[U-Boot] [PATCH v5 0/8] sunxi: initial upstreaming effort
Albert ARIBAUD
albert.u.boot at aribaud.net
Sun May 25 17:02:57 CEST 2014
Hi Ian,
On Mon, 05 May 2014 11:52:02 +0100, Ian Campbell <ijc at hellion.org.uk>
wrote:
> This is my fifth attempt at an upstreamable series based upon the
> https://github.com/linux-sunxi/u-boot-sunxi.git#sunxi tree. The
> intention is to present a minimal starting point for upstreaming to
> which support for other processors, peripherals, boards etc can be
> added in the future. Therefore this has been stripped right back and
> currently supports only sun7i processors (AKA Allwinner A20) and the
> cubietruck board. Supported peripherals are UART, MMC and Ethernet.
>
> The code here is from u-boot-sunxi.git#sunxi[0] changeset based on
> d9fe0a1e061e 3f5ff92b1503 "sunxi: add comments to pll1_para array."
> and applies to u-boot v2014.04. It merges cleanly into current
> mainline head.
>
> As of v4 the majority of the series now has at least one Ack or
> Reviewed-by. In summary:
>
> + sunxi: add sun7i clocks and timer support.
> mT sunxi: add sun7i pinmux and gpio support
> M sunxi: add sun7i dram setup support
> M + sunxi: add sun7i cpu, board and start of day support
> MT sunxi: add support for Cubietruck booting in FEL mode
> M sunxi: add gmac Ethernet support
> M sunxi: mmc support
> M sunxi: non-FEL SPL boot support for sun7i
>
> M==Reviewed-by Marek Vasut.
> m==Acked-by Marek Vasut.
> T==Reviewed-by Tom Rini
> +==Minor changes in v5
>
> Changes in v5:
> - Resynced with u-boot-sunxi.git 3f5ff92b1503 "sunxi: add comments to
> pll1_para array.". Dropped "Reduce DMA burst length" patch which is
> being handled elsewhere. Otherwise see individual commit logs for
> details.
>
> Changes in v4:
> - Resynced with u-boot-sunxi.git d9fe0a1e061e which pulled lots of fixes
> for Marek's review comments.
>
> Global changes in v3:
> - Rebased onto v2014.04 and resynced with u-boot-sunxi.git c89867dca2e9
> - Improved commit messages
> - Updated lists of contributors
> - Added some CCs
> - Lots of cleanup based on review comments.
>
> Global changes in v2:
> - Use SPDX-License-Identifier
> - Resync with u-boot-sunxi.git
> - Lot of updates to the individual patches, see the individual commit
> messages (checkpatch.pl fixes, magic number removal etc).
> - Pulled the Ethernet stuff before the MMC and non-FEL boot
> stuff. The MMC stuff (which non-FEL boot needs) still needs some more
> cleanup, but the reordering means that the initial part of the
> series could in principal go in.
>
> This series can also be found at:
>
> git://gitorious.org/ijc/u-boot.git sunxi-mainlining-v5
>
> There is no SMP here, since that relies on the PSCI support from Marc
> Zyngier which has yet to land in mainline. Marc has recently rebased
> and a version based on this series can be found at:
>
> git://gitorious.org/ijc/u-boot.git sunxi-mainlining-v5-smp
>
> I've tried to give corect credit and S-o-b based upon:
> git log --pretty='%aN' linux-sunxi/sunxi -- [PATHS] | sort -u
> git log linux-sunxi/sunxi -- [PATHS] | grep -i signed.off.by | sort -u
> Manual inspection
>
> This will tend to over credit, since it will include folks who
> contributed code which has since been removed as well as those who
> contributed code which is not included in this patch set, but I think
> it is better to be conservative and include too many rather than
> incorrectly exclude people. Doing better than this would be IMHO too
> hard to be worth it (e.g. git blame would prefer a recent whitespace
> cleanup to the actual author of the code and prefer someone did code
> motion over the original author, so it would be a massive & manual
> process).
>
> [0] https://github.com/linux-sunxi/u-boot-sunxi.git
>
>
Applied (with manual fixes to minor 'git am' conflicts on ./boards.cfg
and ./Makefile) to u-boot-arm/master, thanks!
(now, to try and understand once more if and how this could be leveraged
for A31 support...)
Amicalement,
--
Albert.
More information about the U-Boot
mailing list