[U-Boot] [PATCH V2] cmd_mmc.c: check mmc_init() during mmc dev

[Jaehoon Chung]

On 05/22/2014 01:18 AM, Stephen Warren wrote:
> On 05/20/2014 11:40 PM, Jaehoon Chung wrote:
>> Hi, Stephen.
>>
>> i didn't apply your patch. Which repository do you use?
> 
> It's based on u-boot.git master branch. The latest u-boot-mmc.git master
> branch is already included in that branch, and it looks like some
> changes have been applied to cmd_mmc.c in u-boot/master that aren't in
> u-boot-mmc/master.

I have pulled the latest u-boot.git, but it didn't apply this patch.
If i missed something, let me know plz.

> 
>> Well, if you want to check, can be used "if (mmc_init(mmc))".
>>
>> And i'm not sure whether this code is really need or not.
> 
> Why not? This code is required to solve the problem described in the
> commit description:

I will try to reproduce the problem described in the commit-msg.
Because, i didn't reproduce it, so i'm not sure. 
But to control the return value, it's reasonable, right?

Best Regards,
Jaehoon Chung
> 
>> On 05/21/2014 01:57 AM, Stephen Warren wrote:
>>> From: Bryan Wu <cooloney at gmail.com>
>>>
>>> mmc dev ${devnum} will return 0 as success even if there is no card
>>> inserted. Booting script like tegra-common-post.h will call mmc dev
>>> ${devnum} to check the mmc device status, it always return 0 even if
>>> mmc_init() fails.
> 
> 
>