[U-Boot] [PATCH 3/3] ARM: dra7_evm: Add Ethernet support for dra72x platform

[Mugunthan V N]

Set the active_slave to 1 as slave 1 is pinned out in dra72x base board

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 board/ti/dra7xx/evm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 073d151..955c16f 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -157,6 +157,8 @@ int spl_start_uboot(void)
 #define VIN2A_D15_DLY_VAL		((0x4 << 5) + 0x0)
 #define VIN2A_D14_DLY_VAL		((0x4 << 5) + 0x0)
 
+extern u32 *const omap_si_rev;
+
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
@@ -183,7 +185,7 @@ static struct cpsw_platform_data cpsw_data = {
 	.mdio_div		= 0xff,
 	.channels		= 8,
 	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
+	.slaves			= 2,
 	.slave_data		= cpsw_slaves,
 	.ale_reg_ofs		= 0xd00,
 	.ale_entries		= 1024,
@@ -254,6 +256,9 @@ int board_eth_init(bd_t *bis)
 	ctrl_val |= 0x22;
 	writel(ctrl_val, (*ctrl)->control_core_control_io1);
 
+	if (*omap_si_rev == DRA722_ES1_0)
+		cpsw_data.active_slave = 1;
+
 	ret = cpsw_register(&cpsw_data);
 	if (ret < 0)
 		printf("Error %d registering CPSW switch\n", ret);
-- 
1.9.2.459.g68773ac