[U-Boot] [PATCH v2 3/9] fpga: virtex2: Avoid CamelCase

Michal Simek michal.simek at xilinx.com
Wed May 7 15:03:27 CEST 2014


No functional changes.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2: None

 board/gen860t/fpga.c   |  4 ++--
 drivers/fpga/virtex2.c | 34 +++++++++++++++++-----------------
 drivers/fpga/xilinx.c  | 14 +++++++-------
 include/virtex2.h      | 34 +++++++++++++++++-----------------
 include/xilinx.h       |  2 +-
 5 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index b7984dd0fec1..48a4222ac410 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Note that these are pointers to code that is in Flash.  They will be
  * relocated at runtime.
  */
-Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = {
+xilinx_virtex2_slave_selectmap_fns fpga_fns = {
 	fpga_pre_config_fn,
 	fpga_pgm_fn,
 	fpga_init_fn,
@@ -57,7 +57,7 @@ Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = {
 };

 Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
-	{Xilinx_Virtex2,
+	{xilinx_virtex2,
 	 slave_selectmap,
 	 XILINX_XC2V3000_SIZE,
 	 (void *) &fpga_fns,
diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c
index b5a895d41a73..1cd9046a2487 100644
--- a/drivers/fpga/virtex2.c
+++ b/drivers/fpga/virtex2.c
@@ -84,25 +84,25 @@
 #define CONFIG_SYS_FPGA_WAIT_CONFIG	CONFIG_SYS_HZ/5	/* 200 ms */
 #endif

-static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize);
-static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize);

-static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize);
-static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize);

-int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+int virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;

 	switch (desc->iface) {
 	case slave_serial:
 		PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
-		ret_val = Virtex2_ss_load (desc, buf, bsize);
+		ret_val = virtex2_ss_load(desc, buf, bsize);
 		break;

 	case slave_selectmap:
 		PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_load (desc, buf, bsize);
+		ret_val = virtex2_ssm_load(desc, buf, bsize);
 		break;

 	default:
@@ -112,19 +112,19 @@ int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 	return ret_val;
 }

-int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+int virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;

 	switch (desc->iface) {
 	case slave_serial:
 		PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ss_dump (desc, buf, bsize);
+		ret_val = virtex2_ss_dump(desc, buf, bsize);
 		break;

 	case slave_parallel:
 		PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_dump (desc, buf, bsize);
+		ret_val = virtex2_ssm_dump(desc, buf, bsize);
 		break;

 	default:
@@ -134,7 +134,7 @@ int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 	return ret_val;
 }

-int Virtex2_info (Xilinx_desc * desc)
+int virtex2_info(Xilinx_desc *desc)
 {
 	return FPGA_SUCCESS;
 }
@@ -153,10 +153,10 @@ int Virtex2_info (Xilinx_desc * desc)
  *    INIT_B and DONE lines.  If both are high, configuration has
  *    succeeded. Congratulations!
  */
-static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+	xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns;

 	PRINTF ("%s:%d: Start with interface functions @ 0x%p\n",
 			__FUNCTION__, __LINE__, fn);
@@ -352,10 +352,10 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 /*
  * Read the FPGA configuration data
  */
-static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+	xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns;

 	if (fn) {
 		unsigned char *data = (unsigned char *) buf;
@@ -404,13 +404,13 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 	return ret_val;
 }

-static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__);
 	return FPGA_FAIL;
 }

