[U-Boot] [U-boot] [Patch 0/2] keystone: nand: add additional nand ecclayout

[Ivan Khoronzhuk]

This series adds a nand ecclayout command to davinci nand that allows
the ecclayout of the current nand device to be changed during run
time. This feature is useful when using u-boot to write something to
nand flash that will be read by other applications, such as ROM
bootloader, that expects a different ECC layout. In that case, change
the current nand device ecclayout using the "nand ecclayout set"
command before writing the data to nand flash.

Based on u-boot.git/master

WingMan Kwok (2):
  common: cmd_nand: add nand ecclayout command
  mtd: nand: davinci: allow to change ecclayout by ecclayout command

 common/cmd_nand.c               | 115 +++++++++++++++++++++++++++++++++++++++-
 drivers/mtd/nand/davinci_nand.c | 101 +++++++++++++++++++++++++++++++++++
 include/nand.h                  |  10 ++++
 3 files changed, 225 insertions(+), 1 deletion(-)

-- 
1.8.3.2