[U-Boot] [PATCH] powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot

[York Sun]

On 05/14/2014 11:30 PM, Liu Gang wrote:
> The new 768KB u-boot image size requires changes for
> SRIO/PCIE boot. These addresses need to be updated to
> appropriate locations.
> 
> The updated addresses are used to configure the SRIO/PCIE
> inbound windows for the boot, and they must be aligned
> with the window size based on the SRIO/PCIE modules requirement.
> So for the 768KB u-boot image, the inbound window cannot be set
> with 0xfff40000 base address and 0xc0000 size, it should be
> extended to 1MB size and the base address can be aligned with
> the size.
> 
> Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
> ---


Applied to u-boot-mpc85xx/master.

York