-static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__);
 	return FPGA_FAIL;
diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index 7d93d641f6aa..6953535f0823 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -169,11 +169,11 @@ int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 					__FUNCTION__);
 #endif
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 #if defined(CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Loader...\n",
 					__FUNCTION__);
-			ret_val = Virtex2_load (desc, buf, bsize);
+			ret_val = virtex2_load(desc, buf, bsize);
 #else
 			printf ("%s: No support for Virtex-II devices.\n",
 					__FUNCTION__);
@@ -226,11 +226,11 @@ int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 					__FUNCTION__);
 #endif
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 #if defined( CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Reader...\n",
 					__FUNCTION__);
-			ret_val = Virtex2_dump (desc, buf, bsize);
+			ret_val = virtex2_dump(desc, buf, bsize);
 #else
 			printf ("%s: No support for Virtex-II devices.\n",
 					__FUNCTION__);
@@ -268,7 +268,7 @@ int xilinx_info (Xilinx_desc * desc)
 		case xilinx_spartan3:
 			printf ("Spartan-III\n");
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 			printf ("Virtex-II\n");
 			break;
 		case xilinx_zynq:
@@ -334,9 +334,9 @@ int xilinx_info (Xilinx_desc * desc)
 						__FUNCTION__);
 #endif
 				break;
-			case Xilinx_Virtex2:
+			case xilinx_virtex2:
 #if defined(CONFIG_FPGA_VIRTEX2)
-				Virtex2_info (desc);
+				virtex2_info(desc);
 #else
 				/* just in case */
 				printf ("%s: No support for Virtex-II devices.\n",
diff --git a/include/virtex2.h b/include/virtex2.h
index 2e9a4f52da3d..1e6624ca9627 100644
--- a/include/virtex2.h
+++ b/include/virtex2.h
@@ -11,9 +11,9 @@

 #include <xilinx.h>

-extern int Virtex2_load(Xilinx_desc *desc, const void *image, size_t size);
-extern int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
-extern int Virtex2_info(Xilinx_desc *desc);
+int virtex2_load(Xilinx_desc *desc, const void *image, size_t size);
+int virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+int virtex2_info(Xilinx_desc *desc);

 /*
  * Slave SelectMap Implementation function table.
@@ -32,7 +32,7 @@ typedef struct {
 	Xilinx_busy_fn	busy;
 	Xilinx_abort_fn	abort;
 	Xilinx_post_fn	post;
-} Xilinx_Virtex2_Slave_SelectMap_fns;
+} xilinx_virtex2_slave_selectmap_fns;

 /* Slave Serial Implementation function table */
 typedef struct {
@@ -40,7 +40,7 @@ typedef struct {
 	Xilinx_clk_fn	clk;
 	Xilinx_rdata_fn	rdata;
 	Xilinx_wdata_fn	wdata;
-} Xilinx_Virtex2_Slave_Serial_fns;
+} xilinx_virtex2_slave_serial_fns;

 /* Device Image Sizes (in bytes)
  *********************************************************************/
@@ -60,39 +60,39 @@ typedef struct {
 /* Descriptor Macros
  *********************************************************************/
 #define XILINX_XC2V40_DESC(iface, fn_table, cookie)	\
-{ Xilinx_Virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie }

 #define XILINX_XC2V80_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie }

 #define XILINX_XC2V250_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie }

 #define XILINX_XC2V500_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie }

 #define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie }

 #define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie }

 #define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie }

 #define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie }

 #define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie }

 #define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie }

 #define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie }

 #define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie }
+{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie }

 #endif /* _VIRTEX2_H_ */
diff --git a/include/xilinx.h b/include/xilinx.h
index 365c0c358eb4..fa89fb68351b 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -28,7 +28,7 @@ typedef enum {			/* typedef Xilinx_Family */
 	min_xilinx_type,	/* low range check value */
 	xilinx_spartan2,	/* Spartan-II Family */
 	Xilinx_VirtexE,		/* Virtex-E Family */
-	Xilinx_Virtex2,		/* Virtex2 Family */
+	xilinx_virtex2,		/* Virtex2 Family */
 	xilinx_spartan3,	/* Spartan-III Family */
 	xilinx_zynq,		/* Zynq Family */
 	max_xilinx_type		/* insert all new types before this */
--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140507/4c8a8f8d/attachment.pgp>


More information about the U-Boot mailing list