[U-Boot] [PATCH 2/2] ARM: at91sam9m10g45ek: add mmc environment configuration support

Josh Wu josh.wu at atmel.com
Tue May 20 12:38:03 CEST 2014


In this configuration the environment will save in file: uboot.env of
mmc card.

Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 boards.cfg                         |    1 +
 include/configs/at91sam9m10g45ek.h |   20 ++++++++++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/boards.cfg b/boards.cfg
index 3a59686..9f7cfd8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -102,6 +102,7 @@ Active  arm         arm926ejs      at91        atmel           at91sam9263ek
 Active  arm         arm926ejs      at91        atmel           at91sam9263ek       at91sam9263ek_norflash                at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH                                                                                        Stelian Pop <stelian at popies.net>
 Active  arm         arm926ejs      at91        atmel           at91sam9263ek       at91sam9263ek_norflash_boot           at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH                                                                                   Stelian Pop <stelian at popies.net>
 Active  arm         arm926ejs      at91        atmel           at91sam9m10g45ek    at91sam9m10g45ek_nandflash            at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH                                                                                 Bo Shen<voice.shen at atmel.com>
+Active  arm         arm926ejs      at91        atmel           at91sam9m10g45ek    at91sam9m10g45ek_mmc                  at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_MMC                                                                                       Bo Shen<voice.shen at atmel.com>
 Active  arm         arm926ejs      at91        atmel           at91sam9n12ek       at91sam9n12ek_mmc                     at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC                                                                                             Josh Wu <josh.wu at atmel.com>
 Active  arm         arm926ejs      at91        atmel           at91sam9n12ek       at91sam9n12ek_nandflash               at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH                                                                                       Josh Wu <josh.wu at atmel.com>
 Active  arm         arm926ejs      at91        atmel           at91sam9n12ek       at91sam9n12ek_spiflash                at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH                                                                                        Josh Wu <josh.wu at atmel.com>
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index df277e7..07b2188 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -147,6 +147,7 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x23e00000
 
+#ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0xc0000
@@ -162,6 +163,25 @@
 	"256k(env),256k(env_redundant),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env + linux in mmc */
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_DEVICE		0
+#define FAT_ENV_PART		1
+#define FAT_ENV_FILE		"uboot.env"
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_SIZE		0x4000
+
+#define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mmcblk0p2 " \
+				"rw rootfstype=ext4 rootwait"
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
+				"fatload mmc 0:1 0x72000000 uImage; " \
+				"bootm 0x72000000 - 0x71000000"
+#endif
 
 #define CONFIG_BAUDRATE			115200
 
-- 
1.7.9.5



More information about the U-Boot mailing list