[U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Tue May 20 10:57:08 CEST 2014
Hello Tom,
The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
+0200)
Note: there still is a Zynq PR pending right now, but I wanted
to get re-synchronized with mainline first; a further PR with Zynq
and individual patches will arrive soon.
----------------------------------------------------------------
Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config
Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-sh/rmobile'
boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'
Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine
Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob
Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image
Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask
Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir
siemens:cosmetic, dxr2: rename dxr2 to draco
siemens, draco: add new target
Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip
RiOTboard and MarSBoard: add new boards support
imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi
embest/mx6boards: use common detect_hdmi
Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit
Inha Song (1):
samsung: misc: add env default option to lcd menu
Jaehoon Chung (1):
ARM: exynos: remove the unused code
Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support
Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update
Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
rmobile_get_cpu_rev_integer() arm: rmobile: Add
rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD
Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen
Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system
Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support
Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller
Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE
Yegor Yefremov (1):
am33xx: add SSC enable macro
Łukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2
Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++--------------
arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} | 12 +-
arch/arm/cpu/armv7/rmobile/cpu_info.c |
49 ++-
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
20 +-
arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
15 +-
arch/arm/cpu/armv7/start.S |
253 +-------------
arch/arm/cpu/armv7/zynq/u-boot.lds
| 2 +-
arch/arm/cpu/pxa/cpuinfo.c
| 6 +
arch/arm/cpu/pxa/start.S |
253 +-------------
arch/arm/cpu/sa1100/cpu.c |
14 +
arch/arm/cpu/sa1100/start.S |
225 +------------
arch/arm/cpu/tegra-common/pinmux-common.c |
19 ++
arch/arm/cpu/u-boot-spl.lds
| 1 +
arch/arm/cpu/u-boot.lds
| 1 +
arch/arm/dts/exynos4210-origen.dts
| 4 +-
arch/arm/dts/exynos4210-trats.dts
| 6 +-
arch/arm/dts/exynos4210-universal_c210.dts
| 4 +-
arch/arm/dts/exynos4412-trats2.dts
| 4 +-
arch/arm/dts/imx6q-sabreauto.dts |
10 +-
arch/arm/imx-common/Makefile
| 1 +
arch/arm/imx-common/iomux-v3.c
| 8 +
arch/arm/imx-common/video.c |
65 ++++
arch/arm/include/asm/arch-am33xx/clock.h
| 2 +
arch/arm/include/asm/arch-exynos/cpu.h |
17 +-
arch/arm/include/asm/arch-exynos/gpio.h |
1761
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
arch/arm/include/asm/arch-mx25/imx-regs.h |
175 ++++++++++
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
| 4 +
arch/arm/include/asm/arch-omap5/clock.h
| 3 +
arch/arm/include/asm/arch-omap5/omap.h
| 1 +
arch/arm/include/asm/arch-rmobile/r8a7790.h |
609 +---------------------------------
arch/arm/include/asm/arch-rmobile/r8a7791.h |
626 +----------------------------------
arch/arm/include/asm/arch-rmobile/rcar-base.h |
637 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-rmobile/rmobile.h
| 6 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
948 ++++++++++++++++++++++++++++++++++++++++++++--------
arch/arm/include/asm/arch-tegra/gpio.h |
20 ++
arch/arm/include/asm/arch-tegra/pinmux.h
| 5 +
arch/arm/include/asm/arch-tegra/tegra_mmc.h
| 2 -
arch/arm/include/asm/arch-tegra114/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra124/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra20/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra30/pinmux.h
| 1 +
arch/arm/include/asm/imx-common/iomux-v3.h
| 5 +
arch/arm/include/asm/imx-common/video.h |
24 ++
arch/arm/lib/Makefile
| 2 +-
arch/arm/lib/cache.c |
13 +-
arch/arm/lib/vectors.S |
291 ++++++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c |
