[U-Boot] [U-Boot,v2,1/2] ARM: at91sam9m10g45ek: enable mci0 support

[Andreas Bießmann]

Dear Josh Wu,

Josh Wu <Josh.wu at atmel.com> writes:
>Also we enable the mmc command in configuration file.
>
>As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
>so remove the redundant CONFIG_DOS_PARTITION definition.
>
>Signed-off-by: Josh Wu <josh.wu at atmel.com>
>
>---
>v1 -> v2:
>  1. refined the comment for the pins.
>  2. remove detected pin initialization.
>  3. move the mci initialization code to devices.c
>  4. remove useless header file: mmc.h
>
> .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c    |   17 +++++++++++++++++
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c    |   10 ++++++++++
> include/configs/at91sam9m10g45ek.h                 |   15 ++++++++++++++-
> 3 files changed, 41 insertions(+), 1 deletion(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann