[U-Boot] [GIT PULL] Zynq patches
Michal Simek
michal.simek at xilinx.com
Wed May 14 08:09:36 CEST 2014
Hi Albert,
here is the set of patches I have capture for Xilinx Zynq.
I am sending it now because this patchset was based on
fpga changes I have done and which were merged yesterday.
I have also checked your arm custodian repo and you don't have
pending patches that's why I believe it shouldn't be
any problem to do a merge with Tom's tree.
Buildman doesn't show any problem around zynq patches I am sending.
Thanks,
Michal
[u-boot]$ ./tools/buildman/buildman -b zynq zynq -sSed
Summary of 21 commits for 6 boards (4 threads, 1 job per thread)
01: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
02: ARM: zynq: Fix sparse warnings in slcr.c
03: ARM: zynq: Fix sparse warning in ddrc.c
04: ARM: zynq: Remove sparse warnings
arm: (for 6/6 boards) data -168.0 rodata +168.0
zynq_zc770_xm010: data -168 rodata +168
zynq_zc770_xm013: data -168 rodata +168
zynq_zc770_xm012: data -168 rodata +168
zynq_zed : data -168 rodata +168
zynq_zc70x : data -168 rodata +168
zynq_microzed : data -168 rodata +168
05: ARM: zynq: Added efuse status register base address
06: ARM: zynq: Do not use half memory size for ECC case
arm: (for 6/6 boards) all -32.0 text -32.0
zynq_zc770_xm010: all -32 text -32
zynq_zc770_xm013: all -32 text -32
zynq_zc770_xm012: all -32 text -32
zynq_zed : all -32 text -32
zynq_zc70x : all -32 text -32
zynq_microzed : all -32 text -32
07: ARM: zynq: Call zynq board_init() in SPL
arm: (for 6/6 boards) spl/u-boot-spl:all +16.0 spl/u-boot-spl:text +16.0
zynq_zc770_xm010: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
zynq_zc770_xm013: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
zynq_zc770_xm012: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
zynq_zed : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
zynq_zc70x : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
zynq_microzed : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
08: ARM: zynq: slcr: Fix incorrect commentary
09: ARM: zynq: Setup correct slcr_lock value
arm: (for 6/6 boards) all +102.0 bss +2.7 data +4.0 spl/u-boot-spl:all +72.0 spl/u-boot-spl:data +4.0 spl/u-boot-spl:text +68.0 text +95.3
zynq_zc770_xm010: all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
zynq_zed : all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
zynq_microzed : all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
zynq_zc770_xm013: all +100 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
zynq_zc770_xm012: all +96 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +92
zynq_zc70x : all +80 bss -20 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
10: ARM: zynq: Fix bootmode mask
11: ARM: zynq: Fix building SPL without FPGA support
12: ARM: zynq: Extend kernel image size to 60MB
13: ARM: zynq: Add MIO detection code
14: ARM: zynq: ehci: Added USB host driver support
arm: (for 6/6 boards) all +9.3 bss -0.7 rodata +10.0 spl/u-boot-spl:all +10.0 spl/u-boot-spl:rodata +10.0
zynq_zc70x : all +34 bss +24 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
zynq_zc770_xm013: all +10 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
zynq_zc770_xm012: all +10 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
zynq_zc770_xm010: all +2 bss -8 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
zynq_microzed : all +2 bss -8 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
zynq_zed : all -2 bss -12 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
15: ARM: zynq: Added USB host support for zynq boards
arm: (for 6/6 boards) all +36453.7 bss +26203.3 data +38.7 rodata +2047.7 spl/u-boot-spl:all +1.3 spl/u-boot-spl:rodata +1.3 text +8164.0
zynq_zed : all +109121 bss +78632 data +116 rodata +5881 spl/u-boot-spl:all +4 spl/u-boot-spl:rodata +4 text +24492
zynq_zc70x : all +109085 bss +78596 data +116 rodata +5881 spl/u-boot-spl:all +4 spl/u-boot-spl:rodata +4 text +24492
zynq_zc770_xm013: all +131 rodata +131
zynq_zc770_xm012: all +131 rodata +131
zynq_zc770_xm010: all +127 bss -4 rodata +131
