[U-Boot] [PATCH] armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context
Tom Rini
trini at ti.com
Fri May 16 19:02:24 CEST 2014
The omap_hw_init_context function (and assorted helpers) is the same for
all OMAP-derived parts as when CHSETTINGS are used, that's the same and
our DDR base is also always the same. In order to make this common we
simply need to update the names of the define for DDR address space
which is also common.
Cc: Sricharan R. <r.sricharan at ti.com>
Cc: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Tom Rini <trini at ti.com>
---
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 4 +-
arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/sys_proto.h | 51 +----------------
arch/arm/include/asm/arch-omap5/omap.h | 5 --
arch/arm/include/asm/arch-omap5/sys_proto.h | 50 +---------------
arch/arm/include/asm/omap_common.h | 6 --
arch/arm/include/asm/ti-common/sys_proto.h | 72 ++++++++++++++++++++++++
7 files changed, 77 insertions(+), 112 deletions(-)
create mode 100644 arch/arm/include/asm/ti-common/sys_proto.h
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 8ebc0ce..132454c 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -194,8 +194,8 @@ u32 omap_sdram_size(void)
addr = section & EMIF_SYS_ADDR_MASK;
/* See if the address is valid */
- if ((addr >= DRAM_ADDR_SPACE_START) &&
- (addr < DRAM_ADDR_SPACE_END)) {
+ if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
+ (addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) {
size = ((section & EMIF_SYS_SIZE_MASK) >>
EMIF_SYS_SIZE_SHIFT);
size = 1 << size;
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 91ff2ad..33a82fc 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -11,6 +11,7 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <linux/mtd/omap_gpmc.h>
+#include <asm/ti-common/sys_proto.h>
#include <asm/arch/cpu.h>
#define BOARD_REV_ID 0x0
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 80172f3..83d858f 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -14,6 +14,7 @@
#include <asm/omap_common.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/arch/mux_omap4.h>
+#include <asm/ti-common/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -53,54 +54,4 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
void setup_warmreset_time(void);
-
-static inline u32 running_from_sdram(void)
-{
- u32 pc;
- asm volatile ("mov %0, pc" : "=r" (pc));
- return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
- (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
-}
-
-static inline u8 uboot_loaded_by_spl(void)
-{
- /*
- * u-boot can be running from sdram either because of configuration
- * Header or by SPL. If because of CH, then the romcode sets the
- * CHSETTINGS executed bit to true in the boot parameter structure that
- * it passes to the bootloader.This parameter is stored in the ch_flags
- * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
- * mandatory section if CH is present.
- */
- if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
- return 0;
- else
- return running_from_sdram();
-}
-/*
- * The basic hardware init of OMAP(s_init()) can happen in 4
- * different contexts:
- * 1. SPL running from SRAM
- * 2. U-Boot running from FLASH
- * 3. Non-XIP U-Boot loaded to SDRAM by SPL
- * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
- * Configuration Header feature
- *
- * This function finds this context.
- * Defining as inline may help in compiling out unused functions in SPL
- */
-static inline u32 omap_hw_init_context(void)
-{
-#ifdef CONFIG_SPL_BUILD
- return OMAP_INIT_CONTEXT_SPL;
-#else
- if (uboot_loaded_by_spl())
- return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
- else if (running_from_sdram())
- return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
- else
- return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
-#endif
-}
-
#endif
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 19fdece..54fc825 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -23,11 +23,6 @@
#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000
#define OMAP54XX_L4_PER_BASE 0x48000000
-#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000
-#define OMAP54XX_DRAM_ADDR_SPACE_END 0xFFFFFFFF
-#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
-#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
-
/* CONTROL ID CODE */
#define CONTROL_CORE_ID_CODE 0x4A002204
#define CONTROL_WKUP_ID_CODE 0x4AE0C204
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index bf12c73..1038303 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -14,6 +14,7 @@
#include <asm/omap_common.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/arch/clock.h>
+#include <asm/ti-common/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -56,55 +57,6 @@ void get_ioregs(const struct ctrl_ioregs **regs);
void srcomp_enable(void);
void setup_warmreset_time(void);
-static inline u32 running_from_sdram(void)
-{
- u32 pc;
- asm volatile ("mov %0, pc" : "=r" (pc));
- return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) &&
- (pc < OMAP54XX_DRAM_ADDR_SPACE_END));
-}
-
-static inline u8 uboot_loaded_by_spl(void)
-{
- /*
- * u-boot can be running from sdram either because of configuration
- * Header or by SPL. If because of CH, then the romcode sets the
- * CHSETTINGS executed bit to true in the boot parameter structure that
- * it passes to the bootloader.This parameter is stored in the ch_flags
- * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
- * mandatory section if CH is present.
- */
- if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
- return 0;
- else
- return running_from_sdram();
-}
-/*
- * The basic hardware init of OMAP(s_init()) can happen in 4
- * different contexts:
- * 1. SPL running from SRAM
- * 2. U-Boot running from FLASH
- * 3. Non-XIP U-Boot loaded to SDRAM by SPL
- * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
- * Configuration Header feature
- *
- * This function finds this context.
- * Defining as inline may help in compiling out unused functions in SPL
- */
-static inline u32 omap_hw_init_context(void)
-{
-#ifdef CONFIG_SPL_BUILD
- return OMAP_INIT_CONTEXT_SPL;
-#else
- if (uboot_loaded_by_spl())
- return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
- else if (running_from_sdram())
- return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
- else
- return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
-#endif
-}
-
static inline u32 div_round_up(u32 num, u32 den)
{
return (num + den - 1)/den;
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 729723a..29278fe 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -576,12 +576,6 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
void usb_fake_mac_from_die_id(u32 *id);
-/* HW Init Context */
-#define OMAP_INIT_CONTEXT_SPL 0
-#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
-#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
-#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
-
/* ABB */
#define OMAP_ABB_NOMINAL_OPP 0
#define OMAP_ABB_FAST_OPP 1
diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h
new file mode 100644
index 0000000..d3ab75f
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/sys_proto.h
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _TI_COMMON_SYS_PROTO_H_
+#define _TI_COMMON_SYS_PROTO_H_
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_OMAP_COMMON
+#define TI_ARMV7_DRAM_ADDR_SPACE_START 0x80000000
+#define TI_ARMV7_DRAM_ADDR_SPACE_END 0xFFFFFFFF
+
+#define OMAP_INIT_CONTEXT_SPL 0
+#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
+
+static inline u32 running_from_sdram(void)
+{
+ u32 pc;
+ asm volatile ("mov %0, pc" : "=r" (pc));
+ return ((pc >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
+ (pc < TI_ARMV7_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+ /*
+ * u-boot can be running from sdram either because of configuration
+ * Header or by SPL. If because of CH, then the romcode sets the
+ * CHSETTINGS executed bit to true in the boot parameter structure that
+ * it passes to the bootloader.This parameter is stored in the ch_flags
+ * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+ * mandatory section if CH is present.
+ */
+ if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ return 0;
+ else
+ return running_from_sdram();
+}
+
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ * 1. SPL running from SRAM
+ * 2. U-Boot running from FLASH
+ * 3. Non-XIP U-Boot loaded to SDRAM by SPL
+ * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ * Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ return OMAP_INIT_CONTEXT_SPL;
+#else
+ if (uboot_loaded_by_spl())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+ else if (running_from_sdram())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+ else
+ return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+#endif
+
+#endif
--
1.7.9.5
More information about the U-Boot
mailing list