[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Thu May 22 21:12:01 CEST 2014
On Tue, May 20, 2014 at 10:57:08AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> d7782d06534fe4fa47a49fa7c106de5ba85a9687:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
> 18:30:33 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
>
> Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
> +0200)
>
> Note: there still is a Zynq PR pending right now, but I wanted
> to get re-synchronized with mainline first; a further PR with Zynq
> and individual patches will arrive soon.
>
> ----------------------------------------------------------------
>
> Akshay Saraswat (3):
> Exynos5: config: Enable FIT
> S5P: Exynos: Add GPIO pin numbering and rename definitions
> S5P: Exynos: Config: Enable GPIO CMD config
>
> Albert ARIBAUD (12):
> arm1136: move cache code from start.S to cache.c
> arm: move reset_cpu from start.S into cpu.c
> arm: pxa: move SP check from start.S to cpuinfo.c
> arm: remove unused _end_vect and _vectors_end symbols
> arm: move exception handling out of start.S files
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge remote-tracking branch 'u-boot-sh/rmobile'
> boards.cfg: reformat
> Merge remote-tracking branch 'u-boot/master'
>
> Ash Charles (1):
> am335x: pepper: Add Gumstix Pepper AM335x-based machine
>
> Belisko Marek (1):
> mtd: nand: omap_gpmc: Fix update of read_ecc in oob
>
> Christian Riesch (1):
> arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
> image
>
> Dmitry Lifshitz (3):
> ARM: OMAP5: add UART4 support
> ARM: OMAP5: Power: add LDO2 support for Palmas driver
> ARM: OMAP5: add CKO buffer control mask
>
> Egli, Samuel (7):
> siemens: cosmetic: remove unused and rename defines
> siemens: update DDR3 parameters for dxr2
> siemens: add led cmd for flexible LED control
> siemens: change LED indication in DFU mode
> siemens: cosmetic: rename project_dir
> siemens:cosmetic, dxr2: rename dxr2 to draco
> siemens, draco: add new target
>
> Eric Benard (8):
> imx-common: add board_video_skip
> nitrogen6x: use common board_video_skip
> mx6sabresd: use common board_video_skip
> RiOTboard and MarSBoard: add new boards support
> imx-common/video: add detect_hdmi
> nitrogen6x: use common detect_hdmi
> mx6sabresd: use common detect_hdmi
> embest/mx6boards: use common detect_hdmi
>
> Eric Nelson (1):
> ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
>
> Fabio Estevam (11):
> wandboard: Convert to generic board
> mx53loco: Convert to generic board
> mx6sabre_common: Convert to generic board
> mx53ard: Convert to generic board
> mx53smd: Convert to generic board
> mx53evk: Convert to generic board
> udoo: Convert to generic board
> hummingboard: Convert to generic board
> mx6slevk: Add SPI NOR flash support
> nitrogen6x: Fix the PAD settings for the ECSPI chipselect
> iomux-v3: Add support for mx6sl LVE bit
>
> Inha Song (1):
> samsung: misc: add env default option to lcd menu
>
> Jaehoon Chung (1):
> ARM: exynos: remove the unused code
>
> Khoronzhuk, Ivan (1):
> config: k2hk_evm: Add generic board support
>
> Marek Vasut (1):
> arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
>
> Mateusz Zalega (1):
> ARM: Samsung: s5p_goni: maintainer update
>
> Nobuhiro Iwamatsu (22):
> arm: rmobile: Coordinate the common part of the header file of
> r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
> latency setting arm: rmobile: koelsch: Change name of structure
> arm: rmobile: koelsch: Remove NOR-Flash support
> arm: rmobile: lager: Change name of the structure
> arm: rmobile: lager: Remove NOR-Flash support
> arm: rmobile: Merge functions to get the CPU information of
> R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
> rmobile_get_cpu_rev_integer() arm: rmobile: Add
> rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