zynq_microzed : all +127 bss -4 rodata +131
16: ARM: zynq: Enable the FAT write capability
arm: (for 6/6 boards) all +4133.3 bss -2.0 data +18.7 rodata +386.0 text +3730.7
zynq_microzed : all +6223 bss +20 data +28 rodata +579 text +5596
zynq_zc70x : all +6195 bss -8 data +28 rodata +579 text +5596
zynq_zc770_xm010: all +6191 bss -12 data +28 rodata +579 text +5596
zynq_zed : all +6191 bss -12 data +28 rodata +579 text +5596
17: ARM: zynq: Move USB/SD/MMC common FAT configs
18: ARM: zynq: Enable EXT4 configs
arm: (for 6/6 boards) all +14302.0 bss +562.0 data +74.7 rodata +1142.7 text +12522.7
zynq_zc770_xm010: all +21462 bss +852 data +112 rodata +1714 text +18784
zynq_zed : all +21462 bss +852 data +112 rodata +1714 text +18784
zynq_zc70x : all +21458 bss +848 data +112 rodata +1714 text +18784
zynq_microzed : all +21430 bss +820 data +112 rodata +1714 text +18784
19: ARM: zynq: Extend maximum number of command arguments
20: zynq: add empty xil_io.h to avoid compile error
21: zynq: treat ps7_init.c/h as external files to ignore them
arm: (for 6/6 boards) spl/u-boot-spl:all -83.0 spl/u-boot-spl:rodata -75.0 spl/u-boot-spl:text -8.0
zynq_zc770_xm010: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
zynq_zc770_xm013: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
zynq_zc770_xm012: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
zynq_zed : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
zynq_zc70x : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
zynq_microzed : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
The following changes since commit 27b4e4b9913f65b52d20485dff3f8800bf78f3d7:
Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze (2014-05-13 07:34:08 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to 66e6715c5ffe817c70485020508c7b9ec47227b7:
zynq: treat ps7_init.c/h as external files to ignore them (2014-05-14 07:52:46 +0200)
----------------------------------------------------------------
Masahiro Yamada (2):
zynq: add empty xil_io.h to avoid compile error
zynq: treat ps7_init.c/h as external files to ignore them
Michal Simek (12):
ARM: zynq: Fix sparse warnings in slcr.c
ARM: zynq: Fix sparse warning in ddrc.c
ARM: zynq: Remove sparse warnings
ARM: zynq: Do not use half memory size for ECC case
ARM: zynq: Call zynq board_init() in SPL
ARM: zynq: slcr: Fix incorrect commentary
ARM: zynq: Setup correct slcr_lock value
ARM: zynq: Fix building SPL without FPGA support
ARM: zynq: Extend kernel image size to 60MB
ARM: zynq: Add MIO detection code
ARM: zynq: ehci: Added USB host driver support
ARM: zynq: Extend maximum number of command arguments
Mike Looijmans (1):
ARM: zynq: Fix bootmode mask
Siva Durga Prasad Paladugu (5):
ARM: zynq: Added efuse status register base address
ARM: zynq: Added USB host support for zynq boards
ARM: zynq: Enable the FAT write capability
ARM: zynq: Move USB/SD/MMC common FAT configs
ARM: zynq: Enable EXT4 configs
arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++++++++++
arch/arm/cpu/armv7/zynq/ddrc.c | 5 +----
arch/arm/cpu/armv7/zynq/slcr.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
arch/arm/cpu/armv7/zynq/spl.c | 15 ++++++++++++++
arch/arm/include/asm/arch-zynq/hardware.h | 13 +++++++++++-
arch/arm/include/asm/arch-zynq/sys_proto.h | 2 ++
board/xilinx/zynq/.gitignore | 1 +
board/xilinx/zynq/Makefile | 5 ++++-
board/xilinx/zynq/board.c | 25 ++++++++++++++---------
board/xilinx/zynq/ps7_init.c | 12 -----------
board/xilinx/zynq/xil_io.h | 13 ++++++++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-zynq.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/zynq-common.h | 32 +++++++++++++++++++++++++----
include/configs/zynq_zc70x.h | 1 +
include/configs/zynq_zed.h | 1 +
16 files changed, 294 insertions(+), 36 deletions(-)
create mode 100644 board/xilinx/zynq/.gitignore
delete mode 100644 board/xilinx/zynq/ps7_init.c
create mode 100644 board/xilinx/zynq/xil_io.h
create mode 100644 drivers/usb/host/ehci-zynq.c
More information about the U-Boot
mailing list