[U-Boot] [PATCH v1 1/3] ARM: omap4: add platform specific info for GPMC and ELM controllers

[Pekon Gupta]

This patch moves platform specific information for GPMC and ELM controller
into separate header files, so that any derivative devices do not mess other
header files.

Platform specific information added into arch-xx/../hardware.h
 - CPU related platform specific details like base-address of GPMC and ELM

Platform specific information added into arch-xx/../mem.h
 - Generic configs for GPMC and ELM initialization.
 - Hardware parameters or constrains specific to GPMC and ELM IP like;
   number of max number of chip-selects available

Signed-off-by: Pekon Gupta <pekon at ti.com>
---
 arch/arm/include/asm/arch-omap4/cpu.h      |  5 +--
 arch/arm/include/asm/arch-omap4/hardware.h | 26 +++++++++++++
 arch/arm/include/asm/arch-omap4/mem.h      | 62 ++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-omap4/omap.h     |  3 --
 4 files changed, 90 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-omap4/hardware.h
 create mode 100644 arch/arm/include/asm/arch-omap4/mem.h

diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index c21fb54..f7595ae 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -12,6 +12,8 @@
 #include <asm/types.h>
 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
 
+#include <asm/arch/hardware.h>
+
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 struct gptimer {
@@ -57,9 +59,6 @@ struct watchdog {
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)
 
-/* GPMC BASE */
-#define GPMC_BASE		(OMAP44XX_GPMC_BASE)
-
 /* I2C base */
 #define I2C_BASE1		(OMAP44XX_L4_PER_BASE + 0x70000)
 #define I2C_BASE2		(OMAP44XX_L4_PER_BASE + 0x72000)
diff --git a/arch/arm/include/asm/arch-omap4/hardware.h b/arch/arm/include/asm/arch-omap4/hardware.h
new file mode 100644
index 0000000..f7011b4
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * hardware.h
+ *
+ * hardware specific header
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __OMAP_HARDWARE_H
+#define __OMAP_HARDWARE_H
+
+#include <asm/arch/omap.h>
+
+/*
+ * Common hardware definitions
+ */
+
+/* BCH Error Location Module */
+#define ELM_BASE			0x48078000
+
+/* GPMC Base address */
+#define GPMC_BASE			0x50000000
+
+#endif
diff --git a/arch/arm/include/asm/arch-omap4/mem.h b/arch/arm/include/asm/arch-omap4/mem.h
new file mode 100644
index 0000000..d2e708b
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/mem.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author
+ *		Mansoor Ahamed <mansoor.ahamed at ti.com>
+ *
+ * Initial Code from:
+ *		Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MEM_H_
+#define _MEM_H_
+
+/*
+ * GPMC settings -
+ * Definitions is as per the following format
+ * #define <PART>_GPMC_CONFIG<x> <value>
+ * Where:
+ * PART is the part name e.g. STNOR - Intel Strata Flash
+ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
+ * Value is corresponding value
+ *
+ * For every valid PRCM configuration there should be only one definition of
+ * the same. if values are independent of the board, this definition will be
+ * present in this file if values are dependent on the board, then this should
+ * go into corresponding mem-boardName.h file
+ *
+ * Currently valid part Names are (PART):
+ * M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
+ */
+#define GPMC_SIZE_256M		0x0
+#define GPMC_SIZE_128M		0x8
+#define GPMC_SIZE_64M		0xC
+#define GPMC_SIZE_32M		0xE
+#define GPMC_SIZE_16M		0xF
+
+#define M_NAND_GPMC_CONFIG1	0x00000800
+#define M_NAND_GPMC_CONFIG2	0x001e1e00
+#define M_NAND_GPMC_CONFIG3	0x001e1e00
+#define M_NAND_GPMC_CONFIG4	0x16051807
+#define M_NAND_GPMC_CONFIG5	0x00151e1e
+#define M_NAND_GPMC_CONFIG6	0x16000f80
+#define M_NAND_GPMC_CONFIG7	0x00000008
+
+#define STNOR_GPMC_CONFIG1	0x00001200
+#define STNOR_GPMC_CONFIG2	0x00101000
+#define STNOR_GPMC_CONFIG3	0x00030301
+#define STNOR_GPMC_CONFIG4	0x10041004
+#define STNOR_GPMC_CONFIG5	0x000C1010
+#define STNOR_GPMC_CONFIG6	0x08070280
+#define STNOR_GPMC_CONFIG7	0x00000F48
+
+/* max number of GPMC Chip Selects */
+#define GPMC_MAX_CS		8
+/* max number of GPMC regs */
+#define GPMC_MAX_REG		7
+
+#endif /* endif _MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index f66da0d..d43dc26 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -60,9 +60,6 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
 
-/* GPMC */
-#define OMAP44XX_GPMC_BASE	0x50000000
-
 /*
  * Hardware Register Details
  */
-- 
1.8.5.1.163.gd7aced9