> prototype for function to get the CPU information to rmobile.h arm:
> rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
> support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
> arm: rmobile: keolsch: Add support ES2 revision of R8A7791
> arm: rmobile: lager: Update QoS initialization to version 0.955
> arm: rmobile: koelsch: Update QoS initialization
> arm: rmobile: koelsch: Update calculation of
> CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
> regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
> arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
> arm: rmobile: lager: Change to maximum CPU frequency
> arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
>
> Otavio Salvador (2):
> wandboard: add Future Eletronics 7" WVGA LCD extension board
> wandboard: Pass video kernel arguments for HDMI and LCD
>
> Przemyslaw Marczak (4):
> samsung: misc: allows using environmental macros as args in menu
> commands samsung: misc: add gpt restore option to lcd menu
> samsung: misc: menu: increase delay in menu main loop
> samsung: misc: remove download mode info screen
>
> Robert Nelson (2):
> omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
> omap3_beagle: xM A/B validate new dtb exits in file system
>
> Stefano Babic (3):
> mx6: fix weird formatting in imx6q-sabreauto.dts
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> Stephen Warren (10):
> ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
> ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
> ARM: tegra: allow pinmux mux option not to be set by init tables
> ARM: tegra: add GPIO initialization table function
> ARM: tegra: add function to enable input clamping on tristate
> ARM: tegra: make use of GPIO init table on Jetson TK1
> ARM: tegra: clamp inputs on Jetson TK1
> ARM: tegra: update Venice2 pinmux
> ARM: tegra: Venice2 pinmux spreadsheet updates
> ARM: tegra: use a CPU freq that all SKUs can support
>
> Thomas Diener (2):
> imx25: Add new hardware registers
> video: Add support for imx25 lcd controller
>
> Tim Harvey (10):
> ventana: fixed comments in eeprom header
> ventana: remove redundant include
> power: make pfuze100 be able to coexist with other pmics
> ventana: use non-generic pfuze100 init
> power: Add support for LTC3676 PMIC
> ventana: Add support for the LTC3676 PMIC
> imx6: ventana: fix system-serial dt property
> imx: ventana: Convert to generic board
> imx: ventana: add HDMI and LVDS display capability
> nand: remove CONFIG_SYS_NAND_PAGE_SIZE
>
> Yegor Yefremov (1):
> am33xx: add SSC enable macro
>
> Łukasz Majewski (2):
> trats2: config: fix: Set default console to ttySAC2
> trats: config: fix: Set default console to ttySAC2
>
> Makefile
> | 2 +-
> arch/arm/cpu/arm1136/start.S |
> 254 +-------------
> arch/arm/cpu/arm1176/start.S |
> 198 +----------
> arch/arm/cpu/arm720t/start.S |
> 229 +------------
> arch/arm/cpu/arm720t/tegra-common/cpu.c |
> 10 +-
> arch/arm/cpu/arm720t/tegra30/cpu.c |
> 23 +-
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds
> | 3 +-
> arch/arm/cpu/arm920t/start.S |
> 216 +-----------
> arch/arm/cpu/arm926ejs/mxs/start.S |
> 92 +-----
> arch/arm/cpu/arm926ejs/spear/start.S |
> 27 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> | 1 +
> arch/arm/cpu/arm926ejs/start.S |
> 262 +--------------
> arch/arm/cpu/arm946es/cpu.c |
> 13 +
> arch/arm/cpu/arm946es/start.S |
> 246 +-------------
> arch/arm/cpu/arm_intcm/start.S |
> 228 +------------
> arch/arm/cpu/armv7/exynos/pinmux.c |
> 561 +++++++++++++++++--------------
> arch/arm/cpu/armv7/rmobile/Makefile
> | 4 +-
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
> 29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
> cpu_info-rcar.c} | 12 +-
> arch/arm/cpu/armv7/rmobile/cpu_info.c |
> 49 ++-
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
