmic support   Hans de Goede
    • [U-Boot] [PATCH 09/12] sunxi: Add axp152 pmic support   Ian Campbell
    • [U-Boot] [PATCH 10/12] net: Rename and cleanup sunxi (Allwinner) emac driver   Hans de Goede
    • [U-Boot] [PATCH 10/12] net: Rename and cleanup sunxi (Allwinner) emac driver   Ian Campbell
    • [U-Boot] [PATCH 11/12] sunxi: enable emac for sun4i   Hans de Goede
    • [U-Boot] [PATCH 11/12] sunxi: enable emac for sun4i   Ian Campbell
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Hans de Goede
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Ian Campbell
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Hans de Goede
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Ian Campbell
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Ian Campbell
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Hans de Goede
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Ian Campbell
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Hans de Goede
    • [U-Boot] [PATCH 12/12] sunxi: Add support for using MII phy-s with the GMAC nic   Ian Campbell
    • [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4   Hans de Goede
    • [U-Boot] [PATCH 01/12] sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4   Ian Campbell
    • [U-Boot] [PATCH 02/12] sunxi: Fix u-boot-spl.lds to refer to .vectors   Hans de Goede
    • [U-Boot] [PATCH 02/12] sunxi: Fix u-boot-spl.lds to refer to .vectors   Ian Campbell
    • [U-Boot] [PATCH 04/12] sunxi: Implement reset_cpu   Hans de Goede
    • [U-Boot] [PATCH 04/12] sunxi: Implement reset_cpu   Ian Campbell
    • [U-Boot] [PATCH 04/12] sunxi: Implement reset_cpu   Hans de Goede
    • [U-Boot] [PATCH 06/12] sunxi: Add sun5i support   Hans de Goede
    • [U-Boot] [PATCH 06/12] sunxi: Add sun5i support   Ian Campbell
• [U-Boot] coreboot and u-boot integration x86: "No tick base available"   Martin Ertsås
  • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Rik Smith
    • [U-Boot] [PATCH v2 1/2] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
      • [U-Boot] [PATCH] boards.cfg: move many unmaintained boards to Orphan   Masahiro Yamada
      • [U-Boot] [PATCH] boards.cfg: move many unmaintained boards to Orphan   Wolfgang Denk
      • [U-Boot] [PATCH] boards.cfg: move many unmaintained boards to Orphan   Tom Rini
      • [U-Boot] [PATCH] boards.cfg: move many unmaintained boards to Orphan   Wolfgang Denk
      • [U-Boot] [PATCH 0/4] Fix SPI read and Enable required configs for Exynos5   Akshay Saraswat
      • [U-Boot] [PATCH 1/4] Exynos: SPI: Fix reading data from SPI flash   Akshay Saraswat
      • [U-Boot] [PATCH 2/4] Exynos5: Config: Place environment at the end of SPI Flash   Akshay Saraswat
      • [U-Boot] [PATCH 3/4] Exynos5: Config: Increase SPL footprint for Exynos5420   Akshay Saraswat
      • [U-Boot] [PATCH 4/4] Exynos5: Config: Enable USB boot mode for all Exynos5 SoCs   Akshay Saraswat
      • [U-Boot] [PATCH 0/2] fix building tools on FreeBSD/clang   Jeroen Hofstee
      • [U-Boot] [PATCH 2/2] tools: include u-boot version of sha256.h   Jeroen Hofstee
      • [U-Boot] [PATCH 1/2] Makefile: fix clang warnings due to clang support   Jeroen Hofstee
  • [U-Boot] Exynos DMC register details   Andy Joe
    • [U-Boot] Driver Model and DTS Parsing   Jon Loeliger
• [U-Boot] Return value of run command   Enric Balletbo Serra
  • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] [PATCH 01/14] Remove unnecessary use of hush header file   Tom Rini