69 +---
board/compulab/cm_t335/u-boot.lds
| 1 +
board/embest/mx6boards/Makefile
| 9 +
board/embest/mx6boards/mx6boards.c |
601 +++++++++++++++++++++++++++++++++
board/freescale/mx31ads/u-boot.lds
| 1 +
board/freescale/mx6sabresd/mx6sabresd.c |
67 +---
board/freescale/mx6slevk/mx6slevk.c |
20 ++
board/gateworks/gw_ventana/gw_ventana.c |
215 ++++++++++--
board/gateworks/gw_ventana/ventana_eeprom.h |
14 +-
board/gumstix/pepper/Makefile |
13 +
board/gumstix/pepper/board.c |
226 +++++++++++++
board/gumstix/pepper/board.h |
19 ++
board/gumstix/pepper/mux.c |
78 +++++
board/nvidia/jetson-tk1/jetson-tk1.c
| 6 +
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
256 +++++++++-----
board/nvidia/venice2/pinmux-config-venice2.h |
567 +++++++++++++++----------------
board/nvidia/venice2/venice2.c |
19 +-
board/renesas/koelsch/koelsch.c |
194 +----------
board/renesas/koelsch/qos.c |
404 ++++++++++++++---------
board/renesas/lager/lager.c |
196 +----------
board/renesas/lager/qos.c |
236 ++++++-------
board/samsung/arndale/arndale.c |
11 +-
board/samsung/common/misc.c |
130 ++++----
board/samsung/goni/goni.c |
32 +-
board/samsung/smdk5250/exynos5-dt.c |
20 +-
board/samsung/smdk5250/smdk5250.c |
19 +-
board/samsung/smdk5420/smdk5420.c |
15 +-
board/samsung/smdkc100/smdkc100.c
| 5 +-
board/samsung/smdkv310/smdkv310.c |
19 +-
board/samsung/trats/trats.c |
39 +--
board/samsung/trats2/trats2.c |
74 ++---
board/samsung/universal_c210/universal.c |
51 ++-
board/siemens/common/board.c |
46 ++- board/siemens/{dxr2 =>
draco}/Makefile | 0 board/siemens/{dxr2
=> draco}/board.c | 112 ++++---
board/siemens/{dxr2 => draco}/board.h |
26 +- board/siemens/{dxr2 =>
draco}/mux.c | 2 +-
board/siemens/pxm2/board.c |
10 +-
board/siemens/rut/board.c
| 2 +-
board/ti/am335x/u-boot.lds
| 1 +
board/wandboard/wandboard.c |
146 ++++++--
boards.cfg
| 9 +-
common/spl/spl_nand.c
| 2 +-
drivers/gpio/s5p_gpio.c |
204 ++++++++++--
drivers/gpio/tegra_gpio.c |
20 ++
drivers/mmc/tegra_mmc.c |
13 +-
drivers/mtd/nand/omap_gpmc.c
| 2 +-
drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_ltc3676.c |
32 ++
drivers/power/pmic/pmic_pfuze100.c
| 2 +-
drivers/video/Makefile
| 1 +
drivers/video/imx25lcdc.c |
121 +++++++
include/configs/beaver.h
| 3 +
include/configs/cardhu.h
| 3 +
include/configs/da850evm.h
| 1 +
include/configs/draco.h |
92 ++++++
include/configs/dxr2.h
| 4 +-
include/configs/embestmx6boards.h |
336 +++++++++++++++++++
include/configs/exynos5-dt.h
| 2 +
include/configs/gw_ventana.h |
20 ++
include/configs/hummingboard.h
| 2 +
include/configs/k2hk_evm.h
| 1 +
include/configs/koelsch.h |
36 +-
include/configs/lager.h |
40 +--
include/configs/m28evk.h
| 1 -
include/configs/mx53ard.h
| 2 +
include/configs/mx53evk.h
| 2 +
include/configs/mx53loco.h
| 2 +
include/configs/mx53smd.h
| 2 +
include/configs/mx6sabre_common.h
| 2 +
include/configs/mx6sabresd.h
| 1 +
include/configs/mx6slevk.h |
12 +
include/configs/mxs.h
| 1 +
include/configs/nitrogen6x.h
| 2 +
include/configs/omap3_beagle.h |
10 +-
include/configs/pepper.h |
99 ++++++
include/configs/pxm2.h
| 2 +-
include/configs/s5p_goni.h
| 4 +-
include/configs/s5pc210_universal.h |
23 +-
include/configs/siemens-am33x-common.h
| 8 +-
include/configs/smdk5250.h
| 4 +
include/configs/smdk5420.h
| 4 +
include/configs/smdkv310.h
| 1 +
include/configs/snow.h
| 4 +
include/configs/tegra-common.h
| 7 +
include/configs/trats.h |
17 +-
include/configs/trats2.h |
17 +-
include/configs/udoo.h
| 2 +
include/configs/wandboard.h |
38 ++-
include/palmas.h
| 4 +
include/power/ltc3676_pmic.h |
51 +++
include/power/pfuze100_pmic.h
| 1 +
include/samsung/misc.h
| 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
100644 arch/arm/lib/vectors.S create mode 100644
board/embest/mx6boards/Makefile create mode 100644
board/embest/mx6boards/mx6boards.c create mode 100644
board/gumstix/pepper/Makefile create mode 100644
board/gumstix/pepper/board.c create mode 100644
board/gumstix/pepper/board.h create mode 100644
board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
(63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
drivers/power/pmic/pmic_ltc3676.c create mode 100644
drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
create mode 100644 include/configs/embestmx6boards.h create mode
100644 include/configs/pepper.h create mode 100644
include/power/ltc3676_pmic.h
Amicalement,
--
Albert.
More information about the U-Boot
mailing list