> 20 +-
> arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
> 15 +-
> arch/arm/cpu/armv7/start.S |
> 253 +-------------
> arch/arm/cpu/armv7/zynq/u-boot.lds
> | 2 +-
> arch/arm/cpu/pxa/cpuinfo.c
> | 6 +
> arch/arm/cpu/pxa/start.S |
> 253 +-------------
> arch/arm/cpu/sa1100/cpu.c |
> 14 +
> arch/arm/cpu/sa1100/start.S |
> 225 +------------
> arch/arm/cpu/tegra-common/pinmux-common.c |
> 19 ++
> arch/arm/cpu/u-boot-spl.lds
> | 1 +
> arch/arm/cpu/u-boot.lds
> | 1 +
> arch/arm/dts/exynos4210-origen.dts
> | 4 +-
> arch/arm/dts/exynos4210-trats.dts
> | 6 +-
> arch/arm/dts/exynos4210-universal_c210.dts
> | 4 +-
> arch/arm/dts/exynos4412-trats2.dts
> | 4 +-
> arch/arm/dts/imx6q-sabreauto.dts |
> 10 +-
> arch/arm/imx-common/Makefile
> | 1 +
> arch/arm/imx-common/iomux-v3.c
> | 8 +
> arch/arm/imx-common/video.c |
> 65 ++++
> arch/arm/include/asm/arch-am33xx/clock.h
> | 2 +
> arch/arm/include/asm/arch-exynos/cpu.h |
> 17 +-
> arch/arm/include/asm/arch-exynos/gpio.h |
> 1761
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
> arch/arm/include/asm/arch-mx25/imx-regs.h |
> 175 ++++++++++
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> | 4 +
> arch/arm/include/asm/arch-omap5/clock.h
> | 3 +
> arch/arm/include/asm/arch-omap5/omap.h
> | 1 +
> arch/arm/include/asm/arch-rmobile/r8a7790.h |
> 609 +---------------------------------
> arch/arm/include/asm/arch-rmobile/r8a7791.h |
> 626 +----------------------------------
> arch/arm/include/asm/arch-rmobile/rcar-base.h |
> 637 +++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-rmobile/rmobile.h
> | 6 +
> arch/arm/include/asm/arch-s5pc1xx/gpio.h |
> 948 ++++++++++++++++++++++++++++++++++++++++++++--------
> arch/arm/include/asm/arch-tegra/gpio.h |
> 20 ++
> arch/arm/include/asm/arch-tegra/pinmux.h
> | 5 +
> arch/arm/include/asm/arch-tegra/tegra_mmc.h
> | 2 -
> arch/arm/include/asm/arch-tegra114/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra124/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra20/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra30/pinmux.h
> | 1 +
> arch/arm/include/asm/imx-common/iomux-v3.h
> | 5 +
> arch/arm/include/asm/imx-common/video.h |
> 24 ++
> arch/arm/lib/Makefile
> | 2 +-
> arch/arm/lib/cache.c |
> 13 +-
> arch/arm/lib/vectors.S |
> 291 ++++++++++++++++
> board/boundary/nitrogen6x/nitrogen6x.c |
> 69 +---
> board/compulab/cm_t335/u-boot.lds
> | 1 +
> board/embest/mx6boards/Makefile
> | 9 +
> board/embest/mx6boards/mx6boards.c |
> 601 +++++++++++++++++++++++++++++++++
> board/freescale/mx31ads/u-boot.lds
> | 1 +
> board/freescale/mx6sabresd/mx6sabresd.c |
> 67 +---
> board/freescale/mx6slevk/mx6slevk.c |
> 20 ++
> board/gateworks/gw_ventana/gw_ventana.c |
> 215 ++++++++++--
> board/gateworks/gw_ventana/ventana_eeprom.h |
> 14 +-
> board/gumstix/pepper/Makefile |
> 13 +
> board/gumstix/pepper/board.c |
> 226 +++++++++++++
> board/gumstix/pepper/board.h |
> 19 ++
> board/gumstix/pepper/mux.c |
> 78 +++++
> board/nvidia/jetson-tk1/jetson-tk1.c
> | 6 +
> board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
> 256 +++++++++-----
> board/nvidia/venice2/pinmux-config-venice2.h |
> 567 +++++++++++++++----------------
> board/nvidia/venice2/venice2.c |
> 19 +-
> board/renesas/koelsch/koelsch.c |
> 194 +----------
> board/renesas/koelsch/qos.c |
> 404 ++++++++++++++---------
> board/renesas/lager/lager.c |
> 196 +----------
> board/renesas/lager/qos.c |
> 236 ++++++-------
> board/samsung/arndale/arndale.c |
> 11 +-
> board/samsung/common/misc.c |
> 130 ++++----
> board/samsung/goni/goni.c |
> 32 +-
> board/samsung/smdk5250/exynos5-dt.c |
> 20 +-
> board/samsung/smdk5250/smdk5250.c |
> 19 +-
> board/samsung/smdk5420/smdk5420.c |
> 15 +-
> board/samsung/smdkc100/smdkc100.c
> | 5 +-
> board/samsung/smdkv310/smdkv310.c |
> 19 +-
