[U-Boot] [PATCH 2/2] siemens, draco: add new target

[Samuel Egli]

Signed-off-by: Samuel Egli <samuel.egli at siemens.com>
Reviewed-by: Roger Meier <r.meier at siemens.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
---
 boards.cfg              |    1 +
 include/configs/draco.h |   92 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 include/configs/draco.h

diff --git a/boards.cfg b/boards.cfg
index 76c8764..4cc0235 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -260,6 +260,7 @@ Active  arm         armv7          am33xx      compulab        cm_t335
 Active  arm         armv7          am33xx      isee            igep0033            am335x_igep0033                      -                                                                                                                                 Enric Balletbo i Serra <eballetbo at iseebcn.com>
 Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev1                          pcm051:REV1                                                                                                                       Lars Poeschel <poeschel at lemonage.de>
 Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev3                          pcm051:REV3                                                                                                                       Lars Poeschel <poeschel at lemonage.de>
+Active  arm         armv7          am33xx      siemens         draco               draco                                -                                                                                                                                 Roger Meier <r.meier at siemens.com>
 Active  arm         armv7          am33xx      siemens         draco               dxr2                                 -                                                                                                                                 Roger Meier <r.meier at siemens.com>
 Active  arm         armv7          am33xx      siemens         pxm2                pxm2                                 -                                                                                                                                 Roger Meier <r.meier at siemens.com>
 Active  arm         armv7          am33xx      siemens         rut                 rut                                  -                                                                                                                                 Roger Meier <r.meier at siemens.com>
diff --git a/include/configs/draco.h b/include/configs/draco.h
new file mode 100644
index 0000000..a2438d8
--- /dev/null
+++ b/include/configs/draco.h
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on:
+ * U-Boot file:/include/configs/am335x_evm.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_DRACO_H
+#define __CONFIG_DRACO_H
+
+#define CONFIG_SIEMENS_DRACO
+#define MACH_TYPE_DRACO			4314
+#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO
+
+#include "siemens-am33x-common.h"
+
+#define CONFIG_SYS_MPUCLK	275
+#define DDR_PLL_FREQ	303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+#define BOARD_DFU_BUTTON_GPIO	27
+#define BOARD_DFU_BUTTON_LED	64	/* red LED */
+#define BOARD_STATUS_LED	103	/* green LED */
+#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
+
+#undef CONFIG_DOS_PARTITION
+#undef CONFIG_CMD_FAT
+
+
+ /* Physical Memory Map */
+#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
+#define EEPROM_ADDR_DDR3 0x90
+#define EEPROM_ADDR_CHIP 0x120
+
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300
+
+#undef CONFIG_SPL_NET_SUPPORT
+#undef CONFIG_SPL_NET_VCI_STRING
+#undef CONFIG_SPL_ETH_SUPPORT
+
+#undef CONFIG_MII
+#undef CONFIG_PHY_GIGE
+#define CONFIG_PHY_SMSC
+
+#define CONFIG_FACTORYSET
+
+/* Watchdog */
+#define CONFIG_OMAP_WATCHDOG
+
+#ifndef CONFIG_SPL_BUILD
+
+/* Default env settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"nand_img_size=0x400000\0" \
+	"optargs=\0" \
+	CONFIG_COMMON_ENV_SETTINGS
+
+#ifndef CONFIG_RESTORE_FLASH
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_BOOTCOMMAND \
+"if dfubutton; then " \
+	"run dfu_start; " \
+	"reset; " \
+"fi;" \
+"run nand_boot;" \
+"reset;"
+
+
+#else
+#define CONFIG_BOOTDELAY		0
+
+#define CONFIG_BOOTCOMMAND			\
+	"setenv autoload no; "			\
+	"dhcp; "				\
+	"if tftp 80000000 debrick.scr; then "	\
+		"source 80000000; "		\
+	"fi"
+#endif
+#endif	/* CONFIG_SPL_BUILD */
+#endif	/* ! __CONFIG_DRACO_H */
-- 
1.7.10.4