  • [U-Boot] [PATCH 02/14] Rename hush to cli_hush   Tom Rini
  • [U-Boot] [PATCH 03/14] move CLI prototypes to cli.h and add comments   Tom Rini
  • [U-Boot] [PATCH 04/14] Split out simple parser and readline into separate files   Tom Rini
  • [U-Boot] [PATCH 05/14] Add cli_ prefix to readline functions   Tom Rini
  • [U-Boot] [PATCH 06/14] Move autoboot code to autoboot.c   Tom Rini
  • [U-Boot] [PATCH 07/14] Move command line API into cli.c   Tom Rini
  • [U-Boot] [PATCH 08/14] Move bootretry code into bootretry.c and clean up   Tom Rini
  • [U-Boot] [PATCH 09/14] Rename bootretry functions and remove #ifdefs   Tom Rini
  • [U-Boot] [PATCH 10/14] m68k: powerpc: Clean up do_mdm_init   Tom Rini
  • [U-Boot] [PATCH 11/14] Simplify the main loop   Tom Rini
  • [U-Boot] [PATCH 12/14] main: Hide the hush/simple details inside cli.c   Tom Rini
  • [U-Boot] [PATCH 13/14] main: Make the execution path a little clearer in main.c   Tom Rini
  • [U-Boot] [PATCH 14/14] main: Avoid unncessary strdup()/free()   Tom Rini
• [U-Boot] Command unit test failure?   Simon Glass
  • [U-Boot] Command unit test failure?   Stephen Warren
    • [U-Boot] Command unit test failure?   Simon Glass
      • [U-Boot] [PATCH]powerpc/B4420: Fixed incomplete handling for 0x9d serdes2   Poonam Aggrwal
  • [U-Boot] Standalone application on secondary cores   Francesco Teodoro
    • [U-Boot] [PATCH v2 0/4] Fix a few problems with the command parsers   Simon Glass
    • [U-Boot] [PATCH v2 1/4] Add final result tests for run_command_list()   Simon Glass
    • [U-Boot] [PATCH v2 2/4] Fix itest mask overflow   Simon Glass
    • [U-Boot] [PATCH v2 3/4] Fix hush to give the correct return code for a simple command   Simon Glass
    • [U-Boot] [PATCH v2 4/4] Correct return code from builtin_run_command_list()   Simon Glass
    • [U-Boot] [PATCH v2 0/4] Fix a few problems with the command parsers   Simon Glass
• [U-Boot] Exynos DMC register details   Simon Glass
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] [PATCH] tam3517: fix NAND detection   Jeroen Hofstee
• [U-Boot] [PATCH 0/5] sunxi: GPIO, AHCI and Cubieboard 2 support.   Ian Campbell
  • [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms   Ian Campbell
  • [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too   Ian Campbell
  • [U-Boot] [PATCH 3/5] sunxi: add Cubieboard2 support   Ian Campbell
  • [U-Boot] [PATCH 4/5] sunxi: add gpio driver   Ian Campbell
  • [U-Boot] [PATCH 5/5] ahci: provide sunxi SATA driver using AHCI platform framework   Ian Campbell
  • [U-Boot] [RFC 00/10] clang support for ARM   Jeroen Hofstee
  • [U-Boot] [RFC 02/10] ARM: omap3/board: add spl specific board_init_f   Jeroen Hofstee
  • [U-Boot] [RFC 03/10] board_r: only assign gd when requested   Jeroen Hofstee
  • [U-Boot] [RFC 05/10] ARM: SPL: do not set gd again   Jeroen Hofstee
  • [U-Boot] [RFC 09/10] eabi_compat: add __aeabi_memcpy __aeabi_memset   Jeroen Hofstee
  • [U-Boot] [RFC 10/10] README.clang: build command with clang   Jeroen Hofstee
  • [U-Boot] [RFC 01/10] ARM: crt0.S: clear the global data   Jeroen Hofstee
  • [U-Boot] [RFC 04/10] ARM: do not set gd in generic board again   Jeroen Hofstee
  • [U-Boot] [RFC 06/10] cc-option: make it work with clang   Jeroen Hofstee
  • [U-Boot] [RFC 07/10] ARM: make gd a function a function for clang   Jeroen Hofstee
  • [U-Boot] [RFC 08/10] inline: use the gcc inline version instead of the c99 one.   Jeroen Hofstee