> board/samsung/trats/trats.c |
> 39 +--
> board/samsung/trats2/trats2.c |
> 74 ++---
> board/samsung/universal_c210/universal.c |
> 51 ++-
> board/siemens/common/board.c |
> 46 ++- board/siemens/{dxr2 =>
> draco}/Makefile | 0 board/siemens/{dxr2
> => draco}/board.c | 112 ++++---
> board/siemens/{dxr2 => draco}/board.h |
> 26 +- board/siemens/{dxr2 =>
> draco}/mux.c | 2 +-
> board/siemens/pxm2/board.c |
> 10 +-
> board/siemens/rut/board.c
> | 2 +-
> board/ti/am335x/u-boot.lds
> | 1 +
> board/wandboard/wandboard.c |
> 146 ++++++--
> boards.cfg
> | 9 +-
> common/spl/spl_nand.c
> | 2 +-
> drivers/gpio/s5p_gpio.c |
> 204 ++++++++++--
> drivers/gpio/tegra_gpio.c |
> 20 ++
> drivers/mmc/tegra_mmc.c |
> 13 +-
> drivers/mtd/nand/omap_gpmc.c
> | 2 +-
> drivers/power/pmic/Makefile
> | 1 +
> drivers/power/pmic/pmic_ltc3676.c |
> 32 ++
> drivers/power/pmic/pmic_pfuze100.c
> | 2 +-
> drivers/video/Makefile
> | 1 +
> drivers/video/imx25lcdc.c |
> 121 +++++++
> include/configs/beaver.h
> | 3 +
> include/configs/cardhu.h
> | 3 +
> include/configs/da850evm.h
> | 1 +
> include/configs/draco.h |
> 92 ++++++
> include/configs/dxr2.h
> | 4 +-
> include/configs/embestmx6boards.h |
> 336 +++++++++++++++++++
> include/configs/exynos5-dt.h
> | 2 +
> include/configs/gw_ventana.h |
> 20 ++
> include/configs/hummingboard.h
> | 2 +
> include/configs/k2hk_evm.h
> | 1 +
> include/configs/koelsch.h |
> 36 +-
> include/configs/lager.h |
> 40 +--
> include/configs/m28evk.h
> | 1 -
> include/configs/mx53ard.h
> | 2 +
> include/configs/mx53evk.h
> | 2 +
> include/configs/mx53loco.h
> | 2 +
> include/configs/mx53smd.h
> | 2 +
> include/configs/mx6sabre_common.h
> | 2 +
> include/configs/mx6sabresd.h
> | 1 +
> include/configs/mx6slevk.h |
> 12 +
> include/configs/mxs.h
> | 1 +
> include/configs/nitrogen6x.h
> | 2 +
> include/configs/omap3_beagle.h |
> 10 +-
> include/configs/pepper.h |
> 99 ++++++
> include/configs/pxm2.h
> | 2 +-
> include/configs/s5p_goni.h
> | 4 +-
> include/configs/s5pc210_universal.h |
> 23 +-
> include/configs/siemens-am33x-common.h
> | 8 +-
> include/configs/smdk5250.h
> | 4 +
> include/configs/smdk5420.h
> | 4 +
> include/configs/smdkv310.h
> | 1 +
> include/configs/snow.h
> | 4 +
> include/configs/tegra-common.h
> | 7 +
> include/configs/trats.h |
> 17 +-
> include/configs/trats2.h |
> 17 +-
> include/configs/udoo.h
> | 2 +
> include/configs/wandboard.h |
> 38 ++-
> include/palmas.h
> | 4 +
> include/power/ltc3676_pmic.h |
> 51 +++
> include/power/pfuze100_pmic.h
> | 1 +
> include/samsung/misc.h
> | 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
> delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
> rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
> cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
> create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
> create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
> 100644 arch/arm/lib/vectors.S create mode 100644
> board/embest/mx6boards/Makefile create mode 100644
> board/embest/mx6boards/mx6boards.c create mode 100644
> board/gumstix/pepper/Makefile create mode 100644
> board/gumstix/pepper/board.c create mode 100644
> board/gumstix/pepper/board.h create mode 100644
> board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
> draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
> (63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
> board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
> drivers/power/pmic/pmic_ltc3676.c create mode 100644
> drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
> create mode 100644 include/configs/embestmx6boards.h create mode
> 100644 include/configs/pepper.h create mode 100644
> include/power/ltc3676_pmic.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140522/e7d4cfdc/attachment.pgp>
More information about the U-Boot
mailing list